Our Best Picks:
Best Shop Vacuum For Woodworking Reviews:
Bestseller No. 1 
10 Foot Long Dust Collection Power Tool Hose Kit with 6 Threaded Fittings/Attachments for Multiple Types/Brands of Power Tools and Work Shop Vacuums
- The smaller diameter 1-3/16" O.D. (Outside diameter) flexible dust collection power tool hose moves freely when connected to your power tools and vacuum. This gives you the ability to plug into different tools to add dust collection at a moments notice. The hose and its specialized fittings work with multiple power tools, workshop vacuums, jigs and other tools around your woodworking shop or work shop.
- The small rubber fitting threads on to the end of the hose and is ideal for connecting random orbital sanders, palm sanders, biscuit joiners or any other power tool with smaller dust collection ports. The small thread-on rubber fitting has a 1 inch I.D. with a 1-3/16 inch taper up to 1-1/4 inch O.D. This kit will also work with popular tools like the K4 and the K5 Pocket Hole Jig. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage
- The large thread-on rubber fitting has a 1-1/2 inch I.D. with a 1-13/16 inch O.D. which works on many other power tools. The rigid plastic vacuum Plug-in Adaptor has a 2-1/4 inch taper up to 2-5/16 inch O.D. The adaptor is designed to plug into most standard workshop vacuum ports. The Plug-in Adaptor conveniently threads onto the power tool hose so it will never slip off!
- Included inside the box: 1 each ten foot long 1-3/16 inch O.D. small diameter flexible hose, 2 each small flexible rubber thread-on fitting, 2 each large flexible rubber thread-on fitting and 2 each Plug-in Adaptor shop vacuum that will allow you to connect the hose to most commercial or residential workshop vacuum ports.
- IMPORTANT! CHECK YOUR POWER TOOL PORT DIMENSIONS: Before placing an order, please check the inner and outer (I.D. and O.D.) diameter of your workshop vacuum ports and power tool ports to make sure the hose and fittings will properly fit and work for your needs. THE I.D. AND O.D. ON THE RUBBER END FITTINGS AND HOSE ARE APPROXIMATE SIZES AND MAY SLIGHTLY VARY.
SaleBestseller No. 2 
2 1/2" x 20' Clear PVC Dust Collection Hose For Use with Dust Collectors with 2-1/2" Ports. Ideal for Shop Vacuums
- When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won’t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20° F to 165° F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
SaleBestseller No. 3 
POWERTEC 70257 15 Ft. Dust Collection Hose Kit Hose with 2 Fittings for Woodworking Power Tools Home and Wet/Dry Shop Vacuums
- INCLUDES: 15’ Long (1-13/16” OD) Hose with 2-1/4” OD Connector, 1” ID Quick Change Adapter, 1-1/2” ID Quick Change Adapter
- FUNCTION: A premium, heavy-duty dust collection hose and dual set of quick connect hose fittings designed for power tools with small dust ports
- HOSE DESIGN: Vacuum hose is made out of ultra flexible Ethyl Vinyl Acetate (EVA), delivering high impact resistance and is designed to move seamlessly (kink-free) with your power tools for convenience and optimal workflow
- HOSE FITTINGS: Accommodate most standard shop vacuum ports, feature free range mobility with swivel adapters, and are constructed out of high quality rubber for long-term durability
- APPLICATIONS: This small port hose kit works exceptionally well with an assortment of power tool dust collection sanders, jointers, planers, miter saws and dust extractors from many popular brands. Fits Rockler, Festool, Porter Cable, Shop Vac and others
Bestseller No. 4 
Counter Brush for Furniture, Drafting, Patio, Bed, Fireplace, Woodworking Cleaning, Shop Brush, Hand Broom Brush with Horsehair Bristle, 2 Premium Microfiber Cleaning Cloth Included
- Ergonomic Handle - The curved shape and well crafted handle are made from high quality natural hardwood, features 13'' large fox tail shape, this bench brush allows you to grasp the handle comfortably all time while dusting.
- Natural Product - Filling by the great quality soft and long horsehair bristles with a size of 2.6 inches, The best AMERWASH PLUS counter brush is definitely static free and won't make any scratching while cleaning on delicate surfaces.
- Multi-Function - The beautiful brush could be used as a furniture brush, cars interior duster, and perfect to remove eraser poop while drafting. The gentle pure horsehair bristle also works wonderfully to remove hair or dust from your bed sheet, sofa, lampshades, fedora hat. It is great gift for a gardener, to have them a practical, memorable gift that will make cleaning their workspace easier.
- Value Pack - You will get one premium quality AMERWASH PLUS varnished counter brush, and 2pcs hight quality waffle microfibre cleaning cloth with a size of 12x12 inches.The best combination can satisfy your daily cleaning needs
- Easy to store - This classic hand broom brush comes with a PU leather strap on the handle, and microfiber cleaning cloth sewing with a hanging rope for easier storage.
Bestseller No. 5 
Setting Up Shop: Plans & projects for every size workshop
- Magazine, Woodsmith (Author)
- English (Publication Language)
- 98 Pages - 03/26/2020 (Publication Date) - Independently published (Publisher)
SaleBestseller No. 6 
Stanley - SL18116P Wet/Dry Vacuum, 6 Gallon, 4 Horsepower Black
- ❤【LARGER CAPACITY】Stanley SL18116P Wet / Dry Vacuum has a larger capacity over 22 L, makes small clean-up jobs a breeze for you as you don’t have to empty the bucket frequently any more
- ❤【VERSATILE & POWERFUL】Thanks to the 4 peak HP motor, this vac offers powerful enough suction needed to almost any cleanup jobs in vehicle, jobsite, workshop, garage, basement, van, house, etc
- ❤【3 in 1 FUNCTION】With this versatile vac you can vacuum both wet liquid spills and dry debris, dust, saw, dirt or blow leaves away(use blower port), just organize the hose and power cord on top handle and side wraps after using, conveniently
- ❤【FARTHER CLEANUP】With over 16 ft of cleaning reach(6 ft hose, 10 ft power cord and 3 pieces of extension wands) it’s easy to do a farther cleanup for you without unplugging the unit, while it has four swivel casters for convenient and easy manoeuvrability
- ❤【WHAT YOU GET】Stanley SL18116P Wet / Dry Vac x 1, 1-1/4"x6’ super flexible hose x 1,extension wands x 3, gulper nozzle, floor nozzle x 1,crevice nozzle x 1,foam filter x 1, dust bag x 1, reusable dry filter x 1, 12-Month Warranty
Bestseller No. 7 
SENCTRL Automatic Vacuum Switch Allow Power Tool/Table Saw To Turn Vac Cleaner/Accessory On And Off Automatically, Load Sensing, On Delay Prevent Circuit Overload, Shop Dust Collector Off Delay
- NEW GENERATION: Add a manual switch to support three vacuum run modes: Auto, Off and On. You can not only turn the vacuum on/off automatically with the power tools, but also manually turn the vacuum on/off all time according to your actual condition.
- HIGH-QUALITY MATERIALS: Adopt 19.7 inch UL-certified US standard 14AWG power cord which allow passage with a large current more than 30A. Durable PC+ABS V0 grade flame retardant material case, reduce heat during use and extend service life.
- TURN ON DELAY. Load Sensing Technology. If the load connected to the 'TOOL' port exceeds 30W, the vacuum connected to the 'VAC' port will automatically delay 1s to start, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time.
- SHUT OFF DELAY: Automatically delay vacuum turn-off by 7s to continue clearing the remaining airborne debris after the load connected to the 'TOOL' port has stopped. Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems.
- COMPATIBILITY: Support a wide range of cutting tools from handheld devices to large shop saws such as table saw, miter saw, track saw, chop saw, sander, router table, planers, shopvac, remote control outlet, automated vacuum switch, dust collection systems for woodworking and etc. Power rating should not exceed 120 VAC, 15 Amp, 60 Hz, 1875w.
SaleBestseller No. 8 
DCT Dust Collector Accessories Kit – 1.25in x 10ft Vacuum Hose, Dust Collection Fittings, and Vacuum Reducer
- ENHANCE DUST COLLECTOR EFFICIENCY: Create a vacuum system with the DCT | Woodworking Dust Collection 1.25” x 10’ Dust Hose with Fittings & Reducers and use to collect shavings and dust from your woodworking power tools; Use as the last stage from your dust collector to your tool with 2.5-inch (6.4cm) ports with 1.5-inch (3.8cm) accessories; Shopvac hose pairs with dust extractors and dust collection systems (not included) to prevent dust buildup
- PERFECT SIZE: 1.25-inch (3.2cm) outside diameter (OD) and 1-inch (2.5cm) inside diameter (ID) with a 1.2-inch (3cm) OD and 1-inch (2.5cm) ID small end fitting, 1.75-inch (4.4cm) OD and 1.5-inch (3.8cm) ID large end fitting, and 2.5” x 1.5” inch (6.4cm x 3.8cm) reducers to fit your attachments (measure application to ensure fitment); 10-foot (3m) long vacuum hose for ample room to reach your equipment; Small diameter for flexibility and maneuverability; Ribbing offers secure handling grip
- LET THE MAGIC HAPPEN: Included fittings screw into each end of the shop vacuum hose and fit snugly with the fittings on your existing power tools; The small end of the dust collection pipe is ideal for connecting a random orbital sander, palm sander, biscuit joiner, or any other power tool with small dust collection ports – Check the inner and outer (ID and OD) diameter of your vacuum ports and power tool ports
- VARIOUS APPLICATIONS: Designed to carry away sawdust, powder, wood chips, saw tailings, and fume ventilation from your woodworking equipment; Flexible construction and tight bending radius allow you to maneuver and position the flexible vacuum hose anywhere in your shop without worrying about kinks; Works with most routers, saws, miter saws, or any other small power tool connections (measure for exact fitment)
- BUILT TO LAST: Flexible dust collection hose constructed from ABS plastic with ribbing for maximum strength and longevity; Durable enough to not collapse under the pressure of your dust collector equipment while still remaining flexible; Includes rubber fittings that attach on both ends along with plastic reducers for your convenience
Bestseller No. 9 
Fein Turbo I Wet/Dry Vacuum Cleaner with Dust Extractor and Attachment Set - 5.8 Gallon, 151 CFM Suction Capacity, 98 PSI Static Water Lift - 92035060090
- Outstanding Performance - The dust extractor is very effective at dust collection when attached to power woodworking tools or used for car vacuum detailing or even to keep your carpet or upholstery cleaner. Ideal for industrial job site or DIY use.
- Clean Up Any Mess - Whether it's a liquid, dust, or debris, this wet dry vacuum cleaner will take care of it in no time. With a large 8.5-gallon tank and powerful 151 CFM suction capacity, you'll be able to clean up any mess in record time.
- Industry Made - It has an autostart outlet with power-on delay to prevent current spikes, anti-static function against electrostatic charging, and tool coupling with suction control for easy control of suction power.
- Convenience + Versatility - Our practical storage area with rim lets you leave your tool bag on top as you move around or have a DIY cyclone dust extractor addition.
- German Engineered, German Quality - FEIN is a well-known global company with German roots that manufactures high-quality power tools and accessories created for the toughest jobs in the metal and interior industries.
SaleBestseller No. 10 
Cyclone: A Linear Tactical Romantic Suspense Standalone
- Audible Audiobook
- Janie Crouch (Author) - Tom Campbell (Narrator)
- English (Publication Language)
- 04/24/2020 (Publication Date) - Calamittie Jane Publishing (Publisher)
Bestseller No. 11 
Cyclone
- Amazon Prime Video (Video on Demand)
- Arthur Kennedy, Carroll Baker, Lionel Stander (Actors)
- René Cardona Jr. (Director)
- English (Playback Language)
- English (Subtitle)
SaleBestseller No. 12 
POWERTEC 70175 Dust Collection Hose with Fittings Plus Two Reducers , Black
- PLEASE NOTE: As configured, the hose set will connect your 1”OD port tools to a shop vac or 2-1/2” dust collection system. The hose is designed to be small and flexible to help provide greater ease in sanding. Please refer to the detailed images to verify that the size and configuration fits your application or expectations. If you need to connect your shop vac or 2-1/2” dust collection system to a 1-1/2” tool port, an additional 1-1/2” screw on adapter, Powertec 70296, is available. Simply remove the 1”ID adapter and replace it with the additional 1-1/2” ID adapter
- INCLUDES: (ONE) 10ft dust collection hose, (ONE) 1" pliable plastic hose fitting, (ONE) 1-1/2" pliable plastic hose fitting, (ONE) 2-1/4" ABS dust hose adapter, and (ONE) 2-1/2" ABS dust hose adapter
- APPLICATION: Allows you to extend the reach of your shop vacuum or dust collecting power tools with a long, flexible and premium quality vacuum hose that is free roaming and able to suck up dust, dirt and debris
- VERSATILE: Offers a dust collection power tool hose with fittings that work with most small vacuums, shop dust collection systems, orbital sanders, joiners, jigs and other power tools. The nominal 2-1/4” adapter should fit most shop vac ports with a nominal ID of 2-1/4”. Shop Vac ports sizes can vary between different manufacturers. Please refer to the actual adapter sizes before ordering, to verify that it will work for your application
- DIMENSIONS: Dust collector hose 1-3/16" O.D x 10ft long | ABS vacuum dust hose adapter nominal 2-1/2" O.D actual 2-27/64”| ABS vacuum dust hose adapter nominal 2-1/4" O.D actual 2-19/64” |Small pliable plastic fitting 1" I.D | Large pliable plastic fitting 1-1/2" I.D
Bestseller No. 13 
Shaper (Missing Shop Manual): The Tool Information You Need at Your Fingertips (Fox Chapel Publishing) Accessories, Setup, Making Cuts, Vacuum Jigs, Doors, Windows, Handrails, and More
- Skills Institute Press (Author)
- English (Publication Language)
- 88 Pages - 05/01/2011 (Publication Date) - Fox Chapel Publishing (Publisher)
Bestseller No. 14 
Automatic Vacuum Switch, Ortis Dust Control Autoswitch for More Power Tools, Delay Vacuum On/Off to Prevent Circuit Overload and Tripping, Adjustable Actuation Threshold
- NEW GENERATION: Addition of two tool outlets, no need extra extension socket, avoid messy cords and save time; Three vacuum run modes can be switch freely: Auto, Off and On; The values are clearly displayed with LED indicators, each key for corresponding option, easier to check and set.
- CONFIGURABLE ACTUATION THRESHOLD: 30W/60W, you can select flexibly appropriate actuation threshold according to your actual condition. Prevent vacuum from running too long or being unable to shut off after tool has stopped.
- CONFIGURABLE SHUTOFF DELAY TIME: Automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency.
- TURN ON DELAY & SAFETY: Automatic delays 1s to turn on the vacuum when you start your tool, which avoids circuit overload or tripping. Adopting UL-certified American Standard 14AWG power cord which allowable passage with a large current more than 30A. Thick copper core, covered with PC+ABS V0 grade flame retardant material, less heat during use and extend service life.
- COMPATIBILITY: Supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Table Saws, Power Sanders, Routers, Joiners, Planers etc. Max motor rating should not exceed 120V/15A 50/60Hz, 1875W.
Bestseller No. 15 
CNC Engraving Machine Dust Shoe For 85mm Spindle
- Spindle diameter: 85mm / 3.35inch, vacuum port: 97mm / 3.82inch,Other dimensions are shown in the picture，Please confirm the diameter of your router before choosing.
- The product is made of high-quality nylon, stable performance, widely used in engraving machines and woodworking machinery and equipment.
- It is used to quickly remove sawdust and dust, so as to keep the worktable clean and tidy.
- This brush is easy to remove and replace when worn.
- Assembly and installation of this product is very simple, and it is easier to replace the drill bit.
Last update on 2023-01-12 / Affiliate links / Images from Amazon Product Advertising API