Best Muffler For 350 Chevy to Buy in 2023

Sometimes it might be quite difficult to find the best muffler for 350 chevy. With every niche market offering so many different products, it makes sense that this is the case.

Unfortunately, this very fact can make it incredibly difficult to find the item that best suits your needs, which is why we’ve put together this muffler for 350 chevy buying guide.

Our 20 Favorites:

#PreviewProduct
1 Thrush 17633 Hush Muffler Thrush 17633 Hush Muffler
2 Walker Exhaust Quiet-Flow SS 21690 Direct Fit Exhaust Muffler Walker Exhaust Quiet-Flow SS 21690 Direct Fit Exhaust Muffler
3 Floshine Universal Mufflers,Dual Chamber 3 inch inlet/3 inch outlet,Performance Automotive Muffler Exhaust FH43040 Floshine Universal Mufflers,Dual Chamber 3 inch inlet/3 inch outlet,Performance Automotive Muffler...
4 Borla 400844 Sbc Hot 350 383 Borla 400844 Sbc Hot 350 383
5 AP Exhaust Products AP Exhaust 87522CB Exhaust Pipe, Red AP Exhaust Products AP Exhaust 87522CB Exhaust Pipe, Red
6 Dorman 03147 Front Exhaust Stud Kit 3/8-16 x 2-1/2 In. and 3/8-16 x 3-1/4 In. Compatible with Select Models Dorman 03147 Front Exhaust Stud Kit 3/8-16 x 2-1/2 In. and 3/8-16 x 3-1/4 In. Compatible with Select...
7 Pair of Single Chamber Performance Race Muffler 2.5' Center / Center Universal Muffler (2.5 Inch) Pair of Single Chamber Performance Race Muffler 2.5" Center / Center Universal Muffler (2.5 Inch)
8 FEL-PRO 60083 Exhaust Pipe Gasket FEL-PRO 60083 Exhaust Pipe Gasket
9 Smoothie Rams Horn Exhaust Manifolds, Small Block Fits Chevy, Raw Smoothie Rams Horn Exhaust Manifolds, Small Block Fits Chevy, Raw
10 Walker Exhaust 40295 Exhaust Y Pipe Walker Exhaust 40295 Exhaust Y Pipe
11 Flowmaster 72198 Exhaust Muffler, 1 Pack, Brushed Flowmaster 72198 Exhaust Muffler, 1 Pack, Brushed
12 Floshine Universal Mufflers,Single Chamber 3 inch inlet/3 inch outlet,Performance Automotive Exhaust Muffler FH430109 Floshine Universal Mufflers,Single Chamber 3 inch inlet/3 inch outlet,Performance Automotive Exhaust...
13 MR HELLO SBC Power Steering Pump Bracket Billet Slotted Adjustable LWP Compatible With 350 Small Block Chevy MR HELLO SBC Power Steering Pump Bracket Billet Slotted Adjustable LWP Compatible With 350 Small...
14 NORSMIC Exhaust Hanger Rubber with Stainless Steel Inside, Universal Hole Size Diameter 12mm (0.47inch), Muffler Bracket Mount, High Density Rubber Isolator Insulator NORSMIC Exhaust Hanger Rubber with Stainless Steel Inside, Universal Hole Size Diameter 12mm...
15 Walker Exhaust Quiet-Flow SS 21054 Direct Fit Exhaust Muffler Walker Exhaust Quiet-Flow SS 21054 Direct Fit Exhaust Muffler
16 TAKPART 2PCS Exhaust Gaskets Replacement Square Port Copper Header Exhaust Gaskets Reusable Compatible for SB Chevy 327 305 350 383 TAKPART 2PCS Exhaust Gaskets Replacement Square Port Copper Header Exhaust Gaskets Reusable...
17 Miytsya Four Seasons Universal Armrest Box Mat, Fiber Leather Embossing, Waterproof Armrest Cover Center Console Mat, Car Armrest Seat Cover (Red) Miytsya Four Seasons Universal Armrest Box Mat, Fiber Leather Embossing, Waterproof Armrest Cover...
18 Thrush 17715 Turbo Muffler Thrush 17715 Turbo Muffler
19 Dynomax Super Turbo 17733 Exhaust Muffler Dynomax Super Turbo 17733 Exhaust Muffler
20 Acouto 2.5 Inch Header Collector Gaskets 2pcs Copper Header Exhaust Collector Gaskets 2 1/2' Exhaust Gaskets Durable Reusable for SBC BBC 302 350 454 3 Bolt Acouto 2.5 Inch Header Collector Gaskets 2pcs Copper Header Exhaust Collector Gaskets 2 1/2" Exhaust...

Our Favorite Muffler For 350 Chevy Reviews:

Bestseller No. 1
Thrush 17633 Hush Muffler
  • VINTAGE SOUND -- Tri-flow design delivers that perfect hot rod and muscle car sound
  • PREMIUM ACOUSTIC CONTROL -- Fiberglass matting absorbs unwanted interior resonance
  • ENGINEERED TO LAST -- 100% aluminized-coated shell and spun lock heads for long life
  • SLEEK FINISH -- Silver finish features embossed Thrush logo
  • FLEXIBLE SOLUTION -- Customizable design offered in a variety of styles and sizes for universal fitment (may require specialized fabrication and/or welding)
SaleBestseller No. 2
Walker Exhaust Quiet-Flow SS 21690 Direct Fit Exhaust Muffler
  • CORROSION RESISTANT STAINLESS STEEL -- The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
  • EASY TO INSTALL -- Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn't require specialized fabrication and/or welding
  • BUILT TO LAST -- Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL -- OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED -- Acoustic and flow tested for quality OE-style sound you can count on
Bestseller No. 3
Floshine Universal Mufflers,Dual Chamber 3 inch inlet/3 inch outlet,Performance Automotive Muffler Exhaust FH43040
  • Aluminium construction --Aluminized steel construction and internal drainage system for maximum durability,Internal partitions with the change of temperature, the deformation is reduced by thermal expansion and cold contraction
  • Noise reduction performance--Factory-style using aerodynamics sound absorbs unwanted interior resonance to reduce radiated noise,OE-style domed heads Make the noise lower
  • High-quality-- Internal partition wall and high quality material make it have the characteristics of high temperature resistance,Factory-style Welded structure provide stability and longer service life
  • Muffler size--3'' muffler| Body Length: 13"| Overall Length: 19"| Body Height: 4" | Body Width: 9.5" |
  • Universal automotive replacement exhaust muffler-Floshine 40 series 3 inch muffler are suitable for most vehicles, including trucks, off-road vehicles and pickups, and can even be used on generators to reduce noise. They can be installed with Floshine clamps or welded to connect the exhaust pipe to the 3 inch exhaust muffler
Bestseller No. 4
Borla 400844 Sbc Hot 350 383
  • The package length is 2.387 centimeters
  • The package height is 19.177 centimeters
  • The package width is 10.795 centimeters
  • Package Weight : 6.305 kilograms
SaleBestseller No. 5
AP Exhaust Products AP Exhaust 87522CB Exhaust Pipe, Red
  • Country Of Origin : United States
  • Package Weight : 3.35 Lbs
  • Package Quantity : 1
  • Product Type : Auto Part
SaleBestseller No. 6
Dorman 03147 Front Exhaust Stud Kit 3/8-16 x 2-1/2 In. and 3/8-16 x 3-1/4 In. Compatible with Select Models
  • Direct replacement - this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
  • Ideal solution - this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
  • Durable construction - these parts are made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
Bestseller No. 7
Pair of Single Chamber Performance Race Muffler 2.5" Center / Center Universal Muffler (2.5 Inch)
  • ▲ Pair of Single Chamber Performance Race Muffler.
  • ▲ 7" Muffler Body Length, 12" Overall Length, 2.5" Muffler Inlet And Outlet Diameter, Body Type: 4" x 9" Oval
  • ▲ Universal single chamber Race street Muffler 2.50" Center In / 2.50" Center Out. CHECK PRODUCT DETAILS CHART BELOW FOR OTHER SIZES.
  • ▲ Aggressive Deep Sound.
  • ▲ Thanks for your encouraging review and feedback! It really increases our service level and passion of work! Incase you meet problem with our products, please contact us first before you give feedback and review. We will assure you will get the best solution and service.
Bestseller No. 8
FEL-PRO 60083 Exhaust Pipe Gasket
  • Meets or exceeds all original equipment specifications
  • Application-specific design ensures a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
Bestseller No. 9
Smoothie Rams Horn Exhaust Manifolds, Small Block Fits Chevy, Raw
  • Classic Ram Horn style in a smooth cleaned up version for a vintage look
  • Features Corvette sized 2-1/2" outlet for added flow and performance
  • Work well for both straight and angle plug heads
  • Excellent alternative to leak prone headers
  • Hardware and gaskets are included to make this a simple installation
SaleBestseller No. 10
Walker Exhaust 40295 Exhaust Y Pipe
  • RESISTS CORROSION -- Durable aluminized steel construction for corrosion resistance and performance.Material:Alloy Steel
  • EASY TO INSTALL -- Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE -- Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER -- Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) - Outlet Diameter (O.D.) connection; see product specifications for more information
Bestseller No. 12
Floshine Universal Mufflers,Single Chamber 3 inch inlet/3 inch outlet,Performance Automotive Exhaust Muffler FH430109
  • Aluminium construction --Aluminized steel construction and internal drainage system for maximum durability,Internal partitions with the change of temperature, the deformation is reduced by thermal expansion and cold contraction
  • Noise reduction performance--This 3 inch quiet mufflerFactory-style using aerodynamics sound absorbs unwanted interior resonance to reduce radiated noise,OE-style domed heads Make the noise lower
  • High-quality-- Internal partition wall and high quality material make it have the characteristics of high temperature resistance,Factory-style Welded structure provide stability and longer service life
  • Performance 3''Muffler size--3''inlet 3''outlet| Body Length: 7"| Overall Length: 12.5"| Body Height: 4" | Body Width: 9.5" | Inlet: 3" ID
  • Adaptability-The universal 3 inch muffler exhaust is fit on most vehicles, and only requires clamps or welding for installation.
Bestseller No. 13
MR HELLO SBC Power Steering Pump Bracket Billet Slotted Adjustable LWP Compatible With 350 Small Block Chevy
  • SBC Power Steering Pump Bracket Made of Aerospace Grade Billet Aluminum
  • Fit for 19319932 or 19319961 Style SBC Engines Power Steering Bracket
  • Just Compatible with Long Water Pump and V-belt Pulleys
  • This Power pump bracket Work For 1 and 2 rib V-belt pulleys
  • Using A Slotted Arm To Maintain Belt Tension, Mounts Your Power Steering Pump Low On The Driver Side Of Your Engine
Bestseller No. 14
NORSMIC Exhaust Hanger Rubber with Stainless Steel Inside, Universal Hole Size Diameter 12mm (0.47inch), Muffler Bracket Mount, High Density Rubber Isolator Insulator
  • ⭐[Essential for Exhaust System]: A 20mm-wide and 2mm-thick stainless steel skeleton ring is built inside this rubber exhaust hanger. This exhaust rubber hanger is essential to suspend the exhaust pipe from the chassis, while absorbing vibrations so the exhaust system is quiet and does not rattle. It holds the exhaust pipe safely above the ground. No more clanging or scraping sound when your car goes over a bump or reaches the bottom of the hill.
  • ⭐[Universal Fitment]: This rubber exhaust hanger fits most cars which use a readily-replaceable hanger system that consists of two pegs and a rubber bushing insulator mount. Be sure to check the size of the pegs and the distance between two pegs of your vehicle, and make sure this rubber hanger fits.
  • ⭐[Detailed Dimensions]: Refer to Pic.4 and Pic.5 for detailed dimensions of the exhaust pipe rubber hanger. Overall Width: 112mm (4.4 inch); Overall Height: 46mm (1.8 inch); Depth: 40mm (1.6 inch) Hole diameter: 12mm (0.47 inch). It's a universal automotive tool for the exhaust system of your car, truck, jeep and SUV.
  • ⭐[Durably High-Density Rubber]: Norsmic exhaust pipe insulator hanger is made of premium high-density rubber. It’s high temperature resistant and made to last longer. It's a standard auto part replacement for your exhaust system.
  • ⭐[3 Quick Steps to Install]: 🧰 Step 1, Remove the worn-out muffler hanger from the exhaust system with a exhaust hanger removal tool or just a cutter. 🧰 Step 2, Hang this new exhaust hanger on the mount peg attached to the chassis. 🧰 Step 3, Hook the other end of this new exhaust hanger around the mount peg on the exhaust pipe. Tips: Using some lubrication helps to install this tool hanger easily.
SaleBestseller No. 15
Walker Exhaust Quiet-Flow SS 21054 Direct Fit Exhaust Muffler
  • CORROSION RESISTANT STAINLESS STEEL -- The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
  • EASY TO INSTALL -- Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn't require specialized fabrication and/or welding
  • BUILT TO LAST -- Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL -- OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED -- Acoustic and flow tested for quality OE-style sound you can count on, Inlet Diameter (inch): 3 inch, Outlet Diameter (inch): 3 inch
Bestseller No. 16
TAKPART 2PCS Exhaust Gaskets Replacement Square Port Copper Header Exhaust Gaskets Reusable Compatible for SB Chevy 327 305 350 383
  • This exhaust gasket is made of high-quality solid copper material.
  • This exhaust gasket set is flexible and reusable.
  • Fitment: our copper header exhaust gaskets can fit SB Chevy 327 305 350 383
  • Please feel free to contact seller if you have any questions of our products.
SaleBestseller No. 17
Miytsya Four Seasons Universal Armrest Box Mat, Fiber Leather Embossing, Waterproof Armrest Cover Center Console Mat, Car Armrest Seat Cover (Red)
  • Size Detail: The size of this center console armrest box pad is: 12.6in*7.48in, it is not suitable for the center console armrest box of all models, please measure the size of your armrest box carefully before purchasing, Avoid the wrong size.
  • Premium Material: The center console armrest box pad is made of premium skin-feeling PU leather, which is thick enough to protect your car from pet claws, dirt and sticky fingers.
  • Unique Design: Perfect fiber leather double-line embossing series, easy to run, the bottom silicone anti-slip design, add a fashion sense to your car.
  • Easy to Install: No tools are required for installation, just place it on the armrest box, and use the two non-slip elastic buckles at the bottom.
  • After Sale: If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays.
SaleBestseller No. 18
Thrush 17715 Turbo Muffler
  • CLASSIC SOUND -- Tri-flow design provides that classic Thrush sound
  • ENGINEERED TO LAST -- 100% aluminized-coated shell and spun lock heads for long life
  • FLEXIBLE SOLUTION -- Customizable design offered in a variety of styles and sizes for universal fitment (may require specialized fabrication and/or welding)
  • SPECS -- Available in a variety of body styles; 2-in., 2.25-in. and 2.5-in. inlet/outlet size configurations; see product specifications for more information
  • VERSATILE DESIGN -- Reversible flow for maximum flexibility on customized installations
Bestseller No. 19
Dynomax Super Turbo 17733 Exhaust Muffler
  • PREMIUM ACOUSTIC CONTROL -- Fiberglass matting absorbs unwanted interior resonance while maintaining a mellow performance tone
  • PRECISION DESIGN -- Exclusive flow director technology channels exhaust flow and reduces turbulence on most applications; dyno proven to flow up to 550 SCFM
  • PREMIUM PERFORMANCE -- Large flow tubes improve exhaust flow and reduce backpressure
  • ENGINEERED TO LAST -- Aluminized-steel construction reduces corrosion and internal drainage system reduces moisture collection
  • FLEXIBLE SOLUTION -- Customizable design offered in a variety of styles and sizes for universal fitment (may require specialized fabrication and/or welding)
SaleBestseller No. 20
Acouto 2.5 Inch Header Collector Gaskets 2pcs Copper Header Exhaust Collector Gaskets 2 1/2" Exhaust Gaskets Durable Reusable for SBC BBC 302 350 454 3 Bolt
  • 2 1/2" Header Collector Gasket---- The exhaust header collector gaskets are especially designed for SBC BBC 302 350 454, and fit all 2.5 inch collector with Triangle (3 Bolt Pattern). 100% brand new, please confirm whether the product is suitable before purchasing
  • High Quality Copper---- The exhaust header collector gasket is made of finest .041’’ thick solid copper with impeccable durability performance, wear-resisting, anti-strike, anti-scratch, dust-proof and colorfast
  • Sealing Performance---- Embossed port ridge for a perfect leak-proof seal, no additional sealant is required. No more worry about leaky header blues
  • Professional Manufacturing---- The header collector gasket adopts professional manufacturing process, with stable performance, high precision and good reliability. Replace old or damaged header collector gasket in time for better performance
  • Good Replacement---- With two 2.5-inch exhaust header collector gaskets for easy installation and operation. Bolts are not included. Original standard spare parts and accessories, direct replacement for the old or broken header collector gasket

Last update on 2023-01-12 / Affiliate links / Images from Amazon Product Advertising API

How to find the best muffler for 350 chevy?

Here, we’ll be going over a number of factors that you can use to ensure that you’re purchasing the best muffler for 350 chevy for you.

Regardless of which type of item you’re looking to buy, chances are that there are existing buying guides on the internet, all of which aim to give you good muffler for 350 chevy recommendations.

Despite these recommendations, however, it’s always a good idea to do your own research. In addition to this research, asking yourself the following questions is also super helpful:

  • What features does the muffler for 350 chevy need to have to be perfect for my needs?
  • What is my budget?
  • Do I need to purchase a certain brand?

Once you’ve answered these questions and have a good idea of what you’re looking for and the buying process becomes much easier. Keep in mind that when looking for the best product, there’s no need to rush. In fact, very rarely are the ideal products found by choosing the first one you see or by basing your decisions on only one factor. Take your time and enjoy the process!

Now, with the answers to the previous questions in mind, we urge you to use our upcoming buying guide for muffler for 350 chevy to find what you’re looking for:

Brand

In some cases, the brand of muffler for 350 chevy is very important. For example, if you’re looking for an item that works in tandem with another, you might very well need both products to be the same brand. If this is the case, it’s vital to pay attention to this factor, as choosing the wrong product can mean the difference between wasting your money and buying a great product that functions as it should.

Features

The features in any given muffler for 350 chevy are important because they can dictate which version of an item you need and how much money you need to spend. Consider all the key features that you want your item to have and don’t settle for anything that doesn’t check at least ¾ of your boxes.

Reviews

Customer reviews about muffler for 350 chevy are crucial – especially when you’re buying a product that costs a lot of money or serves a big importance. Luckily, most products can be found online, which means that it’s common for there to be scores of customer reviews from those who have already purchased any given product.

Pay attention to these reviews. Take note of the pros and cons that they mention, and factor these into your big decision. In some cases, you’ll be forced to sacrifice one con in order to gain a particular pro, but being aware of the potential con is going to be beneficial in either case.

Quality

Of course, quality is key. You don’t want to purchase a low-quality product. If you do, you run the risk of your item breaking, not working properly, or otherwise proving to be very disappointing, as well as a waste of money.

You can compare muffler for 350 chevy quality by researching what your potential purchases are made from, contrasting the individual items against each other to discern which one is made of the best materials.

Warranty

Warranty isn’t always going to be important, but it definitely can be. This is especially true if the item in question is tech-related or expensive. A good warranty will be valid for an extended time after purchase and cover a variety of problems ranging from item defects to random accidents, water damage, and other miscellaneous events that could ruin your product.

Conclusion

The quest to find the best muffler for 350 chevy can be daunting – but it doesn’t have to be. It can be made much easier by asking yourself a few simple questions and then thinking critically about the items you want to buy. Consider their features, quality, brand, warranty, and customer reviews and you’re more likely to make a great purchase.