Quick Picks:
The 10 Best Subwoofer And Amp Reviews:
- Complete Amplified Bass Package Bundles 2 X 12 Subwoofer Enclosure And Mono Block Amplifier.Power source type:Corded Electric.Speaker size:12 inches
- Product Type : Car Audio Or Theater
- Variable Low- And High-Pass Filters Offer 40Hz–400Hz Range For Sound Shaping
- Tne212D2 Enclosure Features Dual 12-Inch Terminator Subwoofers With 1200 Watts Max Power
- Package Includes: (1) PRORECK PR-1500.1M 1500W Amplifier, (1) dual 12" Car Subwoofer, (1) Complete Amp Installation Wire Kit.
- PRORECK PR-1500.1M Dual 12” Car Subwoofer enclosure system with matching mono block amplifier. 1500 watts peak power/ 400 watts RMS. The surface is high quality aviation grade tweed carpet and has embroidery. The angle is 15%, close to the perfect vehicle bass alignment. Frequency Response: 15Hz - 20kHz. Power Output: 200 Watts RMS Mono-block at 4 Ohms and 1% THD+N. 4-Ohm Mono-Block Class A/B. Dynamic Power: 400 Watts @ 2 Ohms.
- This system includes a top-level Enclosure with more powerful and rich bass. It also includes a mono block bass amplifier. This mono amplifier is built just for loud bass.It feature high power 1.5" aluminum 4-layer voice coils with bumped and vented magnet motor structures among other features. It has efficient bass response with deep and clean sound.
- Amplifier with full range RCA output, RCA line input, high level input, bass EQ, dashboard remote, etc, meet all your needs.And amplifier contains mute circuit, bass optimization circuit, protection circuit, thermal protection, speaker short circuit protection, input overload protection and DC offset protection,make users have a better experience. Rich wire set, can meet your complete needs.
- Wiring Kit Features:(1)High Grade Twisted Pair 100% Copper RCA Cables,(1)Blue Super Flex Power Cable,(1)Black Ground Wire,(1)Black Remote Cable and (1)Remote control,(1)Black Split Tube,(1)Speaker Wire,(1)Gold Plated ANL Heat Resistant Fuse Holder,(1)30 Amp ANL Gold Plated Fuse.Accessories: Wire ties, ring terminals, butt connectors, spades and grommet. Amplifier dimensions: 11 x 9.1 x 1.9 inches (L x W x H) Subwoofer dimensions: 28.7 x 14.2 x 15.7 inches (L x W x H)
- Rockville RV12.2B 1200W dual 12" Car Subwoofer Enclosure amplifier+amp kit
- Rockville RV12.2B Dual 12” bass enclosure system with matching mono block amplifier. 1200 watts peak power/ 400 watts RMS cea-2031 rating. Dual 12” bass enclosure system with matching mono block amplifier. Quasi transmission Line cabinet design.
- Angled at 15% for near perfect in vehicle bass alignment. Exterior: high quality aviation grade tweed Carpet. Oversize Rockville Shield embroidery. Mono, Gold-plated push style, speaker terminal. Dual, high-power, high-efficiency 12" Subwoofers.
- 1200 watts peak power. Power output: 200 watts RMS cea-2006 power @ 4-Ohm and 97DBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20Khz (-3Db). RMS power: 400 watts @ 2 ohms. 4 ohm mono-block class A/B.
- 17" High grade twisted pair 100% Copper RCA cables. 17' 8 gauge translucent Blue Super flex Power cable. 3' 8 gauge clear super flex ground wire. 17' 18 gauge Blue remote cable. 17' 16 gauge speaker wire. Gold Plated anl heat resistant fuse holder
- 1300 W Max Power (350 W Nominal) Pre-loaded 12" Injection Molded Polypropylene (IMPP) Composite Cone Construction Subwoofer
- Built-in 300 W Max (150 W RMS) Class D amplifier
- Ported enclosure design for powerful, deep and accurate bass response
- Variable Bass Boost (0 to +12 dB, 20Hz to 130Hz)
- Loaded Sub Enclosure Features: Rockville Single 12" K5 1400w Car Subwoofer Pre-loaded In Vented Sub Enclosure. Peak Power Handling: 1400 Watts. Program Power Handling: 700 Watts.
- CEA Rated RMS Power Handling: 350 Watts. Final Impedance: 4 Ohm. ¾” MDF enclosure. Bonded stapled and braced. Computer designed vents. Angled at 15 % for perfect bass alignment. High quality aviation grade tweed carpet.
- Satin Nickel speaker wire push terminals. Enclosure air space is 1.52 Cu Ft per sub. Vent dimensions (inches): 2.25" x 7" x 8.5". Tuning frequency of enclosure: 35 Hz. 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire.
- Features of Amplifier: Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote.
- CEA Compliant Power Ratings (Rated at less than 1% distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.).
- SUBWOOFER AND WIRING KIT: This package comes with MTX 12" Dual Loaded Car Subwoofer, Sub Box, Amplifier, and QPower Wiring Amp Kit
- SUBWOOFER ENCLOSURE: Dual 12 inch vented enclosure with a single terminal cup; 2,000 watt of max power, 1,000 watts RMS; Enclosure measures 29.5 x 13.5 x 11 x 14 inches
- LIGHTWEIGHT DESIGN: Polypropylene dust caps are durable and lightweight, allowing them to use less power; Vented design is tuned for harder hitting base
- SUPER FLEX AMP KIT: Handles up to 3000 watts of power; 4 gauge wiring; Kit includes: Deluxe high quality fuse holder, Gold plated ANL fuse (100 amps), 17 feet of 4 gauge Super Flex orange power cable, 3 feet of 4 gauge Super Flex blue power cable, 17 feet of 18 gauge blue turn on wire, 25 feet of 16 gauge Super Flex speaker wire, 17 feet of deluxe RCA interconnect
- 3 grommets, 5/16 inch gold plated ring terminal, 1/4 inch gold plated ring terminal, Number 10 gold plated ring terminal, 4 gold plated speaker terminals, 20, 4 inch wire ties
- Rockville RV10. 2B 1000w Dual 10" Car Subwoofer Enclosure+Mono Amplifier+Amp Kit
- Rockville RV10. 2B Dual 10” Bass Enclosure System With matching Mono Block Amplifier. 1000 Watts Peak Power / 350 Watts RMS CEA-2031 Rating. Dual 10” Bass Enclosure System with matching Mono Block Amplifier. Quasi Transmission Line Cabinet Design. Bonded, Stapled and Braced 3/5" MDF Cabinet. Computer Designed, Under-Side Bass Reflex, Aero-Port System.
- Angled at 15% for near perfect in vehicle bass alignment. Exterior: High quality aviation grade tweed carpet. Oversize Rockville Shield Embroidery. Mono, gold-plated push style, speaker terminal. Dual, High-Power, High-Efficiency 10" Subwoofers. Injection Molded, Talc Filled, Brushed Polypropylene Cones
- 1200 Watts Peak Power. Power Output: 200 Watts RMS CEA-2006 Power @ 4-ohm and 97dBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20KHz (-3dB). RMS Power: 400 Watts @ 2 ohms. 4 Ohm Mono-Block Class A/B.
- High Speed MosFET Power Supply with 50 Volt Rail. BiPolar Audio Transistor Output Section. RCA Line Input. RCA Line Output - Full Range. High Level Speaker Line Input. OEM Integration Auto-Start Turn On Circuitry. Dashboard Bass Remote Control with Cable
- A plurality of radiating holes are arranged on both sides to ensure the heat dissipation and avoid the sound box burning.
- Has a professional single channel power amplifier template, including bass filter, bass enhancement, high-frequency power controller, remote control by wire and other high-end functions.
- All aluminum alloy body, to minimize vibration caused by noise, to ensure that in a long time, high load performance in the environment stable and reliable.
- 10 Inch 12V 250W Black Ultra-Thin Under-Seat Car Active Subwoofer Speaker
- All-in-one complete SDR series loaded Subwoofer complete bass package
- Peak Power: 1, 200 watts | RMS Power: 600 watts
- Includes x1 Skar Audio sdr-1x10d2 single 10" Loaded 1, 200 watt vented subwoofer enclosure
- Includes x1 Skar Audio rp-800.1D class D 800 watt mono-block amplifier
- Includes x1 Skar Audio skar4anl-cca 4 gauge complete amplifier wiring kit
- Rockville RBV10. 1A Single 10” 500 Watts Active Subwoofer Enclosure, Size: 10”, Peak Power: 500 Watts, RMS Power: 300 Watts, Nominal Impedance: Single 4-Ohm, 1. 5” Voice Coil, Inverted Carbon Graphite Molded Dust Cap, Kevlar Reinforced Pulp Cone, Double Lami
- Frequency Response: 35Hz - 200Hz, Sensitivity: 88dB, Anti-Vibration Braced MDF Cabinet, Angled Back Fits Perfectly Against Rear Seats, Computer Tuned Bass Reflex Port, Blue/Black Aviation Grade Tweed Carpet with Embroidered Rockville Logo.
- Class AB Amplifier, High Speed MOSFET Power Supply, High Level Speaker Inputs, Low Level RCA Inputs, Built-In Low Pass Crossover (30Hz - 160Hz).
- Accepts up to 8 Gauge Wire, 100mV - 5V Input Voltage, Power (Blue) & Diagnostic (Red) LED Indicators, 20A Fuse, Dimensions in inches: Length 15. 75" x height: 12. 99" x top width 10. 63" x bottom width: 14. 17", Weight: 22. 59 lbs.
Last update on 2023-01-12 / Affiliate links / Images from Amazon Product Advertising API