Our Top 10 Picks:
The 10 Best Car Speakers For Bass Reviews:
- All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
- Peak Power: 2,100 Watts | RMS Power: 1,050 Watts
- Includes x1 Skar Audio SDR-3X8D2 Triple 8" Loaded 2,100 Watt Vented Subwoofer Enclosure
- Includes x1 Skar Audio SKAR4ANL-OFC 4 Gauge Premium OFC Complete Amplifier Wiring Kit
- High Performance Aftermarket Subwoofer System | Easy to Install
- Diameter: 15" Massive 4" high temp voice coil
- RMS Power Handling: 2500 Watts - Dual 2 OHMS -Nominal Power Handling: 5000 Watts
- Voice Coil: DVC - Type: Black Coil
- Sensitivity: 87.2 dB - Mounting depth: 12"
- Sold Individually
- High density and high quality construction
- Phase shift to compensate for time alignment problem in the system
- Auto power on/ off for high level connection
- Low pass filter controls the frequency range
- Bass boost increases the sound level / Power status LED bi-color LED
- BUILT-IN AMPLIFIER: A built-in 1200 Max watt amplifier powers the subwoofer
- PULSE WIDTH MODULATED: This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- 3000 WATT POWER: This 15 inch car subwoofer has 3000 Watt peak power that will produce high sound resonance. It also has a 240oz heavy triple stacked magnet structure and dual 4 Ohm impedance voice coils to give you an experience like never before.
- HIGH QUALITY BUILT: This American bass competition car subwoofer is a clean cut car stereo subwoofer with an extra element of strength to it. This subwoofer has a Kevlar fiber added non-press paper cone with texture finish. So you enjoy your car stereo subwoofer performance without any worries for the unit. This car audio subwoofer enhances the overall performance of your car stereo system.
- 8.3” MOUNTING DEPTH: This car subwoofer comes with an easy to install 8.3” mounting depth. As a result, this car audio stereo subwoofer fits most audio system for cars, boats or RVs. The essential cables are already included along with a manual to how to install this 15-inch car subwoofer.
- QUALITY TESTED AND CUSTOMER ACCLAIMED | This American Bass car subwoofer is rated at 3000 Watts peak and has a proven SPL of 88dB. Each of the American Bass competition car audio subwoofer goes through an extensive quality control process to ensure the quality, performance and reliability to ensure maximum customer satisfaction.
- DUAL 4 OHM IMPEDANCE: The car stereo subwoofer has a dual 4 ohm impedance rating and a 3” 4-layer coated copper wire voice coil. This deals with the issue of undersized wires found in many cars today. As a result, this subwoofer gives an optimal output with minimal distortion and enables you to enjoy a crisp and clear sound thus enhancing your car audio stereo system.
- Excellent for voice as well as bass
- 1 ohm
- 10500 watts
- Mono
- Bass bosst
- Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- This listing includes: (2) XFL-12-D4 12" Subwoofer
- RMS: 1000W Per Woofer MAX: 3000W Per Woofer
- Impedance: Dual 4 Ohm Sensitivity: 89.6
- Magnet Type: Ferrite Basket Type: Cast
- Mounting Depth: 8.34" Baffle Cutout: 11.4" Diameter: 13"
- The APP122 Dual 12” bass package comes with EVERYTHING INCLUDED! 2 Subwoofers in Ported Enclosure | Monoblock Amplifier with Bass Knob | Complete Amplifier Wiring Kit | With a power handling capacity of 1500 Watts Max (500 Watts RMS), this is all you need!
- Mono Block amplifier features a thermal protection circuit, nickel plated terminal blocks, powder coated chassis, comes with a THD level of 0.2%, and a bass boost control to connect near the driver for optimum loudness control.
- The amplifiers built-in protection circuitry protects your system from input overload, short circuit, and high temperatures. When protection mode is enabled, the LED indicator on the side panel will illuminate.
- Our professional installation 8 AWG amp kit provides a 17’ power cable, 3’ ground cable, 17’ remote turn on wire, 17’ RCA cable, ATC fuse, and accessory wire-ties.
- The ported enclosure is constructed of MDF (Medium-density fiberboard) with black carpet measured at 13.75” high, 29.5” wide, and a depth of 13.5” bottom/9” top.
Last update on 2023-03-28 / Affiliate links / Images from Amazon Product Advertising API