Best Plasma Cutter With Built In Compressor to Buy Right Now (2022)

Sometimes it might be quite difficult to find the best plasma cutter with built in compressor. With every niche market offering so many different products, it makes sense that this is the case.

Unfortunately, this very fact can make it incredibly difficult to find the item that best suits your needs, which is why we’ve put together this plasma cutter with built in compressor buying guide.

Our Best Picks:

10 Best Plasma Cutter With Built In Compressor Reviews:

Bestseller No. 1
HITBOX 40 Amp Plasma Cutter with Built-In Air Compressor 220V Digital Inverter IGBT Clean Cut Plasma Cutting Machine HBC8000PRO
  • BUILT IN AIR COMPRESSOR PLASMA CUTTER: Adopting the most advanced switch power inverter technique. Cut many metals up to 1/2" thick with the 40A plasma cutting function
  • READY TO CUT PLASMA CUTTER - HITBOX HBC8000PRO Non-Touch plasma cutter equipped with built-in air compressor, do not need to install air compressor regulator. You literally just need your plasma cutter and a power source to start cutting. This makes doing jobs out in the field incredibly easy
  • AIR SWITCH PROVIDES COMPREHENSIVE PROETCTION - Most of plasma cutters are equipped with rocker switch which can withstand lower current and does not have leakage protection. Our plasma cutter came with high-power air switch which can withstand higher current and power off automatically when short-circuit or leakage to protect you, machine and your power system
  • Wide Application: Cuts stainless steel, alloy steel, mild steel, copper, aluminum, and other metal materials with ease, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.Suit for installation engineering, construction processing, auto repair, advertising processing
  • 1 YEAR WARRANTY 1pcs Plasma cutter,1pcs PT31 Cutting Torch,1pcs Earth clamp with cable,HITBOX portable welder offers a good warranty. Our 24 hours online customer service will help you fix it. Just buy HITBOX machines with confidence
SaleBestseller No. 2
Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V , Brown
  • Built in Air Compressor
  • Cuts faster than oxy fuel
  • Smaller heat-affected zone for less warping
  • No gas pressure settings for flame tuning needed
  • More precise cut, thinner kerf, less slag to clean up
Bestseller No. 3
WARCKING Plasma Cutter CUT50K Contact pilot arc air plasma cutting machine,With Built In Compressor DC Inverter 220V 45A IGBT Plasma Cutting Equipment
  • Lower your usage cost:The air compressor is integrated into the machine to avoid the trouble of carrying an additional air compressor.Of course it also supports external air source.use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • Contact pilot arc: This plasma cutter effectively cuts rough, painted and rusted surfaces with minimal slag.
  • Output Data:15-45 A DC output, 0.3" ideal clean cut and 0.6” maximum severance cut under 220V.
  • Safety Protection: Built in over current protection, over load protection, temperature control.the cutting works in a more safer and professional way.
  • Quality Assurance:We Adopt high standard are manufacturing process and quality management system. provide a one 1 year warranty,if you have any questions, please contact us for support, to ensure that you are carefree.
Bestseller No. 4
HZXVOGEN 40 Amp Plasma Cutter with Built-In Air Compressor 220V Contact Pilot ARC Air Plasma Cutting Machine Digital Display DC Inverter IGBT Clean Cutting Machine Equipment HBC6000Pro
  • READY TO CUT PLASMA CUTTER - HZXVOGEN HBC6000Pro plasma cutter equipped with built-in air compressor, do not need to install air compressor regulator. You literally just need your plasma cutter and a power source to start cutting. This makes doing jobs out in the field incredibly easy
  • PERFECT CLEAN FINISH, SAVE TIME AND MATERIAL - Output Data:15-40A DC output, 0.3" (6-8mm) ideal clean cut and 0.6” (12-15mm) maximum severance cut under 220V. HBC6000Pro plasma cutter have plasma cutter have gas delay function, it will bring even cuts, little deformation and little slag. Do not need to grind too much after cutting
  • TWO EXTERNAL AIR FILTERS, LONGER SERVICES TIIME - The two air filters of HBC6000Pro plasma cutter are to make the compressor air clean, keep dust outside the machine, and reduce noise. Most of the plasma cutter equipped air filter inside the machine, but ours are external, which protect electronic components being damaged by high temperature
  • AIR SWITCH PROVIDES COMPREHENSIVE PROETCTION - Most of plasma cutters are equipped with rocker switch which can withstand lower current and does not have leakage protection. Our plasma cutter came with high-power air switch which can withstand higher current and power off automatically when short-circuit or leakage to protect you, machine and your power system
  • BUY WITH CONFIDENCE - HZXVOGEN offers good after-sales service. If the machine can not work or have other problem when working, please contact us at the first time. We have agent in the United States and our 24 x 7 friendly customer support team is always ready to help
Bestseller No. 5
HITBOX 2-in-1 50 Amp Plasma Cutter with Built-In Air Compressor Non-Touch + 220V MMA Welder Digital Inverter IGBT Clean Cut Cutting Machine
  • MULTIPURPOSE WELDER AND CUTTER: Adopting the most advanced switch power inverter technique. Cut many metals up to 1/2" thick with the 50A plasma cutting function. Use the 200A stick welder for variety of metals. Features an 50Hz/60Hz input power frequency and 80% power efficiency
  • READY TO CUT PLASMA CUTTER - HITBOX CT55 Non-Touch plasma cutter equipped with built-in air compressor, do not need to install air compressor regulator. You literally just need your plasma cutter and a power source to start cutting. This makes doing jobs out in the field incredibly easy
  • AIR SWITCH PROVIDES COMPREHENSIVE PROETCTION - Most of plasma cutters are equipped with rocker switch which can withstand lower current and does not have leakage protection. Our plasma cutter came with high-power air switch which can withstand higher current and power off automatically when short-circuit or leakage to protect you, machine and your power system
  • Wide Application: Cuts stainless steel, alloy steel, mild steel, copper, aluminum, and other metal materials with ease, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.Suit for installation engineering, construction processing, auto repair, advertising processing
  • 1 YEAR WARRANTY 1pcs 2in1 Plasma cutter,1pcs S45 Cutting Torch,1pcs Electrode Holder with cable,1pcs Earth clamp with cable,1pcs Gas Tube,2pcs hose clamps,1pcs welding brush/ hammer combo. HITBOX portable welder offers a good warranty. Our 24 hours online customer service will help you fix it. Just buy HITBOX machines with confidence
Bestseller No. 6
Hobart AirForce 12ci Plasma Cutter with Built-In Air Compressor
  • Lightweight, powerful inverter design
  • New XT12R torch is more efficient and comfortable with an ergonomic handle and cables that are extra flexible
  • Built-in piston-driven air compressor
  • Cuts mild steel up to 1/8in. @ 10in. per minute; 1/4in. mild steel @ 3in. per minute
  • Also cuts stainless steel, aluminum, brass and copper
Bestseller No. 7
Hypertherm 088096 Powermax 30 AIR Hand System with 15' Lead
  • Operate it anywhere with the internal air compressor
  • Plug into any 120 or 240 V power with Auto-Voltage technology and included plug adapters
  • Highly portable. The smallest, lightest weight system in its class
  • New AIR T30 torch is rugged and designed to withstand the toughest environments
  • Do more in less time. Fast cutting speeds and superior cut quality result in less secondary operations
SaleBestseller No. 8
YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Power Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved
  • Non-Touch Pilot Arc: Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • Built-in Post Flow:When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.
  • Powerful Cutting Ability:10-55 A DC output, 1/2”ideal clean cut and 3/4”maximum severance cut under 220/240V,60% Duty Cycle. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • Lightweight and Portable:Allows for connection to 110- or 220-volt receptacles without tools,Portable in the shop or at the job site—at 13 lb the shoulder strap allows the end user to easily move from location to location
  • Added Safety:Certificated by ETL,Automatic compensation for voltage fluctuation, over current protection, over load protection,temperature control
Bestseller No. 9
Plasma Cutter, CUT50 50 Amp 110V/220V Dual Voltage AC DC IGBT Cutting Machine with LCD Display
  • 【High Quality】Cut-50 50AMP Plasma Cutter Is Made Of High Quality Components, By Adopting The Most Advanced Inverter Technical Of Switch Power, As Well As The Product Life And Work Efficiency Are Increased By 30% Than Ordinary Machines, Smooth Cutting Surface,Permanent Supply Of High Quality Consumables
  • 【Portable Design】 Compact Plasma Cutting Machine With LCD Digital Display And Equipped With A Portable Handle,It Is Very Convenient To Operate And Carry.Long Term Supply Of Consumables.
  • 【Dual Voltage】This Plasma Cutter Can Automatically Adapt To Switch Input Power Of 90V-260V(110V-220V), Plug And Play In Different Environments, No External Conversion Plug Required
  • 【Application】 This is a Professional Plasma Cutter, Which Is Widely Used For Cutting Stainless Steel, Alloy Steel, Mild Steel, Copper And Other Color Metal Materials, Cutting Thickness Is 1-20mm.QA Has Video Operation Instructions
SaleBestseller No. 10
Lotos Technology LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown
  • ★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: Efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • ★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • ★ 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min.
  • ★ 𝐎𝐮𝐭𝐩𝐮𝐭 & 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: 10-50A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • ★ 𝐁𝐮𝐲 𝐰𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞: We offer a 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞, 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 𝐚𝐧𝐝 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲, please submit warranty registration form on our website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 customer service(via phone/email) is available to assist you.

Last update on 2022-12-04 / Affiliate links / Images from Amazon Product Advertising API

How to find the best plasma cutter with built in compressor?

Here, we’ll be going over a number of factors that you can use to ensure that you’re purchasing the best plasma cutter with built in compressor for you.

Regardless of which type of item you’re looking to buy, chances are that there are existing buying guides on the internet, all of which aim to give you good plasma cutter with built in compressor recommendations.

Despite these recommendations, however, it’s always a good idea to do your own research. In addition to this research, asking yourself the following questions is also super helpful:

  • What features does the plasma cutter with built in compressor need to have to be perfect for my needs?
  • What is my budget?
  • Do I need to purchase a certain brand?

Once you’ve answered these questions and have a good idea of what you’re looking for and the buying process becomes much easier. Keep in mind that when looking for the best product, there’s no need to rush. In fact, very rarely are the ideal products found by choosing the first one you see or by basing your decisions on only one factor. Take your time and enjoy the process!

Now, with the answers to the previous questions in mind, we urge you to use our upcoming buying guide for plasma cutter with built in compressor to find what you’re looking for:

Brand

In some cases, the brand of plasma cutter with built in compressor is very important. For example, if you’re looking for an item that works in tandem with another, you might very well need both products to be the same brand. If this is the case, it’s vital to pay attention to this factor, as choosing the wrong product can mean the difference between wasting your money and buying a great product that functions as it should.

Features

The features in any given plasma cutter with built in compressor are important because they can dictate which version of an item you need and how much money you need to spend. Consider all the key features that you want your item to have and don’t settle for anything that doesn’t check at least ¾ of your boxes.

Reviews

Customer reviews about plasma cutter with built in compressor are crucial – especially when you’re buying a product that costs a lot of money or serves a big importance. Luckily, most products can be found online, which means that it’s common for there to be scores of customer reviews from those who have already purchased any given product.

Pay attention to these reviews. Take note of the pros and cons that they mention, and factor these into your big decision. In some cases, you’ll be forced to sacrifice one con in order to gain a particular pro, but being aware of the potential con is going to be beneficial in either case.

Quality

Of course, quality is key. You don’t want to purchase a low-quality product. If you do, you run the risk of your item breaking, not working properly, or otherwise proving to be very disappointing, as well as a waste of money.

You can compare plasma cutter with built in compressor quality by researching what your potential purchases are made from, contrasting the individual items against each other to discern which one is made of the best materials.

Warranty

Warranty isn’t always going to be important, but it definitely can be. This is especially true if the item in question is tech-related or expensive. A good warranty will be valid for an extended time after purchase and cover a variety of problems ranging from item defects to random accidents, water damage, and other miscellaneous events that could ruin your product.

Conclusion

The quest to find the best plasma cutter with built in compressor can be daunting – but it doesn’t have to be. It can be made much easier by asking yourself a few simple questions and then thinking critically about the items you want to buy. Consider their features, quality, brand, warranty, and customer reviews and you’re more likely to make a great purchase.