Quick Picks:
15 Top Car Soundproofing Material Reviews:
- The cost effective 50 mil (1.3 mm) automotive butyl and foil sound deadening! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
- Now everyone can easily eliminate the annoying road noise in the vehicle. We've designed the product that pretty efficiently handles the rattle and reduces noise while being affordable to almost everyone. KILMAT would deaden the entire car for the same money that would be enough to only insulate the doors using the expensive brands material.
- Automotive self-adhesive insulation consists of butyl. KILMAT sound deadening has a total weight of 0.35 lbs/1sqft (1.75 kg/1 sqm). This weight ensures optimum efficiency and sound insulation that could be possibly gained from 50 mil (1.3 mm) thickness material. KILMAT 50 mil (1.3 mm) is light weighted sound deadening material!
- Car insulation KILMAT has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you'll be 100% sure that the soundproofing is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
- Sound deadening material specifications: Nominal thickness 50 mil (1.3 mm); Total coverage area of 50 sq.feet (4.7 sqm); Number of sheets in the stack 47; Nominal sheet Size 9.8x15.7 inch (250x 400 mm). Roller is not included.
- Closed Cell Foam: OIL and Waterproof LINER closed-cell polyethylene foam is the best for car, Siless with an adhesive layer 100% ensures optimum efficiency and thermal insulation that could be possibly gained. The price of 1 sqft of Siless Liner with similar characteristics is more then three times cheaper! Excellent quality for less money!!
- Heat Blocker and Vibration Deadener: Effectively blocks 98% of radiant heat transfer. Siless Liner is a very versatile insulation material with excellent thermal barrier properties that will block engine, exhaust, & summer heat, ensure your vehicle stays cooler in the summer and warmer in the winter, making your ride more pleasant!
- Lightweight, Waterproof: It is a waterproof light-weight thermal deadener with highly compressible closed cell foam formulation, it absolutely doesn’t absorb moisture and has no odor, and it’s flexible which make it easy to install with or without roller.
- The operating temperature of the material is the same as of the rubber foam up to 215 degrees Fahrenheit.
- SILESS Liner specifications: Self-adhesive foam rolls (closed cell PE foam) with waterproof glue. Thickness 157 mil / 0.157 inches / 4mm. Number of rolls in the package - 1. Total coverage area - 36 ft². Each roll size - 15.74 x 330.7 inches.
- Sound deadening material specifications: Total coverage area of 8.61 sqft; Nominal sheet Size 15,7x9.8 inch; Number of sheets in the stack 8: Nominal thickness 197 mil:Material: PE Foam + Aluminum Foil Finsh | Working Temperature Range: -40°C ~ +149°C
- Now everyone can easily eliminate the annoying road noise in the vehicle. We've designed car sound deadening material that pretty efficiently handles the rattle and reduces noise
- Strong sound insulation and absorption performance. 100% New heat shield Car Sound Deadener, PE with aluminum material, Thickness: 5 mm. for creating a quieter and more comfortable in-car experience
- It is a waterproof light-weight thermal deadener with highly compressible closed cell foam formulation, with excellent thermal barrier properties that will block engine, exhaust, & summer heat, ensure your vehicle stays cooler in the summer and warmer in the winter, making your ride more pleasant
- Easy to cut and install, suitable for various car models. Self-adhesive backing waterproof and dustproof and have strong adhesion. The size of each sheet is 15,7x9.8 inch, which can be better spliced and installed, and can effectively prevent creases
- ★ Siless VIBRO 80 mil is ultimate quality sound deadening insulation. Designed for the automotive industry as an industrial sound damping material for applications that need extreme performance, it is well suited to the demanding car enthusiast as well.
- ★ Advanced Formulation - SILESS VIBRO Damping Material consists of newly invented Bmastic, technologically most advanced and efficient sound deadening composition on the market today.
- ★ Value - SILESS VIBRO Damping Material is just priced to be cost effective, when compared to similar products on the market. Car soundproofing does not have to be expensive to work!!
- ★ Ease of Installation — SILESS VIBRO Damping Material is easy to install with a “peel and place” application. Simply trim the pieces to fit, peel and place and hand roll to ensure good adhesion. No messy spray-on paints or adhesives are needed to install this product.
- ★ SILESS VIBRO specs — Thickness 80 mil/ 0.08 inches/ 2mm, Coverage area – 36 ft², Number of Boxes – 1, Number of sheets in box - 14, Each sheet size - 23.6 x 15.94 inches. The installation instructions are included in the package, but a roller isn't.
- WHY TO BUY THE SOUND DEADENER MAT--The impact of car noise on car owners is manifold. It can cause headaches, tinnitus, insomnia, memory loss and fatigue. Therefore, it is necessary to make sound insulation materials for the car. SHINEHOME 150 mil automotive sound deadening material with strong self-adhesive foam, will be the excellent sound deadening dampening deadener mat, save more and play a bigger role.
- EXCELLENT QUALITY--SHINEHOME 150 mil sound insulation material has high thermal and acoustic properties,is lightweight ,no water absorption, no peculiar smell, made in special durable material for tough environments.
- MAIN FEATURE--SHINEHOME 150 mil noise and heat insulation is an automotive sound deadener mat, audio noise insulation and dampening material, with high noise reduction and excellent thermal insulation properties,with strong adhesive layer.
- PERFECT FIT--SHINEHOME 150 mil automotive self-adhesive insulation rubber foam material , is easy to cut and fit, strong adhesive backing can perfect fit for the car, its operating temperature: – 49 degrees fahrenheit to 200 degrees fahrenheit, such an excellent noise insulator properties will be the choice for your life.
- SPECIFICATIONS& APPLICATION--The waterproof soundproofing foam panel is 15.7x9.8 inch per sheet, coverage area 36sqft, thickness 150 mil, number of sheets 34, the temperature up to 190 degrees Fahrenheit.
- ★ Siless VIBRO 80 mil is ultimate quality sound deadening insulation. Designed for the automotive industry as an industrial sound damping material for applications that need extreme performance, it is well suited to the demanding car enthusiast as well.
- ★ Advanced Formulation - SILESS VIBRO Damping Material consists of newly invented Bmastic, technologically most advanced and efficient sound deadening composition on the market today.
- ★ Value - SILESS VIBRO Damping Material is just under $1.64 per sqft, priced to be cost effective, when compared to similar products on the market. Car soundproofing does not have to be expensive to work!!
- ★ Ease of Installation — SILESS VIBRO Damping Material is easy to install with a “peel and place” application. Simply trim the pieces to fit, peel and place and hand roll to ensure good adhesion. No messy spray-on paints or adhesives are needed to install this product.
- ★ SILESS VIBRO specs — Thickness 80 mil/ 0.08 inches/ 2mm, Coverage area – 36 ft², Number of Boxes – 1, Number of sheets in box - 14, Each sheet size - 23.6 x 15.94 inches. The installation instructions are included in the package, but a roller isn't. PLEASE NOTE: Siless Branded logo on the front is optional, some batches could have it and some not.
- Each Sheet size = 500mm x 300mm, Thickness = 12mm (1/2")
- Fire Retardant FMVSS302, Temperature Range = -60°C > +160°C
- Self adhesive high quality liner can maintain shape under pressure yet be flexible enough to trim easily in many areas of the vehicle.
- Sold as Carton of 1 Sheets, Pack Coverage = 0.15sq.m / 1.61sq.ft
- Our 455 MIL - 1/2" self-adhesive closed cell foam material is easy to cut, 100% waterproof and our sheet size 19.6" x 11.8" is easier to install
- ★ Siless VIBRO 50 mil is ultimate quality sound deadening insulation. Designed for the automotive industry as an industrial sound damping material for applications that need extreme performance, it is well suited to the demanding car enthusiast as well.
- ★ Advanced Formulation - SILESS VIBRO Damping Material consists of newly invented Bmastic, technologically most advanced and efficient sound deadening composition on the market today.
- ★ Value - SILESS VIBRO Damping Material is just priced to be cost effective, when compared to similar products on the market. Car soundproofing does not have to be expensive to work!!
- ★ Ease of Installation — SILESS VIBRO Damping Material is easy to install with a “peel and place” application. Simply trim the pieces to fit, peel and place and hand roll to ensure good adhesion. No messy spray-on paints or adhesives are needed to install this product.
- ★ SILESS VIBRO specifications — Thickness 50 mil, Coverage area 52 sqft, Number of sheets in the box 20, Each sheet size 23.6x15.94 inch. Installation instruction is included in the box. Please note: Siless Branded logo on the front is optional, some batches could have it and some not.
- Wave Sound Deadener Liner has the same characteristics and excellent noise insulator properties as rubber foam. It absolutely doesn't absorb water & has no odor unlike polyurethane foam. It has a very low weight, oil and petrol resistant.
- The material used is an excellent insulator! The sound deadener material allows you to deal with both, cold and the heat. This is especially important in hot climate areas. Well-insulated interior is a pledge of high comfort while in vehicle. Liner heat shield material will solve the problem of excessive heating if your car is equipped with a powerful engine and enhanced exhaust system. It is also easy to use Liner as the hood insulation (hoodliner).
- Placement of using sound deadener mat:A.Hood B.Celling C.Door D.Cockpit Floor E.Tailgate F.Firwall and U Type Wall J.Front Fender H.Front and Back Wheels
- 1.Moistureproof 2.Superb backed self adhesive 3.Easy to install/handle/cut flexible Perfect for Automobiles, Condos, Apartments, Studios, Classrooms, Factory and more
- Size:About 400mm*1000mm*20mm 15.7"x39.4" 4.3sqft Raw Material:High Quality foam rubber Function:Soundproof Stick:Best Self-adhesive Type:Car Deadening Material: Insulating fiber &Sound insulation cotton
- Lightweight Sofe Muffler Cotton Excellent for sealing against water and air ingress. It has a very low weight, oil and petrol resistant.
- The material used is an excellent insulator! The sound deadener material allows you to deal with both, cold and the heat. This is especially important in hot climate areas. Well-insulated interior is a pledge of high comfort while in vehicle. Liner heat shield material will solve the problem of excessive heating if your car is equipped with a powerful engine and enhanced exhaust system. It is also easy to use Liner as the hood insulation (hoodliner).
- Placement of using sound deadener mat:A.Hood B.Celling C.Door D.Cockpit Floor E.Tailgate F.Firwall and U Type Wall J.Front fen-der H.Front and Back Wheels
- 1.Waterproof and moistureproof 2.Superb backed self adhesive 3.Easy to install/handle/cut flexible
- Perfect for Automobiles, Condos, Apartments, Studios, Classrooms, Factory and more
- 【SPECIFICATION】: SIZE: 19''(L)X 16''(W) X 0.7''(H); Pack of 1; Coverage: 2.1 square feet; WEIGHT: 1.9 lbs per panel; High density triple-layer sound dampening material; With self-adhesive backing
- 【TRIPLE INSULATION】: One eggcrate closed cell foam layer for noise and thermal insulation & one heat reflective aluminum foil sheet & one self-adhesive butyl rubber layer for vibration isolation. Compared with normal foams, this 3-layer foam panel can control sound and vibration much better than even those thicker ones do due to its unique acoustical structure
- 【HEAT INSULATION & WATERPROOF】: Closed cell foam has a higher R-value than open cell foam, thus can better at keeping heat in or out of a structure. It is also waterproof and unharmed by water damage
- 【ENDLESS-APPLICATION & ECO-FRIENDLY】: The sound blanket is flame retardant (B1 Class), flexible, odorless, and non-toxic. Perfect for recording studio, home theater, office, hvac, automotive, ceiling, door, floor, etc.
- 【QUICK INSTALLATION】: This sound deadener have strong self-adhesive backing and is easy to cut. It can be used both indoors and outdoors. Please note it doesn't stick to dusty or uneven surfaces. To mount on untreated walls and ceilings, it is highly recommended to use construction adhesive (sold separately)
- The most popular sound and vibro deadening material in the world. Over 25 years in sound proofing automotive industry. 0.87$ per 1 sqft is the lowest price for really workable sound deadener.
- Use the best automotive sound deadener for your car and install on your own. Very easy to use Standartplast products. Perfect for DIY, comes with strong adhesive paper. For door and trunk treatment.
- Use the best automotive sound deadener for your car and install it on your own. It is very easy to use Standartplast products. Perfect for DIY, comes with strong adhesive paper.
- Standartplast products are used for car makers and automotive factories. For best price you get the quality of sound deadeners for General Motors, Ford, VW Group, Nissan etc.
- Our products are used by winners in car-audio competitions, such as dB Drag, IASCA, EMMA etc. Truck, Muscle, Restorated and Sport cars owners choose Standartplast sound insulation materials all over the world!
- Sound deadening material specifications: Total coverage area of 10.76 sqft; Nominal sheet Size 40x40 inch; Nominal thickness 197 mil:Material: PE Foam + Aluminum Foil Finsh | Working Temperature Range: -40°C ~ +149°
- Now everyone can easily eliminate the annoying road noise in the vehicle. We've designed car sound deadening material that pretty efficiently handles the rattle and reduces noise
- Strong sound insulation and absorption performance. 100% New heat shield Car Sound Deadener, PE with aluminum material, Thickness: 5 mm. for creating a quieter and more comfortable in-car experience
- It is a waterproof light-weight thermal deadener with highly compressible closed cell foam formulation, with excellent thermal barrier properties that will block engine, exhaust, & summer heat, ensure your vehicle stays cooler in the summer and warmer in the winter, making your ride more pleasant
- Easy to cut and install, suitable for various car models. Self-adhesive backing waterproof and dustproof and have strong adhesion
- ★Insonorizzante mats (closed cell PE foam) with waterproof glue. Thickness 394 mil / 10mm. Pack of 15(single piece 1.09 sqft). Total coverage area - 16.3 ft², working Temperature Range: -40°F ~ 300°F
- ★Sound deadening mat is an insulating material with a highly compressible closed-cell foam formula. Effectively blocks 98% of radiant heat transfer, will block engine, exhaust and summer heat, ensure your vehicle stays cooler, reduce the energy consumption of car air conditioners, so as to achieve the goal of fuel saving
- ★Sound deadener pad has excellent sound insulation and vibration absorption performance, reduces external noise, creates a comfortable driving environment, suppresses engine vibration, reduces internal vibration, and extends the life of parts
- ★Sound dampener liner has waterproof Aluminum surface, it absolutely moistureproof and has no odor, isolate most liquids on the surface and wipe dry easily, scratch resistant
- ★Sound dampening mat can be applied to external partitions, firewalls, hoods, engine compartments, engine compartments, trunks, wheel arches, body panels, load floors, and internal partitions under the seat floor. It has excellent load resistance, so it is the best choice for flooring. Easy to cut and install, self-adhesive backing waterproof and dustproof and have strong adhesion
- Car sound deadener (10-piece) for creating a quieter and more comfortable in-car experience
- Sound-proofing material (made of butyl rubber compound based substrate) helps reduce annoying vibrations and noises from the vehicle and road
- Strong self-adhesive backing for secure placement; reflective aluminum foil on the front for better thermal insulation
- Pliable material; easy to cut and install in a vehicle interior, cabin floor, or trunk; installation kit includes instructions
- Each piece measures 14.5 by 10 inches; 10-square-foot total coverage area; backed by an Amazon Basics 1-year limited warranty
Last update on 2023-01-12 / Affiliate links / Images from Amazon Product Advertising API