Best Cheap Subwoofers For Cars in 2022 (Review & Buying Guide)

Sometimes it might be quite difficult to find the best cheap subwoofers for cars. With every niche market offering so many different products, it makes sense that this is the case.

Unfortunately, this very fact can make it incredibly difficult to find the item that best suits your needs, which is why we’ve put together this cheap subwoofers for cars buying guide.

We Recommend:

10 Best Cheap Subwoofers For Cars Reviews:

Bestseller No. 1
Skar Audio Single 8" Complete 700 Watt SDR Series Subwoofer Bass Package - Includes Loaded Enclosure with Amplifier
  • All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
  • Peak Power: 700 Watts | RMS Power: 350 Watts
  • Includes x1 Skar Audio SDR-1X8D2 Single 8" Loaded 700 Watt Vented Subwoofer Enclosure
  • Includes x1 Skar Audio SKAR4ANL-CCA 4 Gauge Complete Amplifier Wiring Kit
  • High Performance Aftermarket Subwoofer System | Easy to Install
Bestseller No. 2
PRORECK PR-122M Complete 1500W Dual 12" Car Subwoofer, Includes Loaded Enclosure with Mono Block Amplifier,Wiring Installation Kit
  • Package Includes: (1) PRORECK PR-1500.1M 1500W Amplifier, (1) dual 12" Car Subwoofer, (1) Complete Amp Installation Wire Kit.
  • PRORECK PR-1500.1M Dual 12” Car Subwoofer enclosure system with matching mono block amplifier. 1500 watts peak power/ 400 watts RMS. The surface is high quality aviation grade tweed carpet and has embroidery. The angle is 15%, close to the perfect vehicle bass alignment. Frequency Response: 15Hz - 20kHz. Power Output: 200 Watts RMS Mono-block at 4 Ohms and 1% THD+N. 4-Ohm Mono-Block Class A/B. Dynamic Power: 400 Watts @ 2 Ohms.
  • This system includes a top-level Enclosure with more powerful and rich bass. It also includes a mono block bass amplifier. This mono amplifier is built just for loud bass.It feature high power 1.5" aluminum 4-layer voice coils with bumped and vented magnet motor structures among other features. It has efficient bass response with deep and clean sound.
  • Amplifier with full range RCA output, RCA line input, high level input, bass EQ, dashboard remote, etc, meet all your needs.And amplifier contains mute circuit, bass optimization circuit, protection circuit, thermal protection, speaker short circuit protection, input overload protection and DC offset protection,make users have a better experience. Rich wire set, can meet your complete needs.
  • Wiring Kit Features:(1)High Grade Twisted Pair 100% Copper RCA Cables,(1)Blue Super Flex Power Cable,(1)Black Ground Wire,(1)Black Remote Cable and (1)Remote control,(1)Black Split Tube,(1)Speaker Wire,(1)Gold Plated ANL Heat Resistant Fuse Holder,(1)30 Amp ANL Gold Plated Fuse.Accessories: Wire ties, ring terminals, butt connectors, spades and grommet. Amplifier dimensions: 11 x 9.1 x 1.9 inches (L x W x H) Subwoofer dimensions: 28.7 x 14.2 x 15.7 inches (L x W x H)
SaleBestseller No. 3
Pioneer TS-WX1210AM 12” 1300 Max Power with Built-in Amplifier - Active Ported Pre-Loaded Enclosure Subwoofer
  • 1300 W Max Power (350 W Nominal) Pre-loaded 12" Injection Molded Polypropylene (IMPP) Composite Cone Construction Subwoofer
  • Built-in 300 W Max (150 W RMS) Class D amplifier
  • Ported enclosure design for powerful, deep and accurate bass response
  • Variable Bass Boost (0 to +12 dB, 20Hz to 130Hz)
SaleBestseller No. 4
BOSS Audio Systems PF1800 4 Channel Car Amplifier - 1800 Watts, Full Range, Class A-B, 2-4 Ohm Stable, Mosfet Power Supply, Bridgeable
  • Power - 450 Watts Max x 4 @2-Ohms, 225 Watts Max x 4 @4-Ohms, 900 Watts Max x 2 Bridged @4 Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
  • Mosfet Power Supply - A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
Bestseller No. 5
Skar Audio Dual 10" Complete 2,400 Watt SDR Series Subwoofer Bass Package - Includes Loaded Enclosure with Amplifier
  • All-in-One Complete SDR Series Dual 10-inch Loaded Subwoofer Complete Bass Package
  • Peak Power: 2,400 Watts | RMS Power: 1,200 Watts
  • Includes x1 Skar Audio SDR-2X10D4 Dual 10" Loaded 2,400 Watt Vented Subwoofer Enclosure
  • Includes x1 Skar Audio RP-1200.1D Class D 1,200 Watt Monoblock Car Subwoofer Amplifier
  • Includes x1 Skar Audio SKAR4ANL-OFC 4 Gauge Premium OFC Complete Amplifier Wiring Kit
Bestseller No. 6
Rockville RVB10.1A 10 Inch 500W Active Powered Car Subwoofer+Sub Enclosure Box
  • Rockville RBV10. 1A Single 10” 500 Watts Active Subwoofer Enclosure, Size: 10”, Peak Power: 500 Watts, RMS Power: 300 Watts, Nominal Impedance: Single 4-Ohm, 1. 5” Voice Coil, Inverted Carbon Graphite Molded Dust Cap, Kevlar Reinforced Pulp Cone, Double Lami
  • Frequency Response: 35Hz - 200Hz, Sensitivity: 88dB, Anti-Vibration Braced MDF Cabinet, Angled Back Fits Perfectly Against Rear Seats, Computer Tuned Bass Reflex Port, Blue/Black Aviation Grade Tweed Carpet with Embroidered Rockville Logo.
  • Class AB Amplifier, High Speed MOSFET Power Supply, High Level Speaker Inputs, Low Level RCA Inputs, Built-In Low Pass Crossover (30Hz - 160Hz).
  • Accepts up to 8 Gauge Wire, 100mV - 5V Input Voltage, Power (Blue) & Diagnostic (Red) LED Indicators, 20A Fuse, Dimensions in inches: Length 15. 75" x height: 12. 99" x top width 10. 63" x bottom width: 14. 17", Weight: 22. 59 lbs.
Bestseller No. 7
Skar Audio Triple 8" Complete 2,100 Watt SDR Series Subwoofer Bass Package - Includes Loaded Enclosure with Amplifier
  • All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
  • Peak Power: 2,100 Watts | RMS Power: 1,050 Watts
  • Includes x1 Skar Audio SDR-3X8D2 Triple 8" Loaded 2,100 Watt Vented Subwoofer Enclosure
  • Includes x1 Skar Audio SKAR4ANL-OFC 4 Gauge Premium OFC Complete Amplifier Wiring Kit
  • High Performance Aftermarket Subwoofer System | Easy to Install
SaleBestseller No. 8
BOSS Audio Systems CUBE10 Car Subwoofer and Amp Package – Built-in Amplifier, 10 Inch Subwoofer with Passive Radiator, Remote Subwoofer Control
  • Built-in Amplifier - A built-in 600 Max watt amplifier powers the 10” subwoofer
  • Passive Radiator – A driver unit that has its motor structure (magnet) removed, becomes a passive diaphragm. As a result, there is no Chuffing that you would generally get with a ported box, thus enriching the BASS & making the system more linear
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the CUBE10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Phase Control - Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up “out of phase”
Bestseller No. 9
Rockville K5 W12K5S2 12" 1400w 2 Ohm Car Audio Subwoofer Sub 350w RMS CEA Rated!
  • Features: Rockville W12K5S2 K5 Series 12" 2-Ohm Car Subwoofer, Peak Power Handling: 1400 Watts, Program Power Handling: 700 Watts, CEA Rated RMS Power Handling: 350 Watts, 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire, The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire, 50 Oz High Quality Magnet, Cast Iron Basket With Black Sanded Finish
  • Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone – This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it, Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion, Blue Stitching Cone Reinforcement Ensures Long Life, Paper Dustcap is light weight and efficient helping the sub to play louder even if your amp is not so powerful
  • Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire, Impedance: Single 2-Ohm Voice Coil, Vented Hole on T-yoke Enhances Heat Dissipation, Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet, Mounting Gasket with Rockville branding looks great and Makes it Easy To Mount the Subwoofer Air-Tight, High BL Magnetic Motor Gap
  • We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated, Cutout Diameter: 11.02” inches, Mounting Depth: 5.03” inches, Frequency Response: 25 Hz - 1.5K kHz, 6mm T-Yoke + 6mm Washer, Sensitivity: 88dB, Sealed Enclosure Volume: 0.8 – 1.3 Cubic Feet, Vented/Ported Enclosure Volume: 1.3 – 2.0 Cubic Feet, Weight: 10.1 Lbs., Shipping Weight: 11.6 Lbs., Shipping Box Dimensions: 13.78" x 13.78" x 8.97" Inches
  • Detailed Info: Body: Non-Pressed Paper, Gap Plate Inside Diameter: 80mm (3.14 inches), Gap Plate Outside Diameter: 156mm (6.14 inches), Gap Plate Thickness: 25mm (0.98 inches), Yoke Outside Diameter: 145mm (5.7 inches), Yoke Thickness: 6mm (0.23 inches), Yoke Pole Diameter: 50mm (2 inches)
Bestseller No. 10
Rockville RV12.2B 1200W Dual 12" Car Subwoofer Enclosure+Mono Amplifier+Amp Kit
  • Rockville RV12.2B 1200W dual 12" Car Subwoofer Enclosure amplifier+amp kit
  • Rockville RV12.2B Dual 12” bass enclosure system with matching mono block amplifier. 1200 watts peak power/ 400 watts RMS cea-2031 rating. Dual 12” bass enclosure system with matching mono block amplifier. Quasi transmission Line cabinet design.
  • Angled at 15% for near perfect in vehicle bass alignment. Exterior: high quality aviation grade tweed Carpet. Oversize Rockville Shield embroidery. Mono, Gold-plated push style, speaker terminal. Dual, high-power, high-efficiency 12" Subwoofers.
  • 1200 watts peak power. Power output: 200 watts RMS cea-2006 power @ 4-Ohm and 97DBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20Khz (-3Db). RMS power: 400 watts @ 2 ohms. 4 ohm mono-block class A/B.
  • 17" High grade twisted pair 100% Copper RCA cables. 17' 8 gauge translucent Blue Super flex Power cable. 3' 8 gauge clear super flex ground wire. 17' 18 gauge Blue remote cable. 17' 16 gauge speaker wire. Gold Plated anl heat resistant fuse holder

Last update on 2022-12-04 / Affiliate links / Images from Amazon Product Advertising API

How to find the best cheap subwoofers for cars?

Here, we’ll be going over a number of factors that you can use to ensure that you’re purchasing the best cheap subwoofers for cars for you.

Regardless of which type of item you’re looking to buy, chances are that there are existing buying guides on the internet, all of which aim to give you good cheap subwoofers for cars recommendations.

Despite these recommendations, however, it’s always a good idea to do your own research. In addition to this research, asking yourself the following questions is also super helpful:

  • What features does the cheap subwoofers for cars need to have to be perfect for my needs?
  • What is my budget?
  • Do I need to purchase a certain brand?

Once you’ve answered these questions and have a good idea of what you’re looking for and the buying process becomes much easier. Keep in mind that when looking for the best product, there’s no need to rush. In fact, very rarely are the ideal products found by choosing the first one you see or by basing your decisions on only one factor. Take your time and enjoy the process!

Now, with the answers to the previous questions in mind, we urge you to use our upcoming buying guide for cheap subwoofers for cars to find what you’re looking for:

Brand

In some cases, the brand of cheap subwoofers for cars is very important. For example, if you’re looking for an item that works in tandem with another, you might very well need both products to be the same brand. If this is the case, it’s vital to pay attention to this factor, as choosing the wrong product can mean the difference between wasting your money and buying a great product that functions as it should.

Features

The features in any given cheap subwoofers for cars are important because they can dictate which version of an item you need and how much money you need to spend. Consider all the key features that you want your item to have and don’t settle for anything that doesn’t check at least ¾ of your boxes.

Reviews

Customer reviews about cheap subwoofers for cars are crucial – especially when you’re buying a product that costs a lot of money or serves a big importance. Luckily, most products can be found online, which means that it’s common for there to be scores of customer reviews from those who have already purchased any given product.

Pay attention to these reviews. Take note of the pros and cons that they mention, and factor these into your big decision. In some cases, you’ll be forced to sacrifice one con in order to gain a particular pro, but being aware of the potential con is going to be beneficial in either case.

Quality

Of course, quality is key. You don’t want to purchase a low-quality product. If you do, you run the risk of your item breaking, not working properly, or otherwise proving to be very disappointing, as well as a waste of money.

You can compare cheap subwoofers for cars quality by researching what your potential purchases are made from, contrasting the individual items against each other to discern which one is made of the best materials.

Warranty

Warranty isn’t always going to be important, but it definitely can be. This is especially true if the item in question is tech-related or expensive. A good warranty will be valid for an extended time after purchase and cover a variety of problems ranging from item defects to random accidents, water damage, and other miscellaneous events that could ruin your product.

Conclusion

The quest to find the best cheap subwoofers for cars can be daunting – but it doesn’t have to be. It can be made much easier by asking yourself a few simple questions and then thinking critically about the items you want to buy. Consider their features, quality, brand, warranty, and customer reviews and you’re more likely to make a great purchase.