Our 10 Best Picks:
10 Best Marine Oil Change Pump Reviews:
- 【Specificaiton】: Input Voltage: DC 12V; Wattage: 60W; Current: 5A;Motor Oil (40-60 degrees) Flow Rate: approx. 0.8-1.0L / min
- 【Easy Installation】: you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.
- 【 Ideal Equipment For 】: Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.
- 【WARNING】: This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc)
- 【Package Included】: 1 x Pump; 1 x Outlet Hose; 1 x Inlet Hose; 2 x Hose Clamps; 2 x Battery Clamps
- Mercury Branded OEM PN 92-802889A1
- Fits most Mercruiser sterndrive and inboard marine engines with threaded dipstick tubes
- Includes outlet/discharge hose
- 【2 WAY USAGE】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with.
- 【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode.
- 【NO OIL LEFT】 Vacuum Fluid Extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil.
- 【Easy to Use】With FOUR UNCLES oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil.
- 【WORK FREELY】Not limited to places, change oil anytime, anywhere. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers.
- Will extract up to 50 weight of oil at a temperature of 160°F (71°C) through the engine’s dip stick tube, usually in less than 5 minutes
- 8 feet (2.4m), oil & heat resistant 1/4 inch suction tube
- 6 feet (1.8m) battery leads with aligator clips
- Four easy steps to fast, clean oil
- Self-contained oil change system
- Fill Pump: Easily refills marine motor lower unit without all the mess; The pump fits all standard 1 Quart lower unit lube bottles; Features an aluminum and plastic adapter that fits most motors for ease of use
- For Most Motors: Works with marine vehicles like boats and also auto vehicles; Fits most vehicle motors; Stow in storage spaces or in the garage
- Universal Fluid Pumps: Easy to use gas siphon pumps transfer fluid between containers or from container to engine, cooling system and more uses; Ideal for vehicles, boats, motorcycles, RVs and any other vehicle with an engine
- Interior and Exterior Car Accessories: We provide you with plenty of car auto accessories to customize your vehicle; Check out our floor mats, deer alerts, phone cup holders, chargers Bluetooth speakers and more
- Aftermarket Accessories: Custom Accessories is a family owned company and leader in the aftermarket automotive accessories marketplace; We are known for our extensive product line, product innovation and packaging solutions focusing on the consumers’ needs
- If the oil cannot be pumped after the oil change pump is started, please do not start it all the time to prevent overheating from damaging the oil change pump. Please use the product according to the instructions.【QUICK AND CLEAN OIL CHANGES】- Portable and small oil pumps are needed by everyone, simple operation does not need to spend too much time to practice, widely used in motorcycles, Car, scooters, Boat, quad bikes, trucks, Ship, forklifts, Marine, Power generation machinery, tractors, lawn mowers and various machinery to change the oil.
- 【SAFE OPERATION】- Except for engine oil and diesel, the oil pump must not draw any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104 ° F-140 ° F, Avoid clogging the oil pump due to oil solidification.
- 【ENGINE OIL CHANGE MADE EASY】 - DC 12V 100W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.7L / m, oil flow 0.35L / m).
- 【ACCESSORIES & PRECAUTIONS】- The oil pump has 2*outlet hose, 2*inlet hose, 4*hose locks,1*screwdriver, 1*Oil-proof gloves, 2*battery clips, 1*user's manual. Please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. The suction power of the micro suction pump is limited. Please do not connect other extension tubes.
- 【WARNING】: This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc) If there is any problem with this oil pump, please contact customer service in time, and you will get a satisfactory result.
- Screws onto threaded male 3/4" garden hose fitting on top of dipstick tube
- Produces up to 1 GPM (4 LPM) output
- Complete with 2' of 1/2" ID drain hose
- Fitting: connection for 3/4" GHT male thread; Dimensions: 10-1/4" long x 1-1/4" diameter.
- Fit type: Universal Fit
- High Quality 9" Long self priming Brass hand pump.
- Comes with 6mm, 8mm and 12mm plastic tubes.
- Adapter for the 6mm tube is also provided with the listing.
- Compact and Light Weight for Portability
- Extracts Heated Engine Oil Through the Engines Dipstick Tube Without Mess
- Empties Several Quarts of Oil in Just Minutes
- Includes a 10 Foot Heavy Duty Coiled Wire with Battery Clips, a 4 Foot Inlet Hose for Engine Dipstick and a 5 Foot Outlet Hose
- Note: Designed to pump warm motor oil ONLY. DO NOT PUMP ANY OTHER FLUIDS WITH THIS PRODUCT.
- 【 Work Freely 】 Portable 6 liters sturdy and lightweight extractor pump for changing fluid. Simple manual operation requires no other equipment to use with. Perfect for carrying around to complete various fluid extraction jobs.
- 【 Easy to Use 】 Create vacuum and powerful suction by pumping the handle, makes it quick to empty fluids in your equipment. The special extra-wide base designed allows you to step on it to stabilize the tank while pumping. Built-in capacity marker for easily tracking the progress.
- 【 Hominization Design 】The 59 inch transparent main tube makes checking oil quality easier, and the 42 inch suction probe is made of flexible metal for easily slide into the bottom of oil pan. Sealing cap to keep the tank well-sealed and safe. Pour spout makes it fluent to dump the waste fluid without spilling.
- 【 Wide Applications 】 EWK oil extractor is designed to drain old fluids from cars, motorcycles, lawnmowers, marine engines, watercrafts, stationary engines and industrial machinery. It's also works perfectly for low viscosity fluids such as trapped water or coolant. *Note: Gasoline, and fluid with high volatility, high corrosion, high alkalinity, high temperature are FORBIDDEN to be applied on the extractor.
- 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance.
Last update on 2023-03-22 / Affiliate links / Images from Amazon Product Advertising API