Our Best Picks:
Best Value Car Amplifier Reviews:
- Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.
- Rockville dB55 4000 Watt/2000 Watt RMS 5 Channel Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 120 Watts x 4 + 500 Watts x 1 <1% THD+N. 4 Ohm: 80 Watts x 4 + 300 Watts x 1 <1% THD+N.
- RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc). 2 Ohm 240 Watts x 4 + 1000 Watts x 1. 4 Ohm: 160 Watts x 4 + 600 Watts x 1. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm 480 Watts x 4 + 2000 Watts x 1. 4 Ohm: 320 Watts x 4 + 1200 Watts x 1.
- High-Speed MOSFET Power Supply. Rugged switching MOSFETs for Class D in CH5. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Optical Coupler Class “AB” +“D” Technology. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: (CH1-CH4)40Hz –4KHz /(CH5)50Hz –250Hz. High Pass Filter: 15Hz – 4KHz. Subsonic Filter: 15Hz - 55Hz.
- Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: < 0.05%. S / N Ratio: >90dB. Frequency Response: 15-35KHz. Damping Factor: >[email protected] 100Hz. 40 Amp x3. Dimensions: (W x H x L) 9'' x 2.4' x 18.6".
- Power - 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 388 Watts | RMS Power at 1 Ohm: 350 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 8 AWG Power & Ground Input Terminals for Maximum Current Flow
- Stable at 1 ohm | Remote Subwoofer Level Control Included
- 1500W Maximum Power Full-Range Amplifier
- Optimized 150-watt RMS output and a max power output of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
- This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system
- 500 Watts Max Power
- Automatic signal sensing and Turn-On
- Hi-Volt input level control
- Balanced isolator input circuit
- Power - 1500 Watts Max x 1 @2-Ohms, 700 Watts Max x 1 @4-Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- EXTENDED WIRELESS COVERAGE: Adds Wi-Fi range coverage up to 1000 sq ft, and connects up to 15 devices such as laptops, smartphones, speakers, IP cameras, tablets, IoT devices, and more..Connectivity protocol:Ethernet,Wi-Fi
- AC750 WI-FI SPEED: Provides up to 750Mbps performance using dual-band and patented FastLane(TM) technology.
- UNIVERSAL COMPATIBILITY: Works with any wireless router, gateway, or cable modem with Wi-Fi.
- WIRED ETHERNET PORT: Simply plug in game consoles, streaming players, or other nearby wired devices using the one 10/100M port for maximum speed.
- SAFE & SECURE: Supports WEP and WPA/WPA2 wireless security protocols.
- Specifically designed for the 6.2-inch Nintendo Switch only, NOT for 7-inch Nintendo Switch OLED
- Ultra-clear High Definition with 99.9% transparency to allow an optimal, natural viewing experience
- Ultra thin-0.3mm thickness is reliable and resilient, and promises full compatibility with touchscreen sensitivity
- Highly durable, and scratch resistant - surface hardness 9H and topped with oleophobic coating to reduce fingerprints.
- Includes: 2x GLASS Screen Protector, Wet Wipes, Micro-Fiber Cleaning Cloth, Squeeze Card, Easy Installation Use Guide, Hinge Stickers
- Amazon Kindle Edition
- Geier, Michael (Author)
- English (Publication Language)
- 417 Pages - 10/31/2015 (Publication Date) - McGraw Hill TAB (Publisher)
- Scherz, Paul (Author)
- English (Publication Language)
- 1056 Pages - 03/24/2016 (Publication Date) - McGraw Hill TAB (Publisher)
- 8-in-1 ENTERTAINMENT CENTER – With vintage looks & modern features, this turntable plays and records your Vinyls to MP3 (Mac/PC software and USB cable included). It has a CD & cassette player, FM radio, Bluetooth, Aux & headphone jack for audio streaming from your smartphone
- NO STEREO SYSTEM OR EXTRA EQUIPMENT REQUIRED. Get it up and running in minutes. Retro looks combined with the convenience of modern technology make this record player a great value - ideal for beginners & vintage enthusiasts alike
- THREE SPEED BELT-DRIVEN TURNTABLE – This 3-speed (33 1/3, 45, 78 rpm) record player features UPGRADED PREMIUM SOUND QUALITY with minimum vibrations. It is perfect for your living room, bedroom or office and a great choice for vinyl lovers
- ALL THE CONTROLS YOU NEED – Features a volume knob, FM tuner and easy click buttons for input select, power, play/pause/forward/rewind, eject, program, shuffle, repeat, and a full function remote control
- EXPANDED CONNECTION OPTIONS – Extend the sound by connecting external speakers or an amplifier via the RCA Line outputs. For personal listening, plug your headphones into the headphone jack
- HYBRID OFC POWER CABLE: This is a True 10 Gauge Oxygen-Free Copper and Copper-Clad Aluminum Hybrid Power Cable. Our kit features a blend of heavy-duty oxygen-free copper and copper-clad aluminum in a hybrid power cable designed for excellent conductivity, durability, and value.
- IN-LINE FUSE HOLDER: The MAXI and ATC fuse holders are molded and pre-installed in-line with weatherproof covers for convenient installation and superior protection. It is designed for excellent conductivity, durability, and value.
- DOUBLE STRENGTH GROUND TERMINAL: The Double Strength Ground Terminal is a unique pre-terminated ground terminal design that dramatically simplifies installation and improves performance.
- TWISTED PAIR AUDIO CABLES: The twisted pair RCA cables reject noise to provide better sound performance through your amplifiers. Our kit is constructed with heavy-duty oxygen free copper and copper clad aluminum for excellent conductivity durability and value.
- BUY WITH CONFIDENCE: This product is backed by Scosche's Lifetime Tech Support and a Limited Lifetime Warranty, so you can purchase this product with the peace of mind that it will last.
- 750 watt maximum power full-range amplifier
- Amplifier Class: AB
- No. of channel: 2/1 Channel
- Max. Output Power: 750W x 2
- Power - 100 Watts Max X 4 @2-Ohms, 50 Watts Max X 4 @4-Ohms
- Class A/B Topology - Class ‘A’ Amplifiers Have Enormous Amount Of Current Flowing Through Its Output Transistors With No Audio Signal. Class ‘B’ Amplifiers Have No Current Flowing Through Its Outputs With No Audio Signal
- Full Range - With A Full Range Amplifier You Not Only Have The Option To Run Your Speakers, But Also Your Subwoofers
- Variable Gain Control - The Gain Control Is Not For Adjusting Volume. It Simply Adjusts The Amount Of Signal That Is Coming From Your Receiver And Going To Your Amplifier
Last update on 2023-01-12 / Affiliate links / Images from Amazon Product Advertising API