Our Top 10 Picks:
10 Best Hideaway Subwoofer Reviews:
- RMS Power: 150 Watts
- Ultra-compact powered subwoofer system designed for tight locations
- Dimension: 13 7/8 x 9 3/8 x 3 1/8
- 8-inch internal subwoofer
- 150-watt (RMS, 14.4v) power amplifier
- Perfect for trucks or cars with limited space the Massive Audio BOOM 88 Powered Hideaway Subwoofer displays a fine balance between high performance, accurate sound reproduction and reliability!
- This easy to install car audio active subwoofer will provide the perfect amount of clean yet powerful bass to your system.
- Additional features like ATO (automatic turn on) lets you tap into the cars speaker leads with the optional UW-1 (High level RCA adapter) or HI-LOW (high low converter) instead of using the headunits RCA's and will automatically turn on the unit when the car's radio is on.
- Add a 180 degree phase shift and bass boost; what else can you ask for in an active subwoofer. GAIN REMOTE INCLUDED!
- Now includes a 10-inch sub model, along with the 8-inch
- 180 Watt amplifier drives the HS10; 150 Watt amp the HS8
- Ultra-compact at just more than three inches high
- Minimal parts and quick-connect Molex plug and harness
- Remote bass control included
- Primary Power Output Rating 135W at 2Ω, 20-200Hz and ≤ 1% THD+N
- Compact Design (Measures 13.5" x 9.5" x 3")
- Dynamic Power Output Rating 200W at 2Ω, ≤ 20% THD+N
- High and Low Level Inputs / Remote Bass Knob Included
- 400mV to 5V Signal Input / SNR Rating 91 dBA
- 30W 8-Inch Amplified Subwoofer.Power source type:Corded Electric.Speaker size:8 inches
- Made with the highest technical quality to ensure maximum reliability and durability
- MAX power handling 300 watts (300 Watts Peak) and an RMS power handling of 120 watts (300 Watts Peak)
- Features variable bass boost, adjustable input sensitivity, and a low-pass filter
- 600 WATT POWER: Pyle’s 8" Amplified Low Profile Subwoofer System offers a maximum power of 600 watts. It lets you pump out some great low frequency bass volume to enhance the party vibe making it a great addition to your car music audio system
- BUILT-IN AMPLIFIER: The integrated amp in the compact subwoofer features low pass crossovers & a control for adjusting input sensitivity from 0.12V to 3.5V. Includes variable bass boost, control the subwoofer level w/ the remote level control module
- LOW PROFILE: With height of just 3", it's a perfect solution when space is an issue, it can easily fit under the seat of most vehicles! Total dimension is 12.8”x9.5"x3” & includes mounting hardware. A great addition to your car stereo sound system
- HIGH LEVEL INPUT: Speaker line inputs are known as high-level inputs. If your head unit does not have RCA outputs, you can use the speaker outputs for the audio source. Use the supplied cable and connect the outputs properly as shown in the manual
- LOW LEVEL INPUT: Line level inputs, also known as RCA input or low-level inputs. Low level inputs are the recommended way to introduce the audio signal to the hideaway subwoofer if RCA outputs are present on your head unit or other signal source
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- 1300 W Max Power (350 W Nominal) Pre-loaded 12" Injection Molded Polypropylene (IMPP) Composite Cone Construction Subwoofer
- Built-in 300 W Max (150 W RMS) Class D amplifier
- Ported enclosure design for powerful, deep and accurate bass response
- Variable Bass Boost (0 to +12 dB, 20Hz to 130Hz)
- Power Handling: Peak: 550 watts RMS: 200 watts
- PWM MOSFET Power Supply/Thermal Protection Circuit Remote Subwoofer Control Included RCA and High-Level Inputs
- Delayed Soft Remote Turn On Adjustable Input Sensitivity
- Variable Bass Boost: 0 - +12 dB Variable Low-pass Filter: 85 - 150 Hz
- Constant Subsonic Filter: @ 35Hz Selectable Phase : 0 or 180 degrees
- Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.
- 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.
- Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
- Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.
- Thermal Protection Circuit, Short Protection Circuit.
Last update on 2023-06-06 / Affiliate links / Images from Amazon Product Advertising API