Best Mono Amplifier For Car for 2022: Top 10 Picks

Sometimes it might be quite difficult to find the best mono amplifier for car. With every niche market offering so many different products, it makes sense that this is the case.

Unfortunately, this very fact can make it incredibly difficult to find the item that best suits your needs, which is why we’ve put together this mono amplifier for car buying guide.

Quick Picks:

10 Top Mono Amplifier For Car Reviews:

Bestseller No. 1
Blaupunkt 1500W 1-Channel, Monoblock Amplifier
  • 1500W Maximum Power Monoblock Amplifier
  • Optimized 563-watt RMS and a max output power of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
  • Compactly built so this amplifier can fit perfectly into any trunk
Bestseller No. 2
Planet Audio AC1500.1M Monoblock Car Amplifier - 1500 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control
  • power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
  • high level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your factory radio or aftermarket radio that does not have low-level (rca) inputs
  • low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source unit. most aftermarket radios have multiple pairs of rca outputs that can connect to multiple amplifiers
  • low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. a low-pass filter will primarily keep high notes out of your subwoofer(s)
  • variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it
Bestseller No. 3
Skar Audio RP-350.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 350W
  • Class D MOSFET Monoblock Power Amplifier
  • Peak Power at 1 Ohm: 388 Watts | RMS Power at 1 Ohm: 350 Watts
  • Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
  • Featuring 4-Way Protection Circuitry and 8 AWG Power & Ground Input Terminals for Maximum Current Flow
  • Stable at 1 ohm | Remote Subwoofer Level Control Included
SaleBestseller No. 4
JBL Club A600 - Mono amplifier (600w X 1) amplifier with Remote Level Control
  • Premium JBL Sound with 600W X 1
  • Compact size
  • High and low level input
  • Variable crossover and bass boost
  • Wired Remote Bass Control
SaleBestseller No. 5
PIONEER 500W Mono Class D AMP
  • 300W RMS x 1 @ 4Ω
  • 500W RMS x 1 @ 2ω
  • 800W RMS x 1 @ 1ω
  • Free rasp: 10hz–240khz
  • Signal-to-noise ratio: 100dB
SaleBestseller No. 6
BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifier - 1100 High Output, Monoblock, Class A/B, 2/4 Ohm Stable, Low/High Level Inputs, Low Pass Crossover, Mosfet Power Supply, Stereo
  • Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
Bestseller No. 7
Power Acoustik OD1-5000D Overdrive Series 5000 Watts Max 1 Ohm Mosfet Power Supply Class D Car Audio Monoblock Amplifier, Black
  • 1 OHM STEREO: 1-ohm stable monoblock operation for MAX power
  • DOUBLE POWER Bridge 2 monoblocks together for double power
  • MOSFET POWER SUPPLY: Military-grade PCB with PWM MOSFET power supply
  • OVERLOAD CIRCUIT PROTECTION: Direct short, thermal, and overload circuit protection
  • SPECIFICATIONS: High/speaker level and low level/RCA input; 4g power wire and 8g speaker wire outputs; Variable 12dB high and low pass crossovers; 12dB bass boost increases low octave harmonics; Dimensions (L x W x H): 16.25 x 8.75 x 4 inches; Weight: 8.22 pounds
SaleBestseller No. 8
ALPINE S-A60M 600 Watt RMS Mono Car Audio Amplifier Subwoofer Class-D+Bass Knob
  • (1) Alpine S-A60M 600 Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D. (1) Alpine RUX-KNOB.2 Remote Control Bass Knob For Select Alpine Amplifiers Amps. Specifications:
  • Alpines Class D Amplifier Circuit. CTA-2006-B Power Rating: 330W RMS x 1 (4ohm, 14.4V 1% THD+N); 600W RMS x 1 (2ohm, 14.4V 1% THD+N)
  • S/N ratio: >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohm). THD+N 0.03% (ref 1W info 4 ohm). Frequency Response: 10Hz-400Hz (+/-3 dB). Damping Factor: > 1000
  • Remote bass knob compatible (requires RUX-KNOB.2, sold separately)
Bestseller No. 9
Blaupunkt AMP1500M High-End 1500 Watts Monoblock Car Audio Amplifier/Amp +Remote
  • Blaupunkt 1500 Watt Monoblock Amplifier
  • Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz
  • Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V
  • Total Harmonic Distortion: <0.05% / RCA Input: 2-channel / Fuse: 30A x 1
  • Crossover Frequency: 40Hz - 250Hz / Crossover Slope (dB/oct): 12dB/oct
SaleBestseller No. 10
BOSS Audio Systems PM1500 Monoblock Car Amplifier - 1500 Watts, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Great for Subwoofers
  • Power - 1500 Watts Max x 1 @2-Ohms, 700 Watts Max x 1 @4-Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers

Last update on 2022-12-03 / Affiliate links / Images from Amazon Product Advertising API

How to find the best mono amplifier for car?

Here, we’ll be going over a number of factors that you can use to ensure that you’re purchasing the best mono amplifier for car for you.

Regardless of which type of item you’re looking to buy, chances are that there are existing buying guides on the internet, all of which aim to give you good mono amplifier for car recommendations.

Despite these recommendations, however, it’s always a good idea to do your own research. In addition to this research, asking yourself the following questions is also super helpful:

  • What features does the mono amplifier for car need to have to be perfect for my needs?
  • What is my budget?
  • Do I need to purchase a certain brand?

Once you’ve answered these questions and have a good idea of what you’re looking for and the buying process becomes much easier. Keep in mind that when looking for the best product, there’s no need to rush. In fact, very rarely are the ideal products found by choosing the first one you see or by basing your decisions on only one factor. Take your time and enjoy the process!

Now, with the answers to the previous questions in mind, we urge you to use our upcoming buying guide for mono amplifier for car to find what you’re looking for:

Brand

In some cases, the brand of mono amplifier for car is very important. For example, if you’re looking for an item that works in tandem with another, you might very well need both products to be the same brand. If this is the case, it’s vital to pay attention to this factor, as choosing the wrong product can mean the difference between wasting your money and buying a great product that functions as it should.

Features

The features in any given mono amplifier for car are important because they can dictate which version of an item you need and how much money you need to spend. Consider all the key features that you want your item to have and don’t settle for anything that doesn’t check at least ¾ of your boxes.

Reviews

Customer reviews about mono amplifier for car are crucial – especially when you’re buying a product that costs a lot of money or serves a big importance. Luckily, most products can be found online, which means that it’s common for there to be scores of customer reviews from those who have already purchased any given product.

Pay attention to these reviews. Take note of the pros and cons that they mention, and factor these into your big decision. In some cases, you’ll be forced to sacrifice one con in order to gain a particular pro, but being aware of the potential con is going to be beneficial in either case.

Quality

Of course, quality is key. You don’t want to purchase a low-quality product. If you do, you run the risk of your item breaking, not working properly, or otherwise proving to be very disappointing, as well as a waste of money.

You can compare mono amplifier for car quality by researching what your potential purchases are made from, contrasting the individual items against each other to discern which one is made of the best materials.

Warranty

Warranty isn’t always going to be important, but it definitely can be. This is especially true if the item in question is tech-related or expensive. A good warranty will be valid for an extended time after purchase and cover a variety of problems ranging from item defects to random accidents, water damage, and other miscellaneous events that could ruin your product.

Conclusion

The quest to find the best mono amplifier for car can be daunting – but it doesn’t have to be. It can be made much easier by asking yourself a few simple questions and then thinking critically about the items you want to buy. Consider their features, quality, brand, warranty, and customer reviews and you’re more likely to make a great purchase.