Our 10 Best Picks:
Best Marine Amplifier For The Money Reviews:
- Rockville RXM-F4 Marine 4 Channel Amplifier 2400w Peak/600w Dyno-Certified RMS +PA Microphone
- Features: Rockville RXM-F4 Marine 4 Channel Amplifier 2400w Peak/600w Dyno-Certified RMS +PA Microphone. 2400 Watt Peak/1200w RMS. PA Microphone Included.
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 400 Watts (4 x 100 Watts) at 4 ohms and 1% THD+N.
- 600 Watts (4 x 150 Watts) at 2 ohms < 1% THD. 2 x 300 Watts bridged @ 4 Ohms < 1% THD. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2400 Watts (2 x 1200 @ 2 ohms or 1 x 2400 @ 4 Ohms).
- High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. CH3 & CH4 Low Pass 50Hz - 3KHz. CH3 & CH4 High Pass 15Hz - 1KHzCrossover Bandpass Control. Mute and Delay Soft Start System. 8 Volt Preamp Circuitry. ELNA Brand Audiophile Quality Capacitors.. Status Mode LED Indicator. Frequency Response: 10Hz - 40KHz. Microphone Sensitivity: 100dB @ 1w / 1m
- PREMIUM 4 CHANNEL AMPLIFIER: Pyle’s PLMRA400 is engineered as a 4 Channel marine amplifier that allows high quality stereo reproduction from source. This will power up your speaker and be universally compatible with a variety of head units
- RCA STEREO INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level terminal inputs
- SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions
- POWERFUL 400 WATT: This amplifier is powerful with its 100 WATT x 4 max or 400 WATT and dual MOFSET power supply. Comes with dual adjustable input GAIN level controls between 1-300mV and 4 or 8 Ohm speaker impedance
- MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready. It’s constructed with gold-plated speaker output terminal connectors as well to combat corrosion with long term use
- WIRELESS BLUETOOTH CONNECT: This bluetooth is built in with 2.0 version and with the wide range that could reach up to 30’ + feet even on underwater. It has power protection circuitry and electronic high crossover network that bridge
- COMPACT AND POWERFUL: This bridgeable multi-channel amp is prime class and slim pack with 2x100 Watts RMS @ 4Ohm, 2x 200Watt MAX @ 4Ohm and 2x300 Watt RMS @ 2 Ohm and has wire auxiliary RCA audio connection and integrated cable for easy installation.
- WORKS TO ALL DEVICES: This powerful multi 2-channel marine and car amplifier can immediately connect to all of your favorite gadgets such phone, ipod, iphone, android, tablet and can be used for boat or aquatic vehicle application or in your car.
- WEATHERPROOF WATER RESISTANT DESIGN: This extremely efficient, 2 channel, 200w outdoor amp is fully marinized with a waterproof and rust resistant coating on the PCB and mechanical casing. Truly, lives the one and only legacy of an auto amplifier.
- INCOMPARABLE SPEAKER: This latest 200watt 2 channel subwoofer amplifier takes your small vehicle’s no filter music audio system to the next level. It is install with full HD sound, bass control and LED lights indicator that your stereo is working.
- WATERPROOF & WEATHERPROOF: The audio amplifier is waterproof with its marine grade rating of IP-65. It has a rugged construction and integrated power wiring harness to combat weather conditions
- POWERFUL 600 WATT: This amplifier receiver is powerful with its 600 watt max. It has an anti-thump turn on and soft turn on or off to save energy. Comes with 2 to 4 Ohm speaker impedance and adjustable volume control
- 2 CHANNEL AMPLIFIER: Pyle’s PLMRMP2A is engineered as a 2-channel marine amplifier that powers up any boat stereo speaker and is universally compatible too. It has wired RCA, AUX and MP3 audio input
- SHORT PROTECTION: Built with a heavy duty heatsink, thermal overload speaker short protection to protect the amp and your vehicle's electrical system from short circuit conditions. It has 12V DC and 10A fuse
- COMPACT AND LIGHTWEIGHT: The amp is compact with an exact dimension of 5.3’’ x 3.5’’ x 2.1’’ and lightweight with only 1.94 lbs. The T.H.D is 0.1%, S/N Ratio is > 95 dB, channel separation is > 65 dB and the frequency response is 10 - 40kHz
- Rockville RXM-S20 Proton Series 1600w Peak/400w Dyno-Certified RMS 4 Channel Micro Marine/ATV Amplifier with PA Microphone Included!.
- PA Microphone with talkover - When you talk on the mic it will must the music and when you stop talking the music will come back on. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 300 Watts (4 x 75 Watts) at 4 ohms and 1% THD+N. 400 Watts (4 x 100 Watts) at 2 ohms < 1% THD.
- 400 Watts (2 x 200 Watts) bridged @ 4 Ohms < 1% THD. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). Marine amplifier with conformal coated PCB board. High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Double Sided Surface Mount (SMD) PCB Design . Selectable +6dB/+12dB Bass Equalizer @ 45hz.
- Channel Separation: 50 dB. Current drawn @ MAX RMS output: 27A @ 4ohm, 40A @ 2ohm. Efficiency @ MAX RMS output: 70% @ 4ohm, 63% @ 2ohm. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. 3 Channel Mixed-Mono Capable. Input sensitivity: 200mV-6V. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. 2 CH / 4 CH Input Mode Switch. RCA Preamp Line Output. 8 Volt Preamp Circuitry.
- Status Mode LED Indicator. 4 Gauge Lucite Encapsulated Power/Ground Terminals. 12 Gauge Lucite Encapsulated Speaker Terminals. THD+A: 0.01%. Frequency Response: 15Hz - 20KHz. Continuously Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Continuously Fully Adjustable High Pass Crossover: 50HZ - 250HZ. CH1 & CH2 High Pass 50Hz - 250Hz. CH3 & CH4 Low Pass 50Hz - 250Hz. CH3 & CH4 High Pass 50Hz - 250Hz.
- Marine Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,200 Watts | RMS Power at 1 Ohm: 800 Watts
- Fully Marinized with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow
- 4 CHANNEL BRIDGEABLE AMPLIFIER: Pyle’s PLMRA420 is engineered as a 4 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible. It also has high and low electronic crossover network or pass filters
- PREMIUM RCA INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high level inputs
- SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions
- POWERFUL 1000 WATT: This amplifier is powerful with its 1000 WATT maximum and dual MOFSET power supply. Comes with dual adjustable input GAIN level controls of 10k Ohm (Low) and 100 Ohm (High) speaker impedance
- MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready. It’s constructed with gold plated speaker output terminal connectors as well to combat corrosion with long term use
- Rockville DBM25 1500 Watt Class-AB 2-channel Marine amplifier with terminal covers
- Rockville DBM25 1500 Watt Class-AB 2-channel Marine amplifier with terminal covers. Cea Compliant Power Ratings:. 2 Ohm: 185 Watts x 2 Channel. 4 Ohm: 125 Watts x 2 Channel.
- Peak Power ratings:. 2 Ohm: 750 Watts x 2 Channel. 4 Ohm: 500 Watts x 2 Channel. 4 Ohm Bridged: 1500 watts x 1 Channel. Fully adjustable 12Db/ Octave Crossover with differential circuitry.
- Minimum THD at rated power: 90 dB. Frequency response: 10 Hz - 50 KHz. Damping factor: >100 @ 100Hz. (2) 25 amp ATC fuses. Painted conformal coating PCB board (uses 2577 waterproof glue).
- Stainless Steel end panels are rustproof. All screws and mounting hardware are stainless steel and rustproof. Bottom panel is aluminum and rustproof. High-speed MOSFET power supply. Studio-grade BIPOLAR Output stage transistors.
- PREMIUM 4 CHANNEL AMPLIFIER: Engineered as a 4 Channel marine amplifier that allows high quality stereo reproduction from source. This will power up your speaker and universally compatible with a variety of head units like MP3 and smartphone.
- RCA STEREO INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. This also includes a 3.5mm-to-RCA adaptor so you can connect your device and a remote for volume control.
- SHORT PROTECTION: Has a built-in power protection circuitry and soft turn on/off. These are to protect the amp and your vehicle's electrical system from short circuit conditions.
- POWERFUL 800 WATT: This amplifier is powerful with its 800 WATT maximum power supply. Comes with adjustable input GAIN level controls of 2 to 4 Ohm speak. It’s also waterproof marine grade.
- Included Components: 1 Pyle Branded Product
Last update on 2023-02-08 / Affiliate links / Images from Amazon Product Advertising API