Our 10 Favorites:
Our Favorite Marine Amps Reviews:
- Marine Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,200 Watts | RMS Power at 1 Ohm: 800 Watts
- Fully Marinized with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow
- 4 CHANNEL BRIDGEABLE AMPLIFIER: Pyle’s PLMRA420 is engineered as a 4 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible. It also has high and low electronic crossover network or pass filters
- PREMIUM RCA INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high level inputs
- SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions
- POWERFUL 1000 WATT: This amplifier is powerful with its 1000 WATT maximum and dual MOFSET power supply. Comes with dual adjustable input GAIN level controls of 10k Ohm (Low) and 100 Ohm (High) speaker impedance
- MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready. It’s constructed with gold plated speaker output terminal connectors as well to combat corrosion with long term use
- Rockville ATOM 8W 8 Channel 3500 Watt Peak / 880w Dyno-Certified RMS Marine/Boat Amplifier Amp w/Bluetooth
- Compact design and extremely high power (Do not be fooled by the compact size; this amp is a beast!!!); Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc); 3500 Watts Peak System Power
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc); RMS Power Output at 4 Ohms: 70 Watts x 8 Channels
- RMS Power Output at 2 Ohms: 110 Watts x 8 Channels. RMS Bridged Power Output at 4 Ohms: 220 Watts x 4 Channels. Voltage display on amp; Configurable to 8, 6, or 4 channels
- Bluetooth Wireless with Auto Pairing. RCA Line Output. UV and Salt Water Resistant Paint, Silk Screen and Heat Sink Enclosure; 80A Fuse rating; Marine-Grade Conformal Coated Boards Resist Corrosion from Salt Spray and Moisture
- PREMIUM 4 CHANNEL AMPLIFIER: Pyle’s PLMRA400 is engineered as a 4 Channel marine amplifier that allows high quality stereo reproduction from source. This will power up your speaker and be universally compatible with a variety of head units
- RCA STEREO INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level terminal inputs
- SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions
- POWERFUL 400 WATT: This amplifier is powerful with its 100 WATT x 4 max or 400 WATT and dual MOFSET power supply. Comes with dual adjustable input GAIN level controls between 1-300mV and 4 or 8 Ohm speaker impedance
- MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready. It’s constructed with gold-plated speaker output terminal connectors as well to combat corrosion with long term use
- Digital Amplifier Technology
- Speaker Level Input w/ Signal Sensing Turn-on
- 2 Ohms Load Capability. High Pass Filter : 50Hz-200Hz, -12dB/oct (A/B)
- Power MOS-FET Switching Power Supply
- 1m (3.3ft) RCA Cable
- 4 CHANNEL BRIDGEABLE AMPLIFIER: Pyle’s PLMRA430BT is engineered as a 4 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible. It has a bridge mode selection switch and high or low electronic crossover network
- 2.1 BLUETOOTH CONNECTIVITY: Built with 2.1 Bluetooth connectivity that has a wireless range of 25+ feet. Compatible with all Bluetooth devices like iPhone, Android, iPad and tablets. It even has a smart auto connect that remembers device pairing info
- WATERPROOF & WEATHERPROOF: The audio amplifier is waterproof with its marine grade rating of IP-01. It’s constructed with silver-plated stereo speaker output terminal connectors to combat weather corrosion with long term us
- SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions
- POWERFUL 1000 WATT: This amplifier receiver is powerful with its 1000 WATT MAX and dual MOSFET power supply. Comes with dual adjustable input GAIN level controls between 4 to 8 Ohm speaker impedance
- PREMIUM 2 CHANNEL AMPLIFIER: Pyle’s PLMRMP1A is engineered as a 2 Channel marine amplifier that allows high quality stereo reproduction from source. This will power up your speaker and universally compatible with a variety of head units.
- RCA STEREO INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. This also includes a 3.5mm-to-RCA adaptor so you can connect your device and a remote for volume control.
- SHORT PROTECTION: Has a built-in power protection circuitry and soft turn on/off. These are to protect the amp and your vehicle's electrical system from short circuit conditions.
- POWERFUL 800 WATT: This amplifier is powerful with its 400 WATT maximum power supply. Comes with adjustable input GAIN level controls of 2 to 4 Ohm speak. It’s also waterproof marine grade.
- Marine amplifier delivers 2 x 100 Watts RMS at 4 Ohms, 2 x 200 Watts Max at 4 Ohms, 2 x 300 Watts RMS at 2 Ohms
- Rockville Rxm-f3 1600 Watt peak/800W RMS Marine class D mono block amplifier.
- Ceja Compliant Power Ratings: 65 watts RMS x 4 channel @4 ohms and 1% THD+N. 85 watts x 4 @ 2 ohms < 1% THD. 2 x 200 watts Bridged @ 4 ohms < 1% THD.
- Rams power Ratings: 800 watts (4 x 200 watts RMS) @ 2 ohms. 800 watts (2 x 400 watts RMS) @ 4 ohm bridged. 500 watts (4 x 125 watts RMS) @ 4 ohms.
- Peak power: 1600 watts (2 x 800 @ 2 ohms or 1 x 1600 @ 4 ohms). high-speed MOSFET power supply. Studio-grade bipolar output stage transistors.
- Fully adjustable 12Db/ octave Crossover with differential circuitry. Ch3 & Ch4 low Pass 50Hz - 3Khz. Ch3 & Ch4 high Pass 15Hz - 1Khz. Ch1 & Ch2 high Pass 50Hz - 300Hz, 500Hz - 3Khz (X10).
- Rockville RxM-S30 2400w / 600w Dyno-Certified RMS 4 Channel Proton Micro Marine Car Amplifier.
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 400 Watts (4 x 90 Watts) at 4 ohms and 1% THD+N. 600 Watts (4 x 150 Watts) at 2 ohms < 1% THD. 600 Watts (2 x 300 Watts) bridged @ 4 Ohms < 1% THD. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2400 Watts (2 x 1200 @ 2 ohms or 1 x 2400 @ 4 Ohms).
- Marine amplifier with conformal coated PCB board. High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Double Sided Surface Mount (SMD) PCB Design. Selectable +6dB/+12dB Bass Equalizer @ 45hz. Channel Separation: 50 dB. Current drawn @ MAx RMS output: 27A @ 4ohm, 40A @ 2ohm. Efficiency @ MAx RMS output: 65% @ 4ohm, 60% @ 2ohm. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. 3 Channel Mixed-Mono Capable.
- Input sensitivity: 20mV-6V. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. 2 CH / 4 CH Input Mode Switch. RCA Preamp Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator. 4 Gauge Lucite Encapsulated Power/Ground Terminals. 12 Gauge Lucite Encapsulated Speaker Terminals. THD+A: 0.01%. Frequency Response: 15Hz - 20KHz. Continuously Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Continuously Fully Adjustable
- High Pass Crossover: 50HZ - 250HZ. CH1 & CH2 High Pass 50Hz - 250Hz. CH3 & CH4 Low Pass 50Hz - 250Hz. CH3 & CH4 High Pass 50Hz - 250Hz. Full Adjustable Crossover Controls: low pass, high pass, and full pass. Sensitivity: 100dB @ 1w / 1m. S/N Ratio: >90dB. Damping Factor: > 200 @ 100Hz. 2 x 30A Fuses. 7 LBS. Dimensions: (W x H x L) 6.7" x 1.98" x 12.28"
- 8 CHANNEL BRIDGEABLE AMPLIFIER: Pyle’s PLMRA820 is engineered as a 8 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible. It also has high and low electronic crossover network or pass filters.
- PREMIUM RCA INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level inputs.
- SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions.
- POWERFUL 3000 WATT: This amplifier is powerful with its 3000 WATT maximum and MOFSET power supply. Comes with dual adjustable input GAIN level controls of 10k Ohm speaker impedance.
- MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready. It’s constructed with gold-plated speaker output terminal connectors as well to combat corrosion with long term use.
Last update on 2023-03-21 / Affiliate links / Images from Amazon Product Advertising API