Best Cold Weld 2022: Top 10 Picks

Sometimes it might be quite difficult to find the best cold weld. With every niche market offering so many different products, it makes sense that this is the case.

Unfortunately, this very fact can make it incredibly difficult to find the item that best suits your needs, which is why we’ve put together this cold weld buying guide.

Our 10 Recommendations:

10 Best Cold Weld Reviews:

SaleBestseller No. 1
J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.
  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey.
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
Bestseller No. 2
J-B Weld 8276 KwikWeld Quick Setting Steel Reinforced Epoxy - Dark Grey 2 oz
  • J-B Weld Kwikweld: A Fast Setting Version Of The Original Cold Weld Two-Part Epoxy System That Provides Strong, Lasting Repairs To Multiple Surfaces. Perfect For Diy Household, Automotive, Marine, Craft Repair And Much More
  • Cure And Set Time: After Mixing The Tubes At A 1: 1 Ratio, It Takes 6 Minutes To Set And 4-6 Hours To Cure. Once Cured, Kwikweld Can Be Tapped, Filled, Sanded, Molded And Drilled. Kwikweld’S Set And Cure Color Is Dark Grey
  • Versatile And Dependable: J-B Weld Kwikweld Is Steel Reinforced, Has A Tensile Strength Of 3127 Psi And Can Withstand Temperatures Up To 230 Degrees Fahrenheit (110 Degrees Celsius). When Fully Cured, Kwikweld Is Waterproof And Resistant To Petroleum, Chemical And Acid
  • Surface Applications: Metal, Plastic & Pvc, Wood, Concrete, Ceramic & Tile, Fiberglass And More
Bestseller No. 3
Permatex 14600 Cold Weld Bonding Compound, Two 1 oz. Tubes , Black
  • 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing
  • Repairs, fills and bonds to iron, steel, brass, bronze, aluminum and copper; can be drilled, tapped, threaded, filed, sanded and painted once cured
  • Over 3,000 PSI shear strength on steel; resists most automotive, shop and cleaning fluids
  • Temperature Range: up to 300°F intermittent
  • Suggested Applications: Aluminum, steel, brass, bronze, castings and stampings
Bestseller No. 4
J-B Weld 8267 SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz.
  • J-B Weld Steelstik: A Hand Mixable Two Part Epoxy Putty Stick That Is Steel Reinforced & Non-Rusting To Quickly Repair Or Rebuild Anything Made Of Metal! J-B Weld Steelstik Is Certified By The Nsf And Is Safe For Contact With Potable Water
  • Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Steelstik Takes 5 Minutes To Set And Cures In 1 Hour. J-B Weld Steelstik Set And Cure Color Is Dark Grey
  • Product Features And Strength: J-B Weld Steelstik Has Lap Shear Strength Of 900 Psi, Can Withstand Continuous Temperatures Up To 350F (176C ) And Intermittent Temperatures Of 450F (232C), And Is Chemical Resistant Against Petroleum, Hydraulic Fluids And Other Chemicals When Fully Cured. Steelstik Can Be Molded, Shaped, Sanded, Drilled And Tapped
  • Surface Applications: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass And Plastic & Pvc
Bestseller No. 5
J-B Weld 8297 HighHeat 550 Degree Epoxy Putty Stick - 2 oz.
  • J-B WELD HIGHHEAT: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild materials that will be exposed to high temperatures in automotive and industrial maintenance applications. J-B Weld HighHeat is designed for DIY repairs on exhaust manifolds, tail pipes, mufflers, engine blocks, duct work and other various high temperature projects.
  • CURE AND SET TIME: After kneading the two part formula together by hand, HighHeat takes 1 hour to set and cures in 8 hours. J-B Weld HighHeat set and cure color is machine grey.
  • PRODUCT FEATURES AND STRENGTH: J-B Weld HighHeat has lap shear strength of 800 PSI at room temperature and 600 PSI at 400oF (204oC) or more. HighHeat is able to withstand continuous heat up to 450oF (232oC) and intermittent heat of 500oF (260oC). HighHeat is 3x stronger at higher temperatures than conventional epoxy puttys and can be tapped and drilled.
  • MAJOR USES: Exhaust Manifolds, Tail Pipes, Mufflers, Engine Blocks, Duct Work, Machinery and other high temperature equipment.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
Bestseller No. 6
J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Black - 25 ml
  • Plasticbonder: Is A Quick-Set, 2 Part, Urethane Adhesive System That Provides Strong, Lasting Repairs And Works On Thermoset, Carbon Fiber Composites, Thermoplastics, Coated Metals, Concrete & More.
  • Count On Us: For More Than 40 Years, Our Products Have Earned A Loyal Following From People Who Take Pride In Their Work. With Each Product We Innovate, We Continue To Provide The World'S Strongest Bond For Your Projects.
  • Simple To Use: J-B Plasticbonder Has A 1:1 Mixing Ratio, Sets In 15 Minutes And Can Be Sanded After 30 Minutes. With A Tensile Strength Of 3770 Psi, Plasticbonder Cures To A Hard, Permanent Bond.
  • Versatile And Dependable: Perfect For Indoor Or Outdoor Use, Epoxy & Adhesives, Plastic, Composite, Pvc, And More. Plastic Bonder Makes A Great Gap Filler And Dries Black In Color.
Bestseller No. 7
Metal Repair Magic ab Glue 100 Gram, Epoxy Glue Metal, Cold Weld Metal Repair, Crazy Glue Metal Adhesive Paste Heavy Duty, Metal bonding epoxy Putty, Industrial high Heat Resistant Casting Glue
  • Package include: ( 50 g A tube +50 gramB tube of ab glue) total 100 gram + ENGLISH INSTRUCTION SHEET
  • Long-lasting Bond Strength: It forms a strong and stable permanent bond that should last for ages.Once cured, Metal cast iron magic repair glue forms a strong and stable permanent bond, which should be used for many years.It can be shaped, tapped, filed, sanded and drilled depending on its purpose.
  • High-Temperature Resistance: A+B When fully cured, repair glue can withstand temperatures up to 160°C.it is as hard as iron and provides uniform bond line thickness.
  • Surface Application: Before using the glue, clean and drying the surface and your work should be complete within 20 minutes after mixing.Mainly used for iron and steel casting, sand holes and pores,Also can be used to repair fuel tanks, plumbing, concrete breaks, and a whole lot more
  • Simple to Use: The preparation and application are simple and easy, just mix ab glue in 1:1, Apply to the surface and give it 4-6 hours for full curing. can be sanded , drilled after curing
Bestseller No. 9
J-B Weld 37901 ExtremeHeat High Temperature Resistant Metallic Paste - 3 oz
  • Jb Weld Extreme Heat: Is Formulated For Repairs To Iron, Steel And Metal In High Temperature Environments 1000°F / 537°C. Non-Flammable, It Contains No Solvents Or Volatile Organic Compounds (Vocs).
  • The Original Cold Weld: Jb Weld Was Developed As An Alternative To Torch Welding. Designed To Be Effective In Extreme Environments, Once It Sets, It Creates A Permanent Bond Stronger Than Steel.
  • Simple To Use: When Fully Cured, This Metallic Compound Can Be Drilled, Machined Or Sanded. It Is Great For Repairing Cracks, Small Gaps, Seam Connections Or Holes.
  • Versatile & Dependable: Ideal For Repair Work On : Exhaust Manifolds, Pipe Connections, Mufflers, Catalytic Converters, Outdoor Grills, Fire Boxes, Gas And Commercial Furnaces And Water Heaters.
Bestseller No. 10
VICPRICME 1.76 oz Metal Epoxy Glue, 2 Part Heavy Duty Cold Welding Glue for Metal to Metal, Metal to Plastic, Metal to Ceramic, Best Glue Auto Repair Putty, Marine Filler (1 pcs)
  • 【𝐢𝐧𝐟𝐨𝐫𝐦𝐚𝐭𝐢𝐨𝐧】1.76oz 2 parts 5 minutes setting epoxy glue (with pusher and stirrer), non-toxic and non-irritating smell, fixed pusher setting ratio (1:1), can be used to repair all kinds of metal, plastic, rubber, wood and other objects.
  • 【𝐚𝐭𝐭𝐫𝐢𝐛𝐮𝐭𝐞】 5 minutes to set 24 hours fully cured, cured gray, can be drilled, filed, sanded, and painted, strength up to 4680psi, forming a durable, metallic toughness of the bond, can be stable between -65 ℃ ~ 287 ℃, not afraid of acid, chemical, seawater and wind, and sunshine
  • 【𝐜𝐚𝐧 𝐝𝐨】 It can simultaneously bond a variety of materials, such as metal, plastic, rubber, wood, PVC, glass, aluminum, stainless steel, with high strength, and vibration resistance, making it often used in automotive repair, ship repair special glue, the ultimate cost performance makes it widely used in everyday home repairs, such as fence welding, flower bed repair, door sign bonding, bicycle, motorcycle repair, repairing cracks in cast metal parts or porous leakage
  • 【𝐰𝐡𝐲 𝐦𝐮𝐬𝐭 𝐢𝐭 𝐛𝐞】 The extreme cost-effectiveness and excellent properties allow you to restore the item to its original effect with minimum cost and is extremely stable and once cured, will have very high strength. Non-toxic, non-irritating odor, fixed pusher operation, precise and hygienic.
  • 【𝐇𝐨𝐰 𝐭𝐨 𝐮𝐬𝐞 𝐢𝐭】Use the pusher to push out the appropriate amount of glue on a flat surface, use the stirrer to mix it evenly (usually 5 minutes), then apply the mixture to the clean surface of the material to be bonded, place the parts to be welded in the appropriate position as needed, and leave it horizontally for 24 hours! (For pressurized items, it is necessary to wait until they are completely solid before use)

Last update on 2022-11-28 / Affiliate links / Images from Amazon Product Advertising API

How to find the best cold weld?

Here, we’ll be going over a number of factors that you can use to ensure that you’re purchasing the best cold weld for you.

Regardless of which type of item you’re looking to buy, chances are that there are existing buying guides on the internet, all of which aim to give you good cold weld recommendations.

Despite these recommendations, however, it’s always a good idea to do your own research. In addition to this research, asking yourself the following questions is also super helpful:

  • What features does the cold weld need to have to be perfect for my needs?
  • What is my budget?
  • Do I need to purchase a certain brand?

Once you’ve answered these questions and have a good idea of what you’re looking for and the buying process becomes much easier. Keep in mind that when looking for the best product, there’s no need to rush. In fact, very rarely are the ideal products found by choosing the first one you see or by basing your decisions on only one factor. Take your time and enjoy the process!

Now, with the answers to the previous questions in mind, we urge you to use our upcoming buying guide for cold weld to find what you’re looking for:

Brand

In some cases, the brand of cold weld is very important. For example, if you’re looking for an item that works in tandem with another, you might very well need both products to be the same brand. If this is the case, it’s vital to pay attention to this factor, as choosing the wrong product can mean the difference between wasting your money and buying a great product that functions as it should.

Features

The features in any given cold weld are important because they can dictate which version of an item you need and how much money you need to spend. Consider all the key features that you want your item to have and don’t settle for anything that doesn’t check at least ¾ of your boxes.

Reviews

Customer reviews about cold weld are crucial – especially when you’re buying a product that costs a lot of money or serves a big importance. Luckily, most products can be found online, which means that it’s common for there to be scores of customer reviews from those who have already purchased any given product.

Pay attention to these reviews. Take note of the pros and cons that they mention, and factor these into your big decision. In some cases, you’ll be forced to sacrifice one con in order to gain a particular pro, but being aware of the potential con is going to be beneficial in either case.

Quality

Of course, quality is key. You don’t want to purchase a low-quality product. If you do, you run the risk of your item breaking, not working properly, or otherwise proving to be very disappointing, as well as a waste of money.

You can compare cold weld quality by researching what your potential purchases are made from, contrasting the individual items against each other to discern which one is made of the best materials.

Warranty

Warranty isn’t always going to be important, but it definitely can be. This is especially true if the item in question is tech-related or expensive. A good warranty will be valid for an extended time after purchase and cover a variety of problems ranging from item defects to random accidents, water damage, and other miscellaneous events that could ruin your product.

Conclusion

The quest to find the best cold weld can be daunting – but it doesn’t have to be. It can be made much easier by asking yourself a few simple questions and then thinking critically about the items you want to buy. Consider their features, quality, brand, warranty, and customer reviews and you’re more likely to make a great purchase.