Best Rated Car Amplifiers to Buy in 2022

Sometimes it might be quite difficult to find the best rated car amplifiers. With every niche market offering so many different products, it makes sense that this is the case.

Unfortunately, this very fact can make it incredibly difficult to find the item that best suits your needs, which is why we’ve put together this rated car amplifiers buying guide.

Our Favorites:

The 10 Best Rated Car Amplifiers Reviews:

Bestseller No. 1
Rockville RXA-T1 1500 Watt Peak/370w CEA Rated RMS 2 Channel Amplifier Car Stereo Amp
  • Rockville RXA-T1 1500 Watt Peak/750w RMS 2 Channel Car Stereo Amplifier. CEA Compliant Power Ratings:. 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x 370 Watts bridged @ 4 Ohms < 1% THD.
  • RMS Power Ratings. 750 Watts (2 x 375 Watts RMS) @ 2 ohms. 1 x 750 Watts @ 4 ohm Bridged Mono. 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. Peak Power: 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4 Ohms).
  • High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover. Low Pass Filter: 50Hz - 250Hz. High Pass Filter: 15Hz - 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry.
  • 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry. Status Mode LED Indicator.
  • High Level Input with Smart Auto Turn-On. Minimum THD at Rated Power: < 0.05%. Frequency Response: 10Hz - 40KHz. Damping Factor: > 200 @ 100Hz. 50 Amp Maxi Fuse. Dimensions: (W x H x L) 8.5? x 1.8? x 13?.
Bestseller No. 2
Pair Rockville RV5.3A 5.25" 3-Way Car Speakers 600 Watts/100 Watts RMS CEA Rated
  • Pair Rockville RV5.3A 5.25" 3-way car speakers. Peak Power Rating: 600 Watts per Pair / 300 Watts Each. CEA Compliant RMS Rating: 100 Watts per Pair / 50 Watts Each. Polypropylene woofer gives amazing bass and mids. Flex Motion Butyl Rubber Surround.
  • 1.2” PEI dome tweeter with ferrite magnet give amazing highs. 0.6” super tweeter. Steel high quality basket. Rubber magnet boot cover. Frequency response: 55-20,000 Hz. Sensitivity: 90 dB @ 1w/1m.
  • Impedance: 4 Ohm. Grilles included. Aluminum voice coils. 100% oxygen free copper voice coil windings. Cotton spider material. Copper terminals. Cutout diameter: 4.52”.
  • Magnet: 8 Oz Y25 magnet. Magnet dimensions: 80mm x 12mm. Fs: 117.456 hz. Re: 3.6 OHM. Qes: 2.561. Qts: 1.681. Qms: 4.888. Fits 5.25” and 5” openings.
  • Top mounting depth: 1.89” 95% of installs use the top mounting depth). Bottom mounting depth: 2.1” (This measures the speaker from top to bottom).
SaleBestseller No. 3
Rockville RVA-M3 4000w Peak/1000w CEA RMS @ 1 Ohm Amplifier Mono Car Amp+Remote
  • Features: Rockville RVA-M3 4000w Peak/1000w CEA RMS @ 1 Ohm Mono Car Amplifier, Metal Bass Remote Included, 1 Ohm: 1000 Watts RMS CEA Compliant (<1% THD @ 14.4 Volts) (74.1% efficient), 2 Ohm: 600 Watts RMS CEA Compliant (<1% THD @ 14.4 Volts) (84.5% effic
  • Peak: 4000 Watts @ 1 Ohm (Only use this power as reference if matching with amps that do not have an RMS rating), High-Speed MOSFET Power Supply, Class D Technology, Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
  • Phase Control Switch, Full IC-Controlled Protection Circuitry, Adjustable 0-18dB Bass Equalizer, Mute and Delay Soft Start System, Status Mode LED Indicator, Minimum THD at Rated Power: <0.1%
  • S/N Ratio: >90dB, Under Voltage Protection at 9V, Over Voltage Protection at 16V, Radiation cooling keeps the amp running at high volumes for hours straight, Extruded aluminum heatsink, Frequency Response: 10Hz - 300Hz
  • Damping Factor: >150 @ 100Hz, Fuse: 40A*3, Technology: This series uses a reliable Class D circuitry that gives you the most reliability and the most power for your money, Dimensions: (L x W x H) 14" x 8.5" x 2.24", Weight:7.8 lbs
Bestseller No. 4
Rockville RXD-T2 Micro Car Audio Class D Amplifier 2400w 2 Chan 2x600W CEA Rated
  • Rockville RXD-T2 Micro Class D Car Amplifier 2400 Watt 2 Channel 2x400W CEA Rated
  • Full-Range Class D Amplifier Architecture
  • CEA Compliant Power Ratings:
  • 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N
  • 1200 Watts (2 x 600 Watts) at 2 ohms < 1% THD
Bestseller No. 5
Rockville dB55 4000 Watt/1000w CEA RMS 5 Channel Amplifier Car Stereo Amp, Loud!
  • Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.
  • Rockville dB55 4000 Watt/2000 Watt RMS 5 Channel Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 120 Watts x 4 + 500 Watts x 1 <1% THD+N. 4 Ohm: 80 Watts x 4 + 300 Watts x 1 <1% THD+N.
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc). 2 Ohm 240 Watts x 4 + 1000 Watts x 1. 4 Ohm: 160 Watts x 4 + 600 Watts x 1. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm 480 Watts x 4 + 2000 Watts x 1. 4 Ohm: 320 Watts x 4 + 1200 Watts x 1.
  • High-Speed MOSFET Power Supply. Rugged switching MOSFETs for Class D in CH5. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Optical Coupler Class “AB” +“D” Technology. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: (CH1-CH4)40Hz –4KHz /(CH5)50Hz –250Hz. High Pass Filter: 15Hz – 4KHz. Subsonic Filter: 15Hz - 55Hz.
  • Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: < 0.05%. S / N Ratio: >90dB. Frequency Response: 15-35KHz. Damping Factor: >[email protected] 100Hz. 40 Amp x3. Dimensions: (W x H x L) 9'' x 2.4' x 18.6".
Bestseller No. 6
Rockville dB10 800w Peak Mono Car Audio Amplifier 200w RMS @ 4 Ohms
  • Features: Rockville dB10 800 Watt/200 Watt Dyno-Certified RMS Mono Class-D 4-Ohm Amplifier.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 4 Ohm: 200 Watts x 1 Channel.
  • Peak: (Use these ratings when comparing with great brands such as Boss, Power Acoustik, etc). 4 Ohm: 800 Watts x 1 Channel. High-Speed MOSFET Power Supply. Minimum THD at Rated Power: <0.1%. S / N Ratio: >90dB. Under Voltage Protection: 10V. Over Voltage Protection: 16V.
  • Frequency Response: 15 Hz - 250 Hz. Damping Factor: >60 @ 100Hz. Optical Coupler Class “D” Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50 Hz - 250 Hz. Subsonic Filter: 15 Hz - 55 Hz. Phase Control. Full IC-Controlled Protection Circuitry.
  • Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. Status Mode LED Indicator. 25 Amp ATO Fuse. Product Dimensions: (L x W x H) 7.7" x 5.5" x 2.0". Product Weight: 4.4 Lbs.
Bestseller No. 7
200W Bluetooth 5.0 Power Amplifier 2 Channel Hi-Fi Stereo Audio Amp Home Desktop Car Speaker DC8-24V
  • With Bluetooth 5.0 and 3.5mm AUX audio input, achieving more stable and faster transmission. Compatible with most common audio device such as iPod, Phone, MP3, computer, TV, CD players, or Streaming Media players and so on.
  • Adopting 2PCS classical TPA3116D2 chip with AM interference suppression function, max output power can reach 100W*2, easily to drive most home desktop/bookshelf/floor-standing speakers.
  • Adding filter and red ring inductance, the sound is clear, sweet, mellow and full, no pop sound when skipping or pausing songs, and no audible noise even at high power output.
  • Mini size and higher playability, easy to assemble and install. With protective case, reverse connection / over-voltage / under-voltage and over-heat / short-circuit protection. Its wide working voltage DC 5-27V make it easy to used at home or in the car.
  • Very easy and convenient to use. We include the tool you may need to install it. This board only adopts short prompt tone instead of annoying voice prompt.
Bestseller No. 8
Infinity Primus 9004A 4 Channel High Power Class A/B Car Amplifier (RMS: 90 4 @4ohms 110 4 @ 2ohms)
  • Operating voltage 9 – 16V RMS power @ 4 ohms 90WRMS power @ 2 ohms 110W RMS bridged power @ 4 ohms 220W Total peak power 880W
  • Frequency response 20Hz – 20kHz @ -1dB THD + N at rated power (20Hz – 20kHz)<1% Line-in signal-to-noise ratio (reference to 1 watt)>75dB
  • Maximum high input signal level 12V High input maximum sensitivity 0.5V Maximum line input signal level 5V Line input maximum sensitivity 0.2V
  • Quiescent current draw<1.5A Fuse size 2 x 20A Dimensions (H x W x L) 2.02 x 5.8 x 10.74 inches
Bestseller No. 9
Rockville dB13 3000 Watt Peak/750w CEA Rated RMS Mono 2 Ohm Amplifier+Amp Kit
  • Package Includes: (1) Rockville dB13 3000 Watt Peak/750w Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp, (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit w/RCA's
  • Features of dB13: Rockville dB13 3000 Watt Peak/750w Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp, Dyno Certified RMS Power Ratings: - 2 Ohm: 750 Watts x 1 Channel <1% THD+N, - 4 Ohm: 450 Watts x 1 Channel <1% THD+N, Peak: - 2 Ohm: 3000 Watts x 1 Channel, - 4 Ohm: 1800 Watts x 1 Channel, High-Speed MOSFET Power Supply, Optical Coupler Class “D” Technology,
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry, Low Pass Filter: 50Hz - 250Hz, Subsonic Filter: 15Hz - 55Hz, Phase Control Switch, Full IC-Controlled Protection Circuitry, Remote Dashboard Subwoofer Control, Fully Adjustable 12dB Bass Equalizer, Mute and Delay Soft Start System, RCA Preamp Line Output,
  • 8 Volt Preamp Circuitry, Status Mode LED Indicator, Minimum THD at Rated Power: <0.1%, S / N Ratio: >90dB, Under Voltage Protection at 10V, Over Voltage Protection at 16V, Frequency Response: 15Hz - 250Hz, Damping Factor: >150 @ 100Hz, 80 Amp Maxi Fuse, Dimensions: (W x H x L) 9" x 2.4" x 14.7"
  • Features of RWK41: 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable, 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables, 17’ – 18 Gauge Blue Remote Cable, 17’ – 16 Gauge Clear Speaker Wire, 3’ – 4 Gauge Clear SuperFlex Ground Wire, Gold Plated AGU Heat Resistant Fuse Holder, 60 Amp AGU Gold Plated Fuse, 7’ Split Tube Loom, Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spade s, and Grommets
Bestseller No. 10
boss - mr800 - boss mr800 800w 2 ch marine rated amplifier amp 2 channel 800 watt
  • Boss Mr800 800w 2 Ch Marine Rated Amplifier Amp 2 Channel 800 Watt

Last update on 2022-11-30 / Affiliate links / Images from Amazon Product Advertising API

How to find the best rated car amplifiers?

Here, we’ll be going over a number of factors that you can use to ensure that you’re purchasing the best rated car amplifiers for you.

Regardless of which type of item you’re looking to buy, chances are that there are existing buying guides on the internet, all of which aim to give you good rated car amplifiers recommendations.

Despite these recommendations, however, it’s always a good idea to do your own research. In addition to this research, asking yourself the following questions is also super helpful:

  • What features does the rated car amplifiers need to have to be perfect for my needs?
  • What is my budget?
  • Do I need to purchase a certain brand?

Once you’ve answered these questions and have a good idea of what you’re looking for and the buying process becomes much easier. Keep in mind that when looking for the best product, there’s no need to rush. In fact, very rarely are the ideal products found by choosing the first one you see or by basing your decisions on only one factor. Take your time and enjoy the process!

Now, with the answers to the previous questions in mind, we urge you to use our upcoming buying guide for rated car amplifiers to find what you’re looking for:

Brand

In some cases, the brand of rated car amplifiers is very important. For example, if you’re looking for an item that works in tandem with another, you might very well need both products to be the same brand. If this is the case, it’s vital to pay attention to this factor, as choosing the wrong product can mean the difference between wasting your money and buying a great product that functions as it should.

Features

The features in any given rated car amplifiers are important because they can dictate which version of an item you need and how much money you need to spend. Consider all the key features that you want your item to have and don’t settle for anything that doesn’t check at least ¾ of your boxes.

Reviews

Customer reviews about rated car amplifiers are crucial – especially when you’re buying a product that costs a lot of money or serves a big importance. Luckily, most products can be found online, which means that it’s common for there to be scores of customer reviews from those who have already purchased any given product.

Pay attention to these reviews. Take note of the pros and cons that they mention, and factor these into your big decision. In some cases, you’ll be forced to sacrifice one con in order to gain a particular pro, but being aware of the potential con is going to be beneficial in either case.

Quality

Of course, quality is key. You don’t want to purchase a low-quality product. If you do, you run the risk of your item breaking, not working properly, or otherwise proving to be very disappointing, as well as a waste of money.

You can compare rated car amplifiers quality by researching what your potential purchases are made from, contrasting the individual items against each other to discern which one is made of the best materials.

Warranty

Warranty isn’t always going to be important, but it definitely can be. This is especially true if the item in question is tech-related or expensive. A good warranty will be valid for an extended time after purchase and cover a variety of problems ranging from item defects to random accidents, water damage, and other miscellaneous events that could ruin your product.

Conclusion

The quest to find the best rated car amplifiers can be daunting – but it doesn’t have to be. It can be made much easier by asking yourself a few simple questions and then thinking critically about the items you want to buy. Consider their features, quality, brand, warranty, and customer reviews and you’re more likely to make a great purchase.