Our 10 Favorites:
The 10 Top Hifonics Amp Reviews:
- 1,200 watts max
- 600 watts x 2 at 2 ohms
- 300 watts x 2 at 4 ohms
- 1,200 watts x 1 at 4 ohms mono bridged
- Frequency response: 10 Hz to 22 kHz
- 2400 watt mono block D class amplifier
- 1 x 800 @ 4 Ohms, 1 x 1600 @ 2 Ohms, 1 x 3200 watts @ 1 Ohm
- Old school Hedonics heat sink for superior heat dissipation
- Military grade PCB
- PWM MOSFET power supply for maximum current levels
- CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio.
- BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth.
- MADE TO LAST - Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High temperature impact resistant inputs with hex screw terminals allow secure connections and are erosion resistant.
- HIGH QUALITY CONNECTIONS - RCA outputs and a daisy chain multiple amplifier build eliminates additional signal cables from the source unit. Molded secure connections are used for all wires and angled for ease of access during installation.
- CLASSIC HIFONICS LOOK - The ZXX Series maintains the classic feel of Hifonics amplifiers and include an illuminated logo on the front of the amplifier. The Hifonics logo illuminates when the amp is powered, making a statement even in the dark.
- Package Includes: (1) Hifonics ZG-1800.1D ZEUS Gamma 1800 Watt Mono Amplifier Car Audio Class D Amp, (1) RockvilIe RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
- Features of ZG-1800.1D: Low Noise Preamplifier Circuit: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion, RCA Inputs: Nickel plated high temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant, High Level Inputs: Easily tie into OEM audio systems that do not offer RCA output to maximize after market amplifier power, Operation Mode: Mono only
- Crossover Type: Onboard electronic crossover, Electronic Equalizer: Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers, Class/Topology: "Class D, High efficiency with big power in a small footprint, Output Device Technology: PWM MOSFET Power Supply, Stable power through the PC board with minimal heat generation, Heat Sink: Aluminum, Old School Hifonics Heat sink for Superior Heat Dissipation.
- Power Supply: Simpatico Coil Design, The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices, Output Connections: RCA Outputs, Daisy chain multiple amplifier to eliminate additional signal cables from the source unit, Connection Type: Secure molded connection terminal for all Power, Ground and Speaker connections. Angled for ease of access while creating a clean wire mangement profile.
- Features of RWK41: 1 - 17' High Grade Twisted Pair of 100% Copper RCA Cable, 17' - 4 Gauge Translucent Blue SuperFlex Power Cables, 17' - 18 Gauge Blue Remote Cable, 17' - 16 Gauge Clear Speaker Wire, 3' - 4 Gauge Clear SuperFlex Ground Wire, Gold Plated AGU Heat Resistant Fuse Holder, 60 Amp AGU Gold Plated Fuse, 7' Split Tube Loom, Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
- Angled Terminals for Ease of Access
- 1,200 watts max
- 600 watts x 1 at 2 ohms
- 300 watts x 1 at 4 ohms
- Frequency response: 10 Hz to 500 Hz
- POWERFUL SOUND: Deliver powerful sound to your speakers and subwoofers with this Super D Class, 4,000-watt, mono car audio amplifier; Wired bass remote included
- OPERATION: Control your sound with mono only operation, variable electronic crossover, and electronic equalizer capabilities; Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel
- OUTPUT TECHNOLOGY: Ultra-Fi MOSET output device technology and classic Hifonics aluminum construction for powerful sound, efficient cooling, and minimal distortion
- CONNECTORS: Secure molded connection terminal with easy-to-access, angled ports for all power, ground, and speaker connections and high-temperature, impact-resistant, nickel-plated connectors; Nickel-plated connectors deliver efficient high/low level audio, crisp sound, while providing a secure and erosion-resistant seal
- POWER: Power ratings: @ 1 ohms - 1 channel x 4,000 watts; @ 2 ohms - 1 channel x 2,200 watts; @ 4 ohms - 1 channel x 1,100 watts; Dual coil Pulse Width Modulated power supply keeps voltage constant through Ultra-Fi output devices
- Hifonics Brutus BXX6000.1D 6000 Watt RMS 1-Channel Car Amplifier Mono
- Power @ 1 Ohms: 6000 Watts | Power @ 2 Ohms: 3000 Watts| Power @ 4 Ohms: 1500 Watts
- Classic aluminum Hifonics design to minimize heat build up on the Ultra-Fi output devices
- 1 Mono channel operation mode with Bass Knob Control Included
- Nickel-plated RCA jacks create the most efficient audio connection and resist corrosion
- 2,200 watts max
- 1,100 watts x 1 at 2 ohms
- 550 watts x 1 at 4 ohms
- Frequency response: 10 Hz to 500 Hz
- Super Class D technology powered by Ultra-Fi MOSFETs for high power, efficient cooling with minimal distortion
- 1,900 watts max
- 950 watts x 1 at 2 ohms
- 475 watts x 1 at 4 ohms
- Frequency response: 10 Hz to 500 Hz
- Super Class D technology powered by Ultra-Fi MOSFETs for high power, efficient cooling with minimal distortion
- 3,300 watts max
- 1,650 watts x 1 at 2 ohms
- 825 watts x 1 at 4 ohms
- Frequency response: 10 Hz to 500 Hz
- Super Class D technology powered by Ultra-Fi MOSFETs for high power, efficient cooling with minimal distortion
Last update on 2022-08-12 / Affiliate links / Images from Amazon Product Advertising API