Our Top 15 Picks:
15 Best High-End 4 Channel Car Amplifier Reviews:
- Rockville RXD-F30 Micro Car/ATV Amplifier 2400w Peak 4 Channel 4x150W Dyno-Certified RMS.
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) 400 Watts (4 x 100 Watts) @ 4 Ohms and 1% THD+N.600 Watts (4 x 150 Watts) @2 Ohms < 1% THD. 600 Watts (2 x 300 Watts) Bridged @ 4 Ohms < 1% THD.
- Peak: 2400 Watts (2 x 1200 @ 2 Ohms or 1 x 2400 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Conformal coated circuit board. Water resistant. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry.
- Fully Adjustable High Pass Crossover: 50Hz - 250Hz. CH1 & CH2 High Pass 50Hz - 250Hz. CH3 & CH4 Low Pass 50Hz - 250Hz<. CH3 & CH4 High Pass 50Hz - 250Hz. Selectable +6dB/+12dB Bass Equalizer. Mute and Delay Soft Start System. Double Sided Surface Mount (SMD) PCB Design.
- Full IC-Controlled Protection Circuitry. 2 CH / 4 CH Input Mode Switch. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry. Status Mode LED Indicator. 4 Gauge Lucite Encapsulated Power/Ground Terminals. 12 Gauge Lucite Encapsulated Speaker Terminals. Sensitivity: 100dB @ 1w / 1m. Damping Factor: > 200 @ 100Hz. Dual 30 Amp Maxi Fuse. Dimensions: (W x H x L) 6.7" x 1.98" x 12.28"
- Power - 450 Watts Max x 4 @2-Ohms, 225 Watts Max x 4 @4-Ohms, 900 Watts Max x 2 Bridged @4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Mosfet Power Supply - A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- 1500W Maximum Power Full-Range Amplifier
- Optimized 150-watt RMS output and a max power output of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
- This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system
- Rockville RVF-2 1200w Peak/300w Dyno-Certified RMS 4 Channel Car Amplifier Stereo Amp.
- 2 Ohm: 75 Watts x 4 Channel <1% THD+N. 4 Ohm: 55 Watts x 4 Channel <1% THD+N. 4 Ohms bridged: 150 Watts x 2 Channel <1% THD+N. High-Speed MOSFET Power Supply.
- Fully Adjustable 6dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 200Hz. High Pass Filter: 50Hz - 1.2KHz. Full IC-Controlled Protection Circuitry.
- Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. Status Mode LED Indicator. Minimum THD at Rated Power: <0.1%. S / N Ratio: >90dB.
- Under Voltage Protection at 9V. Over Voltage Protection at 16V. Frequency Response: 20Hz – 20KHz. Damping Factor: >150 @ 100Hz. Fuse: 20A x 2. Dimensions: (L x W x H) 12.2" x 8.5" x 2.24". Weight: 6.1 lbs
- Power - 100 Watts Max X 4 @2-Ohms, 50 Watts Max X 4 @4-Ohms
- Class A/B Topology - Class ‘A’ Amplifiers Have Enormous Amount Of Current Flowing Through Its Output Transistors With No Audio Signal. Class ‘B’ Amplifiers Have No Current Flowing Through Its Outputs With No Audio Signal
- Full Range - With A Full Range Amplifier You Not Only Have The Option To Run Your Speakers, But Also Your Subwoofers
- Variable Gain Control - The Gain Control Is Not For Adjusting Volume. It Simply Adjusts The Amount Of Signal That Is Coming From Your Receiver And Going To Your Amplifier
- 180 watts RMS x 2 bridged
- Class AB amp technology
- preamp and speaker-level inputs
- Power - 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- The mountable soundbar for TV, movies, music, and more
- Enjoy crisp dialogue and impressive bass from wall to wall with Playbar. Control it with the Sonos app, your remote, and more
- Whether you mount it on the wall or place it below your TV on a stand or console, Playbar automatically tunes itself for the best possible sound
- Playbar was specially tuned by Oscar-winning sound engineers to emphasize the sound of the human voice so you can always follow the story
- Easily connect Sonos speakers in different rooms over WiFi to create a home sound system that brings every room and everyone together
- Echo Plus 4-Channel RCA Interconnect Cable, Length 12ft, Providing Crystal Clear Stereo Signal for High-End Car Audio, Marine, Motorcycle & Powersports Audio
- Utilizing 99.99% Tinned Oxygen Free Multi-Strand Copper Wire Construction
- Featuring Triple Shielding for Noise Rejection and Maximum Signal Transfer. High-Rate Twisted-Pair Configuration, Aluminum Foil Shielding, Tinned Copper Strands Braided Shielding
- Double Molded RCA Connectors with Machined & Nickel-Plated Brass Contact Offers Superior Connection Integrity
- 100% UV Stable Flex Frosted White PVC Insulation Jacket Maintains the Flexibility of the Wire While Preventing Corrosion and Damage in Tough Marine Environment.
- DS 800X4 1 Ohm: For STEREO connections, the minimum impedance is 1 ohm at each channel and for BRIGDE connections is 2 ohms
- Positive / negative power supply cable: 7 AWG
- Protection fuse or circuit breaker: 60A
- Frequency Response (Full Range): 10Hz - 22KHz (-3dB)
- HPF (High Pass Filter): 90Hz (-12dB/8ª) Fixed
- Quality - This Class D 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others.
- Power – This Class D 1200 Watt RMS Car Amplifier has a power rating distribution as followed 300x4 @2 Ohms, 192x4 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.
- Crossovers- The Taramps Multichannel Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you with options of fixed 90Hz Highpass & Lowpass crossovers.
- Features – The 4 channel bass boost car amplifier has features like - Frequency Response: 9Hz-27KHZ, Bass Boost, SNR>88DB, Remote Bass Knob, 2-way protection, hi/low pass crossovers and 2 Ohm Stable
- Includes - (1) Taramps 1200W RMS 4 Channel Class D Amplifier
- Full-range
- Class-D amplifier
- 4 channels of 110 watts RMS @ 2 Ohms
- Crossover HPF and LPF
- Variable gain control
- 2400W Max Class AB @ 2 Ohm, Stable at 2 Ohm and 4 Ohm with Bass Knob Included
- S/N Ratio > 70 dB with and Input Sensitivity at 200mV-8V with Input IMP at 22k Ohms
- HPF at 80 Hz ~ 1.2 kHz with LPF at 50 Hz ~ 250 Hz and Frequency Response at 10 Hz ~ 30 kHz
- Chrome Plated RCA, Variable Gain Control with LED Power and Protection Indicators
- Dimension ( L×W×H ): 10.5 x 2.5 x 16.8 inches
- 4 channel amplifier car audio with 110 watts RMS at 2-ohm load x 4-channels (14.4v); 80 watts RMS power at 4-ohm load x 4-channels (14.4v); 160 watts RMS at 4-ohm bridged x 2-channels (14.4v)
- Small footprint and compact chassis makes this amplifier easy to install in any vehicle or 4ch amplifier car audio application; but don’t let the size fool you, this 4ch car amp produces amazing sound quality
- MOSFET pulse width modulated power supply, premium components, and proprietary heat dissipation design will ensure the four channel car amplifier runs cool for even the most demanding playlists
- 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection for your car stereo power amplifier
- Show your friends you can do 70 mph down the highway with the windows down and still have crisp and clean sound over the wind noise with this car speaker amplifier
Last update on 2023-02-08 / Affiliate links / Images from Amazon Product Advertising API