We Recommend:
Best Cyclone Dust Collector For The Money Reviews:
Bestseller No. 1 
JET JCDC-1.5 Cyclone Dust Collector, 2-Micron Filter, 763 CFM, 1-1/2HP, 1Ph 115V (717515)
- Constant Suction: Heavy debris is pulled down to the collection drum before debris stream reaches the filter
- Increased System Efficiency: Direct-mounted filter allows unrestricted airflow
- Efficient Filtering: Pleated filter captures 99% of two-micron particles and 86% of one-micron particles
- Quick Emptying: Heavy debris is captured in a 20-gallon steel drum featuring quick release levers and independent casters
- Convenient Controls: Radio frequency remote control turns on the system from up to 50 feet away
Bestseller No. 3 
Cyclone Dust Collector 2.0'' DIY Dust Separator Extractor with 2 Filters, Shop Dust Collector Accessories Cyclone Vacuum Cleaner Filter, for Woodworking, Ash, Metal Shavings, Grain etc
- DIAMETER 2.0'': 2" OD inlet (connects to your tools) and 2" OD outlet (connects to your collector). If the size of the hose is too small, you can heat the hose and then put it on the diameter of the dust collector. The diameter of the air inlet and outlet of our dust collector is 2.0'', if you are 1.25'', 1.5'', 2.5'' or other caliber vacuum cleaners, you can buy a caliber converter yourself. Total dimensions are approx. 30 cm (H) x 14cm (W). Very compact and space-saving.
- FILTER : No. 1 filter element: Through Hole (For woodworking sawdust, dust, etc.), filter element with large holes at the bottom, No. 2 filter element: Blind Hole (Only for ash), filter element without large holes (need to be equipped with a motor above 1200W). Only applicable to ash, such as: stove ash, grass ash and other burning residues (To avoid blockage, remember not to use it in other scenarios).
- SUITABLE for STURDY BUCKET: Because our product has a good seal, we hope you can notice that when the vacuum cleaner is sealed with the bucket, the suction will be very strong, thinner barrels are relatively difficult to withstand strong suction, so it is more prone to the deformation of the bucket. In this case, it is only necessary to replace the bucket with a stronger one. At the same time, it also shows that this has nothing to do with the size of the dust collector.
- WET OR DRY – This simple and efficient design can be adapted for use with more make, size, or model wet/dry vacuum and features 2. 0" ports for secure fittings using dust collection hose sizes. Works with most materials: wood dust, drywall dust, concrete dust, clay/silica dust, blasting soda, cooled ash, metal shavings, baking flour, grass & leaves, pet/animal hair, pharmaceutical waste, and much more!
- DIMENSION: inner diameter is 50 mm, outer diameter is 55 mm. Total dimensions are approx. 30 cm (H) x 14cm (W). Very compact and space-saving. The parts of the cyclone cutter are firmly assembled, so that the cyclone dust cutter is airtight, robust and durable.
Bestseller No. 4 
Cen-Tec Systems 97470 Quick Click Dust Collection Separator, Translucent
- Designed to efficiently separate dust, debris, and liquids from an airstream and collect the material in a general purpose recovery bin reducing the materials which reach the vacuum
- 8” upper housing with curved surfaces insures the debris entering the separator travels freely past the center baffle and smooths the airstream path which minimizes its impact on the performance of the vacuum and raises efficiency
- Designed around industry standard vacuums and hoses to make connecting the separator easy and efficient with minimal need for adaptors or duct tape. Both the intake and outlet to the vacuum are designed to be compatible with industry standard wet-dry domestic vacuums and their hoses like Rigid, Shop Vac, Vacmaster, Dewalt, and many other brands. The hoses will fit male into the 2.375” inlet. The outside of the inlet and exit to the vacuum are designed to accept popular 2.5” dust collection wire support hoses commonly used in home and commercial workshops
- Commercial grade rubber mounting gasket insures against air leaks that can rob performance
- Ideal for use in a broad range of applications including woodworking, auto body detail shops, commercial painters, sheet rock installation and repair, remodelers, construction clean-up contractors, stone counter top production shops, hard wood floor refinishers, liquid capture, gardening, and slurry collection
SaleBestseller No. 5 
POWERTEC 70293 Cyclone Dust Collector and Separator Kit w/Clear 6 Gallon Dust Bucket, Hoses, Reducers, Couplers and Hose Clamps
- INCLUDES: Dust Separator, 6 gallon dust & debris bucket, expandable vacuum hose, reducers, couplers, hose clamps and more
- APPLICATION: Cyclone separator kit connects to your shop vac and tool dust collector ports and provides you with a complete assortment of components designed to capture and prevent wood chips and shavings from damaging your system
- VERSATILE: Reducers and couplers work with most brands and dust collection systems, accommodating tools such as planers, drum sanders and jointers - Has everything you need to optimize your 2 stage dust collector set-up
- EASY TO USE: Whether you’re connecting the separator directly to the dust collector, shop vac or tool dust port, you’ll find that it sets up quickly and easily while generating great separation
- PREMIUM: All included parts are made from durable, high quality and temperature/heat resistant material with an anti-clogging design for optimal efficiency
Bestseller No. 6 
Oneida Air Systems Dust Deputy 2.5 Plus Anti-Static Cyclone Separator Kit with Quick-Release Lid for Wet/Dry Shop Vacuums
- INCREASED SUCTION POWER - The original and still the best! Now 20% more throughput (CFM) and efficiency with Neutral Vane Technology, Oneida Air Systems' patented Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!
- LATEST AND GREATEST EDITION - NEW 2.5 model delivers up to 2x the airflow of smaller cyclones and lid-style separators. This simple and efficient design can be adapted for use with any make, size, or model vacuum and features female inlet and outlet ports that fit the cuffed 2.5" hoses of larger shop vacuums.
- LONGER LIFESPAN - Prevents fine dust and large debris from reaching your shop vacuum's filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy Plus will save you money on expensive replacement filters and dust bags, and time, allowing you to focus on the task at hand.
- MADE IN AMERICA – Designed, patented, & manufactured in the USA, our Dust Deputy 2.5 Plus kit lets you build the dust control system that’s right for you. Kit contains the anti-static cyclone separator, collapse-proof bucket lid (designed to fit most 5-gallon buckets), hose, gasket, & mounting hardware. You supply the waste container. US Pat. #7282074, #RE40048
- Works with most materials: wood dust, drywall dust, concrete dust, clay/silica dust, blasting soda, cooled ash & soot, water, metal shavings, baking flour, grass & leaves, pet/animal hair, pharmaceutical waste, and much more! Note: If used with a 5-gallon bucket, the bucket must be a minimum of 90 mils thick or else it may collapse under vacuum pressure. We recommend using a bucket dolly for the most stable set-up.
Bestseller No. 7 
Mullet High-Speed Cyclone Dust Collector
- THE FASTER THE SPIN, THE MORE DUST THAT FALLS IN! -- Parabolic design and seamless one-piece construction create a faster airstream, more suction power and better capture efficiency than ordinary straight-wall cyclone-and-bucket assemblies.
- RIGID, CUT-TO-FIT PVC CONNECTION -- Eliminates the Frankenstein-like assembly of bolts, bungees, and duct tape of other systems creating a unified, airtight connection and a vac filter that stays cleaner, longer.
- UNIVERSAL VAC COMPATIBILITY -- Included Hose Adapters allow for easy connection to virtually all wet dry shop vacuums, dust extractors and their hoses. Red, orange, yellow or green; tall, short, big or small; Mullet is made to fit 'em all!
- MADE IN USA -- Headquartered in Dripping Springs, Texas.
- MADE IN USA -- Headquartered in Dripping Springs, Texas.
Bestseller No. 8 
4 inch Dust Separator Cyclone Dust Collector Kit for Use with Barrels Trash Cans Buckets or Custom Built Containers
- There’s no doubt about it, large cyclone dust collector systems are great! Their value to larger and industrial or commercial workshop settings is immeasurable. What about the rest of us with garage size workshops who don’t want the noise, space consumption or simply the large cost of such a system in their home workshop? The 4” Dust Separator Cyclone Kit is the perfect and economical solution for the everyday woodworker with a smaller to midsize workshop.
- This cyclone kit will help protect your dust collector from unnecessary wear and tear. Once installed on a barrel, box, or any container (barrel or box not included), this dust and debris separator keeps the larger, heavier chips coming from you machinery from getting into your dust collector impeller. This will ad years to the life of your dust collector and help keep your bag emptying chores to a minimum.
- The working theory behind cyclone separators is that the heavier wood chips fall to the bottom of the container while the lighter dust particles get pulled in the out feed port and into your dust collector or vacuum. This keeps the large debris from slamming into your dust collector’s impeller or filling up your shop vacuums container to quickly. This also helps prevents any unnecessary damage to dust collector impellers.
- Another advantage to using cyclone style separators is that your bottom bag on dust collector machines or shop vacuum containers won’t fill up nearly as quick than they would without a cyclone style separator. This means you can use the cyclone separator with your planer, jointer or router tables without having to empty the bag or vacuum containers nearly as often.
- The 4” Separator Cyclone kit comes with 2 ea. 4" Ports (for top side of separator) 2 ea. 4" in feed elbow ports (for bottom side of separator) 1 ea. hardware pack and 2 ea. easy to secure 4" turn key hose clamps. Hose, barrel or container are required for this kit to properly work. Hose, barrel or container are NOT included.
Bestseller No. 9 
Oneida Air Systems Dust Deputy Anti-Static Cyclone Separator (DD Bagger)
- INCREASED SUCTION POWER - Now 20% more efficient with Neutral Vane Technology, Oneida Air Systems' patented Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!
- LONGER LIFESPAN – Prevents fine dust and large debris from reaching your dust filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy Bagger will save you countless time and money on expensive replacement vacuum filters and dust bags, allowing you to keep working harder, longer, and safer than ever!
- INNOVATIVE BAGGER SYSTEM - Wall-mounted Bagger kit offers high waste capacity, visible fill level, and easy disposal.
- WET OR DRY – This simple and efficient design can be adapted for use with any make, size, or model shop vacuum and features tapered 2.0" ports that fit the cuffed 2.5” hoses that come standard with most shop vacuums. Works with most materials: Wood dust, drywall dust, concrete dust, clay/silica dust, blasting soda, cooled ash & soot, water, metal shavings, baking flour, grass & leaves, pet/animal hair, pharmaceutical waste, and much more!
- MADE IN AMERICA – Comes with everything you need to convert your wet/dry vacuum into a two-stage, dust-free system. Including anti-static cyclone separator, 3.9-gallon accumulation bin, wall mount, hardware, and five clear 4 mil bags. US Pat. 7282074 and patent pending
Bestseller No. 10 
POWERTEC 70299 Dust Collection Cyclone Separator Lid for 5 Gallon Dust Collector Bucket Canister w/ 2-1/2 Inch Hose Ports, Elbow Fittings
- INCLUDES: (1) Dust Separator Lid and (1) 2-1/2” OD 90 degree elbow
- FUNCTION: Converts your single stage dust collector into a two-stage unit when used in conjunction with 5 gallon bucket/ common trash can - Collects large workshop sawdust, drywall dust, concrete dust, wood chips and heavier shavings before they reach your impeller and collection bags
- FEATURES: An impressively high-caliber seal with foam gasket and increased cyclonic airflow efficiency with elbow friction fitted underneath the inlet side
- COMPATIBILITY: Lid inlet and outlet ports accept 2-1/2” ID hose and fits 5 gallon buckets with maximum diameter of 11-3/4"
- PREMIUM BUILD: Made with high quality ABS plastic - possessing long term durability, impact resistance and shock absorbance made to withstand the abrasive nature of dust collection
Last update on 2023-03-21 / Affiliate links / Images from Amazon Product Advertising API