Our 10 Recommendations:
10 Top Sound System For Car Bass Reviews:
- The APP122 Dual 12” bass package comes with EVERYTHING INCLUDED! 2 Subwoofers in Ported Enclosure | Monoblock Amplifier with Bass Knob | Complete Amplifier Wiring Kit | With a power handling capacity of 1500 Watts Max (500 Watts RMS), this is all you need!
- Mono Block amplifier features a thermal protection circuit, nickel plated terminal blocks, powder coated chassis, comes with a THD level of 0.2%, and a bass boost control to connect near the driver for optimum loudness control.
- The amplifiers built-in protection circuitry protects your system from input overload, short circuit, and high temperatures. When protection mode is enabled, the LED indicator on the side panel will illuminate.
- Our professional installation 8 AWG amp kit provides a 17’ power cable, 3’ ground cable, 17’ remote turn on wire, 17’ RCA cable, ATC fuse, and accessory wire-ties.
- The ported enclosure is constructed of MDF (Medium-density fiberboard) with black carpet measured at 13.75” high, 29.5” wide, and a depth of 13.5” bottom/9” top.
- 1000 WATT POWER: This high powered subwoofer system has a maximum power output of 1000 watt / 500watt RMS for full range surround stereo sound reproduction and impressive bass response so you can play your favorite tracks as loud as you want.Impedance: 4 ohm.Power source type:Corded Electric.Speaker size:0.01 inches
- BUILT TO LAST: Features non-fatiguing rubber suspension, specially designed rubber magnet boot, non-press cone, specially treated foam surround, along with bumped and vented motor construction that keeps your equipment safe for extended excursion
- DUAL 4 OHM IMPEDANCE: The audio projection subwoofer has 90 dB and dual 4 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound
- DUAL VOICE COIL: This complete subwoofer features 50 oz magnet structure and 2 inch 4 layer dual voice coil to enhance its performance and can handle higher operating temperatures. it also has spring loaded push down speaker terminals
- 10" STANDARD SIZE: Pyle easy to mount car speaker follows the standard size for most vehicle stereo system. It has a 4.7" mounting depth and 10" overall diameter. Perfect for new speaker construction or replacing worn / blown speakers
- POWERFUL SOUND: Deliver powerful sound to your speakers and subwoofers with this Super D Class, 4,000-watt, mono car audio amplifier; Wired bass remote included
- OPERATION: Control your sound with mono only operation, variable electronic crossover, and electronic equalizer capabilities; Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel
- OUTPUT TECHNOLOGY: Ultra-Fi MOSET output device technology and classic Hifonics aluminum construction for powerful sound, efficient cooling, and minimal distortion
- CONNECTORS: Secure molded connection terminal with easy-to-access, angled ports for all power, ground, and speaker connections and high-temperature, impact-resistant, nickel-plated connectors; Nickel-plated connectors deliver efficient high/low level audio, crisp sound, while providing a secure and erosion-resistant seal
- POWER: Power ratings: @ 1 ohms - 1 channel x 4,000 watts; @ 2 ohms - 1 channel x 2,200 watts; @ 4 ohms - 1 channel x 1,100 watts; Dual coil Pulse Width Modulated power supply keeps voltage constant through Ultra-Fi output devices
- Wirelessly connect up to 2 smartphones or tablets to the speaker and take turns playing impressive stereo sound
- Built-in 3000mAh rechargeable li-ion battery supports up to 12 hours of playtime
- IPX7 waterproof means no more worrying about rain or spills; you can even submerge flip 4 in water
- Ubl connect+ allows you to link more than 100 JBL connect+ enabled speakers together to amplify the party
- Power - 800 Watts Max x 2 @2-Ohms 400 Watts Max x 2 @4-Ohms 1600 Watts Max x 1 Bridged @4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers but also your subwoofers
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Variable Gain Control - The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Shrink-wrapped
- Audio CD – Audiobook
- English (Publication Language)
- 03/28/2023 (Publication Date) - Elektra Catalog Group (Publisher)
- Bryant, Nick (Author)
- English (Publication Language)
- 09/01/2016 (Publication Date) - Hinkler Books (Publisher)
- All-in-One Complete EVL Series Subwoofer Bass Package
- Peak Power: 2,000 Watts | RMS Power: 1,000 Watts
- Includes x1 Skar Audio EVL-1X10D2 10" Loaded 2,000 Watt Vented Subwoofer Enclosure
- Includes x1 Skar Audio RP-1500.1D Class D 1,500 Watt Monoblock Car Subwoofer Amplifier
- Includes x1 Skar Audio SKAR4ANL-OFC 4 Gauge Premium OFC Complete Amplifier Wiring Kit
Last update on 2023-03-27 / Affiliate links / Images from Amazon Product Advertising API