Our Top 15 Recommendations:
Our Favorite Rv Stabilizer Jacks Reviews:
Bestseller No. 1 
Quick Products QP-RVJ-S24 RV Stabilizing and Leveling Scissor Jack, 5,000 lbs. Max, 24" - Pair, Silver
- Stabilizer jacks mount to the underside of your RV and lower down to stabilize and level the RV at the campsite.Fit Type: Universal Fit
- 5,000 lbs. maximum capacity
- Maximum Height: 24"; Retracted Height: 4"
- Do not use for lifting purposes
- Mounting hardware is not included - Pre-drilled mounting holes (8mm or 5/16") and mounting slots (10mm or 3/8") are provided for your convenience
Bestseller No. 2 
ROCKMAN RV Camper Trailer Stabilizer Leveling Scissor Jacks w/Socket & Level 24'' 7500lbs Set 2, black (26085)
- StabIlizing and leveling your RV/Trailer
- Remains steady on soft surfaces because of wide bow-tie base
- Includes 2 steel jacks, one 3/4 inch hex magnetic socket to raise/lower jack faster by power drill, Also include one 3-bubble magnetic level
- Extended height: 24 inch , Retracted height: 4 inch , retracted length: 26-1/2 inch , width: 7.5 inch
- Capacity: 7,500 lbs per jack
Bestseller No. 3 
Set 4 LIBRA 9K lb Heavy Duty 24" RV Trailer Stabilizer Leveling Scissor Jacks w/Dual Power Drill Sockets & Complete Set of Mounting Hardware -Model# 26098
- True HEAVEY DUTY 9k lbs# capacity, made by heavy 11ga steel. Strongest jack in the market!
- Includes 4 steel jacks, also include a 3/4" hex magnetic socket to raise/lower jack faster by power drill!
- Aslo include 16 pcs 3/8" mounting screws & matching 9/16" socket, a 11/36" mounting hole drill bit, one set of drilling guide sticker, everything you need for install!
- Capacity: 9K lbs per jack. Extended height: 24", Retracted height: 5", Retracted length:26", width: 7.5"
- For RV stablizing and leveling purpose only, NEVER use for lifting, changing tires or supporting weight of any vehicles,
Bestseller No. 4 
Valterra 020106 RV Stabilizer
- Folds for easy storage
- Using two--front and rear or on both sides--makes RV rock solid
- Sets up in minutes, no tools needed
- Fits frames 14"H to 28"H
SaleBestseller No. 5 
RVGUARD RV Stack Jacks 4 Pack with Storage Bag, Aluminum Stabilizer Jacks for RV Trailer Camper, Single Support Up to 6000 Lbs, Adjustable from 11" to 17"
- 【What will You Get】4 Pack RV Stack Jacks come with a colorful storage bag, which is ideal for stabilizing and leveling your RV, a great stabilization solution for your RV, trailer, camper, etc.
- 【Make Your RV Stable】These RV stabilizer jacks are made of durable cast aluminum, anti-rust & corrosion resistant, with a square base design, each can support up to 6000lbs, with which you needn’t worry about your RV moving or bouncing anymore.
- 【Height Adjustable】The height of the RV stabilizing jack can extend from 11" to 17", they may not rise very high, thus are recommended to use for lower to-the-ground rigs for sure. Please Note: These jacks are only for stabilization usage. Do Not Use To Raise.
- 【Easy to Use】Simply position each stack jack stand underneath your RV and spin the “T” shape handle to raise it to the proper height to reach appropriate leveling and stabilization. Recommend placing wood or concrete blocks under jacks for better use.
- 【Lightweight & Portable】 These RV jack stands weigh less than 40 lbs in total and come with a colorful organized bag; besides, when not in use, they can be compacted and nested together for easy storage.
SaleBestseller No. 6 
Camco Olympian Aluminum Jack Stands, Support up to 6,000 lbs, Pack of 4 ( 44560)
- RV Jack Stands: These trailer support stands stabilize and level your RV; designed to provide RV positioning and stability
- Durable Construction: The RV stabilizer jacks are made from durable cast aluminum; each stabilizer jack can support up to 6,000 lbs
- Easy to Use: Position each stack jack underneath your RV and raise to the proper height to reach appropriate leveling and stabilization; these jack stands extend from 11 inches to 17 inches
- Package Includes: A set of four stack jacks
- Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the outdoors to the next level
Bestseller No. 7 
WEIZE RV Trailer Camper Stabilizer Leveling Scissor Jacks with Handle 24" 7500lbs Set of 4
- This RV stabilizer features 7,500-lb capacity which helps to keep your trailer level and stable. It adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.
- Extended height: 23‐3/4”; Retracted (collapsed) height:5”.
- Tooth gear design of the camper scissor jack arms ensures straight line vertical extension and retraction, the jack raises quickly and the crank handle turns easily.
- Includes: 4 leveling scissor jacks, 1 crank handle .
- 1-Year limited warranty!
Bestseller No. 8 
Dumble RV Stabilizer Jacks Camper Leveling Blocks 2-Pack – Heavy Duty Leveling Blocks for Trailer, Camper, Motorhome
- NO MORE SWAYING: Use the Dumble | Camper Stabilizer RV Leveling Blocks to stabilize, secure, and level your RV, camper, or travel trailer; Transfer weight on a constant vertical plane, support a car in storage to save from a tire going flat, use on trailer with single axle to keep the trailer from tipping back with too much weight in the wrong places, use under weak steps, or place in crawl space to stop floor creaks and rattles; For stabilizing only recreational vehicles – Do not use to raise
- FITS YOUR RV & TRAILER: Adjustable from 11.5 inches to 17.5 inches (29.2cm to 44.5cm); Make sure the height is correct for your use; Includes 6.2” x 6.2” x 8.75” inch (15.7cm x 15.7cm x 22.2cm) base and 6” x 8.8” inch (15.2cm x 22.3cm) threaded rod; Rod includes 1.75-inch (4.4cm) diameter slightly dished pad that makes a tight connection under your application
- BUILT TO LAST: Each jack supports up to 6,000 pounds (2,722kg) or 3 Tons (2.7MT); All components constructed from aluminum for maximum strength and longevity that resists corrosion; RV levelers nest into each other (stack) for storage
- EASY TO USE: The long bolt in the center of the jack stand is threaded; At the top of the jack stand is a large nut that fits into a pocket to keep it from turning; The center bolt raises and lowers by turning the long bolt with the T-handle, either clockwise or counter-clockwise; Place under a section of sub frame close to the corners; We recommend using wood or concrete blocks under jacks
- PACKAGE CONTENTS: Package includes (2) RV leveling jacks to support a total of 12,000 pounds (5,443kg)
Bestseller No. 9 
Lippert 285325 24" Scissor Jack, black
- DURABLE CONSTRUCTION — Built tough with a black, powder-coated finish and rust-inhibitive surface that allows it to take on the wear and tear of RV travel
- ECONOMICAL SOLUTION — Inexpensive and extremely reliable, this scissor jack kit is a must-have if you’re replacing an old or broken stabilizer jack
- EXTENSION RANGE — The scissor jack extends up to a maximum of 24” and retracts to 4-1/4” for compact storage when not in use
- SECURE INSTALL — Our scissor jack kits come complete with all mounting hardware needed for bolt-on installation on your 5th wheel, travel trailer or cargo/utility trailer
- DEPENDABLE STRENGTH — This scissor jack is rated to support up to a 5,000 lb. load capacity per jack
Bestseller No. 10 
Set 4 Libra 24" 6000lbs RV Trailer Stabilizer Leveling Scissor Jacks w/Dual Power Drill sockets & mounting Hardware Set
- Stablizing and leveling your RV/Trailer, Remains steady on soft surfaces because of wide bow-tie base
- Includes 4 steel jacks and a 3/4" hex magnetic socket to raise/lower jack faster by power drill!
- Aslo include 16 pcs 3/8" mounting screws & matching 9/16" socket, a 11/36" mounting hole drill bit, one set of drilling guide sticker, everything you need for install!
- Extended height: 24", Retracted height: 4", retracted length: 26-1/2", width: 7.5"
- Capacity: 6,000 lbs per jack, bulit by same material as other brand's 7500lbs jacks!
Bestseller No. 11 
EAZ LIFT Telescopic RV Jack, Set of 2 | Adjusts from 16-inches to 30-inches | Featues a 6,000 lb. Load Capacity (48864)
- Adjustable: From 16-inches to 30-inches
- Load Capacity: 6000 lb.
- Features: A quick and easy pull pin that makes it easy to adjust the height of the jack
- Durable Construction: Constructed of durable steel
- Powder Coated: Provides maximum rust protection
Bestseller No. 12 
LIBRA 24" 6K lbs RV Trailer Camper Stabilizer Leveling Scissor Jacks w/Dual Power Drill sockets & mounting Hardware Set-Set 2
- StabIlizing and leveling your RV/Trailer, Remains steady on soft surfaces because of wide bow-tie base
- Includes 2 steel jacks, a 3/4" hex magnetic socket to raise/lower jack faster by power drill!
- Aslo include 8 pcs 3/8" mounting screws & matching 9/16" socket, a 11/36" mounting hole drill bit, one set of drilling guide sticker, everything you need for install!
- Extended height: 24", Retracted height: 4", retracted length: 26-1/2", width: 7.5"
- Capacity: 6k lbs per jack, bulit by same material as other brand's 7500lbs
Bestseller No. 13 
Lippert Components High Speed Power Stabilizer Jack Kit with Black Waterproof Switch Kit (298707)
- Includes waterproof switch, harness and reset breaker
- Legs extend up to 30”
- DIMENSIONS: 79” L x 6. 2” W x 19” H, 58 pounds
- POWERFULLY DESIGNED — No more cranking. With the PSX1, campers can stop wasting time and energy with manual cranks. A flip of a switch is all it takes to take the sway out of your RV or trailer.
- RUGGED VERSATILITY — We designed our stabilization system to automatically adjust to uneven, rugged terrain. Each leg operates independently, navigating the surface until safely secured in place.Linc remote compatible
Bestseller No. 14 
Dumble RV Stabilizer Jacks - 2pk 1300lb Cap Attachable Telescoping Travel Trailer Jack Stabilizer Stands and Jack Rod
- [Level Up Your Travel Game]: Ensure stability when loading and unloading with the Dumble RV Supplies Folding Trailer Stabilizer Jacks for Campers and more; Includes 2 flip down trailer legs and 1 handle
- [Optimal Weight Capacity]: Each RV jack stand provides a lift capacity up to 650 pounds (294.8kg) and a 1,000-pound (453.6kg) breaking point; Rear trailer stands work as sport utility trailer jacks, pop up camper stabilizer jacks, RV leveling jacks, food truck drop leg trailer supports, and boat trailer drop jacks
- [Expanding Height]: Telescoping stabilizer jacks can be adjusted from 12 to 18 inches (30.5 to 45.7cm) tall effortlessly by using the 11.7-inch (29.7cm) long steel jack rod handle
- [Built To Last]: Premium powder-coated steel trailer leveling jacks resist outdoor elements for long-lasting reliability; Trailer jack foot plate measures 3.4 by 3.9 inches (8.6 x 9.9cm) wide for stability
- [Folds Up for Safe Travels]: Mount to camper bumper, then pull down on leg to fold cargo trailer jack stands up and down; Spring mechanism and notches ensure a secure hold when driving; Swing down trailer stabilizer jacks will stand 4.1 inches (10.4cm) from mounted surface
Bestseller No. 15 
BAL 23225 Set of 2 "C" Jacks with Handle - 25"
- New, highly engineered, low-profile design yields a light weight, high strength, low cost product that is aesthetically pleasing and highly functional.
- High strength allows for stabilizing increased loads and fine leveling.
- Rapid extension provides quick activation of both up and down movements.
- Integrated foot makes for secure, increased ground contact to prevent slipping or sinking.
- Advanced, corrosion-resistant finish assures years of dependable use.
Last update on 2023-06-05 / Affiliate links / Images from Amazon Product Advertising API