Our 10 Best Picks:
10 Top Underseat Powered Subwoofer Reviews:
- Rockville SS8P 8" 400w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub.
- Enclosure is made out of cast aluminum which stays cool at all times. Peak Power Handling: 400 Watts.
- RMS Power Handling: 100 Watts. Heavy Duty Mounting Feet. PWM MOSFET Power Supply. Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Overload Protection Circuit. Green Power/Red Protect LED. Phase Switch: 0° or 180°.
- Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz. THD: < 0.4%. Subwoofer Level Remote Control. Fuse Rating: Single 15A.
- Specifications: Peak Power 400 Watts. RMS Power: 100 Watts. Impedance: 4 Ohm. Dimensions (L x W X H): 11.4" x 8.3" x 2.8" Inches. Frequency Response: 20Hz - 150Hz. Signal to Noise Ratio: >90dB. Sensitivity: 90dB @ 1w / 1m. Input sensitivity, Low level: 300mV. Input sensitivity, High level: 1.0V
- 30W 8-Inch Amplified Subwoofer.Power source type:Corded Electric.Speaker size:8 inches
- Made with the highest technical quality to ensure maximum reliability and durability
- MAX power handling 300 watts (300 Watts Peak) and an RMS power handling of 120 watts (300 Watts Peak)
- Features variable bass boost, adjustable input sensitivity, and a low-pass filter
- Now includes a 10-inch sub model, along with the 8-inch
- 180 Watt amplifier drives the HS10; 150 Watt amp the HS8
- Ultra-compact at just more than 3" high
- Minimal Parts and Quick-Connect Molex Plug and Harness
- Remote Bass Control Included
- 125W RMS compact powered subwoofer system with Bass Boost of 0dB to plus9dB at 70Hz
- Dimensions (L x W x H): 13-9/16" x 9-7/8" x 2-13/16" (344mm x 250mm x 71mm)
- Frequency Response 35Hz – 120Hz
- 8" Powered Subwoofer
- Car audio Subwoofer
- Rockville USS8 8" 600w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub. 600 Watts Peak / 150 Watts RMS. Heavy Duty Mounting Feet. PWM MOSFET Power Supply. Low Level RCA Input..Impedance: 3 ohm.Speaker size:8 inches
- High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Green Power/Red Protect LED.
- Phase Switch: 0 Degree or 180 Degree. Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 12dB at 45Hz. Subsonic Filter: 20Hz - 50Hz. THD < 0.15%. Subwoofer Level Remote Control. Fuse Rating: Single 20A.
- Specifications: Maximum Power RMS: 150 Watts. Impedance: 3 Ohm. Dimensions: 13.6 x 9.9 x 2.9 (L x W X H) Inches. Frequency Response: 15Hz - 125Hz.
- Signal to Noise Ratio >82dB. Sensitivity: 90dB at 1w / 1m. Input sensitivity, RCA level 195mV. Input sensitivity, HIGH level 5.6V.
- 900 WATT POWER: 10" Amplified Low Profile Subwoofer System offers a maximum power of 900 watts. It lets you pump out some great low-frequency bass volume to enhance the party vibe making it a great addition to your marine music audio system
- BUILT-IN AMPLIFIER: The integrated amp in the compact subwoofer features low pass crossovers & control for adjusting input sensitivity from 0.12V to 3.5V. Includes variable bass boost, control the subwoofer level w/ the remote level control module
- LOW PROFILE:With a height of just 3",it's a perfect solution when space is an issue,it can easily fit under the seat of most vehicles!Total dimension is 14.2”x11.2"x3” & includes mounting hardware. A great addition to your marine stereo sound system
- HIGH LEVEL INPUT: Speaker line inputs are known as high-level inputs. If your head unit does not have RCA outputs, you can use the speaker outputs for the audio source. Use the supplied cable and connect the outputs properly as shown in the manual
- LOW-LEVEL INPUT: Line level inputs, also known as RCA input or low-level inputs. Low-level inputs are the recommended way to introduce the audio signal to the hideaway subwoofer if RCA outputs are present on your head unit or other signal sources
- Power Handling: Peak: 550 watts RMS: 200 watts
- PWM MOSFET Power Supply/Thermal Protection Circuit Remote Subwoofer Control Included RCA and High-Level Inputs
- Delayed Soft Remote Turn On Adjustable Input Sensitivity
- Variable Bass Boost: 0 - +12 dB Variable Low-pass Filter: 85 - 150 Hz
- Constant Subsonic Filter: @ 35Hz Selectable Phase : 0 or 180 degrees
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Package Includes: (1) Rockville SS8P 400 Watt Slim Under-Seat Active Powered Car/Truck Subwoofer Sub, (1) Rockville RWK10 10 Gauge Amp Installation Kit ANL Fuse Holder 100% Copper RCA
- Rockville SS8P 8" 400w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub. Enclosure is made out of cast aluminum which stays cool at all times. Peak Power Handling: 400 Watts. RMS Power Handling: 100 Watts. Heavy Duty Mounting Feet. PWM MOSFET Power Supply. Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Overload Protection Circuit. Green Power/Red Protect LED. Phase Switch: 0° or 180°. Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz. THD: < 0.4%. Subwoofer Level Remote Control. Fuse Rating: Single 15A
- Peak Power 400 Watts. RMS Power: 100 Watts. Impedance: 4 Ohm. Dimensions (L x W X H): 11.4" x 8.3" x 2.8" Inches. Frequency Response: 20Hz - 150Hz. Signal to Noise Ratio: >90dB. Sensitivity: 90dB @ 1w / 1m. Input sensitivity, Low level: 300mV. Input sensitivity, High level: 1.0V
- Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17' 10 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3' 10 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 40 Amp ATU Inline Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets . Soft abrasion proof insulating jacket allows for 100% improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
- 200-watt max, 120-watt RMS power output
- Designed to add extra bass to a car audio system that’s short on space
- built-in matched amp eliminates need to buy a separate amp, saves space, and easier to install
- Frequency response: 50 Hz to 150 Hz
- 8 in. preinstalled woofer
Last update on 2023-01-12 / Affiliate links / Images from Amazon Product Advertising API