Our Favorite Picks:
20 Best Enclosed Subwoofer For Car Reviews:
- Fully functional and easy to debug
- 68 mm Slim fuselage, installed under the seat, the effect is better
- 10 inch woofer speaker
- Design of high temperature resistant coil
- Black paint stainless steel mesh, no rust, no deformation
- This ultra-thin subwoofer is designed to be placed at the bottom of the car seat, bringing you a more wonderful journey experience.
- Tuned by a senior sound engineer, it has strong and elastic low frequency, which makes every note vibrate in your ear.
- The two-in-one configuration of the power amplifier and the loudspeaker makes the installation in one step and saves the space inside the car. It has an ultra-thin thickness of 2.7 inches and can be installed under most car seats.
- We provide you with high-quality super-long cables and control wires, so you don't need to buy other accessories.
- Our products have been tested strictly and have reliable quality, and we provide you with a 12-month warranty.
- BOOSTED OUTPUT CAPABILITY – specialized tuned port with computer aided design, 2” Voice Coils and 41-ounce magnets will vastly increase output efficiency for your subwoofers providing you with consistent low sounding bass
- DIGITALLY OPTIMIZED SUBWOOFERS – Carefully crafted for efficient and accurate bass, 1, 200 Watts of peak power, 400 watts RMS at 2 Ohm impedance and frequency range 30Hz – 250Hz for unrivalled sound
- ILLUMINATED TRIM RING – its illumiNITE design creates a surreal viewing experience while the ventilated control circuitry system ensures system coolness during peak usage delivering studio quality performance
- SOUND MDF CONSTRUCTION – and top grade in-line automotive carpet eliminates the vast majority of enclosure movement for streamlined sound quality via both 12-inch subwoofers for unmatched sound superiority on the road
- DIMENSIONS – 30” W x 14” D x 13” H
- 600 WATT POWER: Pyle’s 8" Amplified Low Profile Subwoofer System offers a maximum power of 600 watts. It lets you pump out some great low frequency bass volume to enhance the party vibe making it a great addition to your car music audio system
- BUILT-IN AMPLIFIER: The integrated amp in the compact subwoofer features low pass crossovers & a control for adjusting input sensitivity from 0.12V to 3.5V. Includes variable bass boost, control the subwoofer level w/ the remote level control module
- LOW PROFILE: With height of just 3", it's a perfect solution when space is an issue, it can easily fit under the seat of most vehicles! Total dimension is 12.8”x9.5"x3” & includes mounting hardware. A great addition to your car stereo sound system
- HIGH LEVEL INPUT: Speaker line inputs are known as high-level inputs. If your head unit does not have RCA outputs, you can use the speaker outputs for the audio source. Use the supplied cable and connect the outputs properly as shown in the manual
- LOW LEVEL INPUT: Line level inputs, also known as RCA input or low-level inputs. Low level inputs are the recommended way to introduce the audio signal to the hideaway subwoofer if RCA outputs are present on your head unit or other signal source
- 5/8" MDF Construction.Impedance: 2 ohm.Power source type:Corded Electric.Speaker size:12 inches
- Frequency response: 10Hz - 150Hz. Aviation Grade Carpet
- Embroidered Terminator Logo; Impedance: 2Ω
- Combines the sleek looks and power of a Terminator mono block amplifier with either a sealed enclosure
- Houses two 12-Inch Terminator subwoofers, TNP212D2, or a vented enclosure
- POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room.Mounting Type: Floor Standing
- LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. BLENDS EASILY WITH ANY SPEAKER and plays the most demanding nodes effortlessly without any distortion
- DOUBLE THE AMPLIFIER POWER TO 100 Watts of Dynamic Power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and FIT FOR EXTENDED USE
- EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly. Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
- A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a Phase Toggle Switch for multiple subwoofers, make this sub cohesive and complete
- 10" Shallow Subwoofer Down-Fire Sealed Enclosure
- Peak: 1200 watts | RMS: 400 watts
- Impedance: 4 Ohm | Frequency Response: 30Hz - 500Hz | Sensitivity: 95dB
- Spun Aluminum Cone | Rubber EPDM Surround | Copper Wound Kapton Voice Coil | MDF Construction
- Dimensions: 18.7" W x 6.1" H x 12.2" D
- Single 8-Inch Vented Loaded Subwoofer Enclosure Bass Tube (Passive)
- Peak Power: 400 Watts | RMS Power: 200 Watts
- Dual 2-ohm Voice Coil Subwoofer wired internally to a 1-ohm Final Impedance Load
- Highly Efficient and Powerful Subwoofer | Frequency Response Range: 35Hz - 250Hz
- Vented Enclosure Tube Design Delivers Powerful and Responsive Bass Output
- Rockville VS8K54 Single 8" K5 800w Car Subwoofer Pre-loaded In Vented Sub Enclosure.
- Features: Peak Power Handling: 800 Watts. Program Power Handling: 400 Watts. CEA Rated RMS Power Handling: 200 Watts. Final Impedance: 4 Ohm. MDF enclosure. Bonded stapled and braced. Computer designed vents. Angled at 15 % for perfect bass alignment. High quality aviation grade tweed carpet. Satin Nickel speaker wire push terminals. Enclosure air space is 0.6 Cu Ft per sub. Vent dimensions (inches): 1.25" x 4.75" x 7". Tuning frequency of enclosure: 37 Hz.
- 1.5" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire. The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire. 30 Oz High Quality Magnet. Cast Iron Basket With Black Sanded Finish. Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone. This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it.
- Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Blue Stitching Cone Reinforcement Ensures Long Life. Polypropylene dust cap. Gold-Plated spring loaded push terminals. Impedance: Single 4-Ohm Voice Coils. Vented Hole on T-yoke Enhances Heat Dissipation. Mounting Gasket with Rockville branding looks great and Makes it Easy To Mount the Subwoofer Air-Tight. High BL Magnetic Motor Gap.
- Detailed Info of Subwoofer:: Body: Non-Pressed Paper. Gap Plate Inside Diameter: 60mm (2.36 inches). Gap Plate Outside Diameter: 120mm (4.72 inches). Gap Plate Thickness: 25mm (0.98 inches). Yoke Outside Diameter: 114mm (4.48 inches). Yoke Thickness: 5mm (0.20 inches). Yoke Pole Diameter: 38mm (1.5 inches)
- Rockville RW68CA 6x8" 400w Slim Under-Seat Powered Car Subwoofer.
- Enclosure is made out of cast aluminum which stays cool at all times. Peak Power Handling: 400 Watts. RMS Power Handling: 100 Watts.
- Our most compact powered subwoofer. High Level Inputs with Auto Turn-On Technology.
- Low Pass Filter: 50Hz - 180Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz. Adjustable Input Sensitivity. Includes remote bass knob. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit, Overload Protection.
- Heavy Duty Mounting Feet. PWM MOSFET Power Supply. Low Level RCA Input. Green Power/Red Protect LED. Phase Switch: 0° or 180°. THD: < 0.4%. Fuse Rating: 20A. Impedance: 4 Ohm
- 200-watt max, 120-watt RMS power output
- Designed to add extra bass to a car audio system that’s short on space
- built-in matched amp eliminates need to buy a separate amp, saves space, and easier to install
- Frequency response: 50 Hz to 150 Hz
- 8 in. preinstalled woofer
- Rockville DV8K52 Dual 8" K5 1600w Car Subwoofers Pre-loaded In Vented Sub Enclosure.
- Features:.Peak Power Handling: 1600 Watts. Program Power Handling: 800 Watts. CEA Rated RMS Power Handling: 400 Watts. Final Impedance: 2 Ohm. ¾” MDF enclosure. Bonded stapled and braced. Computer designed vents. Angled at 15 % for perfect bass alignment.
- High quality aviation grade tweed carpet. Satin Nickel speaker wire push terminals. Enclosure air space is 0.8 Cu Ft per sub. Vent dimensions (inches): 2.5" x 6.75" x 9.75".
- Tuning frequency of enclosure: 44 Hz. 1.5" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire. The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire.
- 30 Oz High Quality Magnet. Cast Iron Basket With Black Sanded Finish. Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone – This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it.
- SDR Series Single 8-Inch Dual 2-ohm Loaded Subwoofer Enclosure
- Peak Power: 700 Watts | RMS Power: 350 Watts
- Pre-wired Internally for a 1 Ohm Final Impedance Load at the Terminals for an Easy Installation
- Premium Vented Enclosure Made of High Strength MDF and Finished in Black Carpeting
- Double Front Baffle with Countersunk Subwoofer Mounting Design for Flush and Attractive Appearance
- Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.
- 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.
- Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
- Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.
- Thermal Protection Circuit, Short Protection Circuit.
- Rockville Rws12ca slim 1200 Watt 12" Amplified powered car Subwoofer Enclosure..Impedance: 4 ohm.Speaker size:12 inches
- 1200 watts peak power output. 300 watts RMS. 12" Super slim subwoofer.
- Ultra stiff composite pulp cone with Kevlar reinforcement. 3D molded acrylic dust cap. Expanded & Rolled Steal basket.
- High density laminated foam Surround. High power strontium magnet with ultra Saturated high BL motor structure.
- Vented core magnet motor structure. 2" High temperature aluminum voice coil. 8mm washer & yoke plates. 13.6mm Peak-to-Peak x-max. 70oz.
- Power Rating: 200 Watts RMS / 600 Watts Max
- Cone Material: Spun Aluminum Cone | Surround Material: High Strength Rubber EPDM Enhanced Surround
- Final Impedance: 4-Ohm | Copper Wound Kapton Voice Coil | Push Type Terminals
- Sensitivity: 90dB | Frequency Response: 32Hz - 500Hz
- Enclosure Dimensions: 12.09" x 5.7" x 9.45" / 307mm x 145mm x 240mm
- Spun copper front-firing Cerametallic woofers
- 10-inch, front-firing driver
- 150 watts continuous, 300 watts dynamic power
- Strong, flexible, removable grille
- All digital amplifier for high-efficiency and true-to-source sound accuracy
- POWER: 160 Watts Built-In Class D Max Power
- SOUND QUALITY: Active EQ has 3 types of bass to match your music genre. Heavy, Flat and Tight. Custom adjust the bass to your music
- REMOTE CONTROL: Included wired remote control for precise sound adjustment from your seat
- COMPACT DESIGN: Allows for installation almost anywhere, including tight spaces such as under a seat or panel
- DIMENSIONS: 11 x 2-3/4 x 7-7/8 Inches
- Power: 200W RMS @ 2Ω @100Hz, 450W MAX
- Bass Boost: 0-12dB Subsonic Filter: 35Hz LPF Filter: 75-150Hz Phase Switch: 0 or 180 degrees
- PWM MOSFET Power Supply/Thermal Protection Circuit Adjustable Input Sensitivity Remote Subwoofer Control Included
- RCA and High-Level Inputs Delayed Soft Remote Turn On Slim 10” 2Ω subwoofer Remote Bass Knob Included
- Dimensions: 13.6” X 9.65” X 2.8”(L X W X H) 345 X 245 X 72 mm (L X W X H)
- Primary Power Output Rating 135W at 2Ω, 20-200Hz and ≤ 1% THD+N
- Compact Design (Measures 13.5" x 9.5" x 3")
- Dynamic Power Output Rating 200W at 2Ω, ≤ 20% THD+N
- High and Low Level Inputs / Remote Bass Knob Included
- 400mV to 5V Signal Input / SNR Rating 91 dBA
Last update on 2023-02-08 / Affiliate links / Images from Amazon Product Advertising API