Our 20 Recommendations:
20 Best Car Racing Helmet Reviews:
- Lightweight fiberglass composite shell construction
- Fire retardant padded interior and airflow venting for comfort
- Protective, soft carry bag included
- 3mm Anti-scratch, flame resistant shield with tear off posts
- Snell SA2020 Certified, IMPORTANT: This helmet is manufactured for automobile racing and is not designed for use on public streets, roads, or highways. This helmet meets all requirements of Federal Motor Vehicle Standard (FMVSS) 218.
- Ultra-lightweight carbon shell shell AND advanced multi-density, multi-piece liner to maximize energy absorption and impact performance.
- Shell and shield design optimized to improve aerodynamic performance, reduce internal noise, and enhance energy management capacities.
- Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation.
- CERTIFICATIONS: Snell SA2020 AND FIA 8859 approved.
- IN THE BOX: RS7 Carbon Helmet, Clear SE07 3mm DSAF Shield Installed, Hans Post Anchors Installed, Draw String Helmet Bag, Plastic Tearoff Posts Installed & Hex Wrench Key.
- Lightweight fiberglass shell construction
- Comfort fit, fire retardant padded interior with removable cheek pads
- Airflow venting for comfort & Kevlar chin strap
- HANS threaded inserts In shell
- Snell SA2020 Certified, IMPORTANT: This helmet is manufactured for automobile racing and is not designed for use on public streets, roads, or highways. This helmet meets all requirements of Federal Motor Vehicle Standard (FMVSS) 218.
- Snell SA2020 Certified, made of Fiber Reinforce Plastic(FRP) composite shell, Double D-ring equipped, more lightweight and higher safety.
- Compatible with HANS/HNR M6 Threaded Inserts(not included), convenient for you to install Head&Neck Support devices to protect head and neck from getting hurt when participate in auto racing sports.
- 40 MM sunshade film on the top of the visor helps to reduce giddiness and dizziness caused by the sun/light while doing car racing acclivities.
- High density Expanded Polystyrene (EPS) fire retardant inner pads enhances comfort and safety when it happens to accident.
- Tear-off posts button on the visor allows to install tear-off posts on the visor so as to ensure a clear view according to racer’s needs.
- Composite Fiberglass lightweight shell
- Minimal Forward Venting with Scalp and Exhaust vents
- Plush Fire Retardant Interior
- Z-20 Series 3mm Shield with Tear Off Posts, 12.25in Center Posts
- M6 Inserts for Head & Neck Restraints
- Fiberglass Aero shell with HANS device mount points
- Fire retardant Nomex lining, removable cheek pads
- Designed for stability with aero ridges and chin spoiler
- Front and rear top venting for improved air intake and heat exhaust
- Snell SA2020 Certified, IMPORTANT: This helmet is manufactured for automobile racing and is not designed for use on public streets, roads, or highways. This helmet meets all requirements of Federal Motor Vehicle Standard (FMVSS) 218.
- Lightweight carbon fiber composite shell construction
- Fire retardant padded interior, removable cheek pads
- Airflow venting for comfort
- 3mm Anti-scratch, flame resistant shield with tear off post
- Snell SA2020 Certified, IMPORTANT: This helmet is manufactured for automobile racing and is not designed for use on public streets, roads, or highways. This helmet meets all requirements of Federal Motor Vehicle Standard (FMVSS) 218.
- Snell SA2020 Rated (Sticker Affixed); HANS / HNR M6 Threaded Inserts In Shell; FRP Composite Shell
- Expanded Polystyrene (EPS) Liner; Comfort Fit Blended Nomex Interior; Distortion Free 3mm Polycarbonate Low Fog Shield
- Great Peripheral Vision; Silicone Eyeport Seal Keeps Out Dirt; Kevlar Chin Strap
- Fire Retardant Paint & Interior; Aluminum Pivot Kit W/Adjustable Friction Lock; Tear-Off Posts Hand Ratchet To Eight Positions
- Hook & Loop Fastened Removable Cheek Pads; Slick Aero Design With Chin Spoiler
- Ultra-lightweight carbon shell AND Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance.
- Large eyeport for enhanced visibility AND versatile ventilation system featuring lower front chin bar ventilation and upper manual lever air intake vents that can be opened and closed.
- APPLICATION: maximum versatility allowing the helmet to be used in all forms of racing. It features an ultra-lightweight carbon shell, premium interior, superior ventilation, and large eyeport for racers who require eyewear or prefer maximum visibility.
- CERTIFICATIONS: Snell SA2020 AND FIA 8859 approved.
- IN THE BOX: M8 Carbon Helmet, Clear SRV-8 Shield Installed, Manual Lever Air Intake Vents Installed, Draw String Helmet Bag, Plastic Tearoff Posts Kit, 3 Stainless Circle Grommets & Hex Wrench Key.
- 2 shells for the smallest, lightest helmet possible in your size
- DOT approved quick release chinstrap
- Lightweight, aerodynamic shell
- Hypoallergenic, removable, washable comfort padding
- DOT approved. Meets the FMVSS 218 Standard
- Snell SA2020 Certified, IMPORTANT: This helmet is for automobile racing and is not DOT Certified. It IS NOT for use on public streets, roads, or highways. RACE READY - Perfect full face helmet for auto racing including autocross, dirt track, and drag racing.
- COMFORTABLE - This Snell SA2020 racing helmet offers a plush soft lined interior and rear exhaust vents; Lightweight fiberglass composite shell
- SAFETY - Kevlar chin strap with D-ring closure; fire retardant liner materials; 3mm optically correct hard coated face shield with eyeport gaskets to keep out dust and debris. 12 3/8" tear off post distance; HANS threaded inserts in shell compatible with HANS head restraint systems
- SIZE CHART (Circumference of the largest part of your head, usually just above the eyebrows) SMALL 55-56 CM -- 21.7" to 22", MEDIUM 57-58 CM -- 22.5" to 22.8", LARGE 59-60 CM -- 23.2" to 23.6", XL 61-62 CM -- 24' to 24.5", 2XL 63-64 CM -- 24.8" to 25.2", 3XL 64-65 CM 25.2" to 25.6"
- Replacement shields avaialble here: https://www.amazon.com/dp/B0BZ137HZ2?ref=myi_title_dp. Please be aware that if you return this item for a refund your order will be refunded less the original shipping charge.
- Lightweight composite shell AND advanced multi-density, multi-piece liner to maximize energy absorption and impact performance.
- Versatile ventilation system direct flow front chin bar ventilation and upper manual lever air intake vents that can be opened and closed.
- APPLICATION: the lightweight composite shell, superior ventilation, and extended size range make the M8 a great choice for racers of all types who want a multi-purpose helmet with a wider field of vision (especially for those who wear eyeglasses) that can be used in all forms of motorsports.
- CERTIFICATION: Snell SA2020 approved.
- IN THE BOX: M8 Helmet, Clear SRV-8 Shield Installed, Manual Lever Air Intake Vents Installed, Draw String Helmet Bag, Plastic Tearoff Post Kit, 3 Stainless Circle Grommets, Hex Wrench Key.
- 3K Carbon Shell Construction
- Now with Speaker Pockets
- New Triple-Density Cheek Pads with Added Comfort Lining
- Bell ProTint Photochromic Shield Technology
- DOT approved. Meets the FMVSS 218 Standard
- Snell SA2020 Rated (Sticker Affixed); HANS / HNR M6 Threaded Inserts In Shell; FRP Composite Shell
- Expanded Polystyrene (EPS) Liner; Comfort Fit Blended Nomex Interior; Distortion Free 3mm Polycarbonate Low Fog Shield
- Great Peripheral Vision; Silicone Eyeport Seal Keeps Out Dirt; Kevlar Chin Strap
- Fire Retardant Paint & Interior; Aluminum Pivot Kit W/Adjustable Friction Lock; Tear-Off Posts Hand Ratchet To Eight Positions
- Hook & Loop Fastened Removable Cheek Pads; Slick Aero Design With Chin Spoiler
- Bell RS7C LTWT is a purpose-built helmet incorporating advanced airflow, enhanced energy management capability, and the ability to be used with or without ear cups in an ultra-lightweight configuration and delivered race-ready under 2.795 pounds.
- Advanced multi-density, multi piece liner to maximize energy absorption and impact performance. Multi-purpose fit system that can be used with or without ear cups (ear cups included)
- Shell and shield design optimized to improve aerodynamic performance, reduce internal noise, and enhance energy management capacities. Aerospace grade ultra-lightweight carbon shell. Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation
- CERTIFICATION: Snell SA2020 pproved.
- IN THE BOX: RS7C LTWT Carbon Helmet, Clear SE07 3mm DSAF Shield Installed, Hans Post Anchors Installed, Draw String Helmet Bag, Clear Air Intake, Plastic Tearoff Post Kit, Hex Wrench Key.
- Lightweight Polycarbonate/ABS Shell Construction
- Click Release Shield for fast, easy and tool-free shield replacement
- II anti-fog, anti-scratch and UV protected shield
- Padded Wind Collar drastically reduces wind and road noise
- Removable/washable interior. Contoured cheek pads. Integrated speaker pockets. Padded chin strap with D-ring closure. Industry-leading Five-year warranty
- 3 low-profile carbon composite shells and EPS sizes that are DOT certified and backed by an industry-leading five-year warranty
- Contoured cheek pads with integrated speaker pockets and removable interior
- Front chin vents with metal mesh intake and exhaust vents
- Deluxe helmet bag included
- DOT approved. Meets the FMVSS 218 Standard
- Snell SA2020 Rated (Sticker Affixed); HANS / HNR M6 Threaded Inserts In Shell; FRP Composite Shell
- Expanded Polystyrene (EPS) Liner; Comfort Fit Blended Nomex Interior; Distortion Free 3mm Polycarbonate Low Fog Shield
- Great Peripheral Vision; Silicone Eyeport Seal Keeps Out Dirt; Kevlar Chin Strap
- Fire Retardant Paint & Interior; Aluminum Pivot Kit W/Adjustable Friction Lock; Tear-Off Posts Hand Ratchet To Eight Positions
- Hook & Loop Fastened Removable Cheek Pads; Slick Aero Design With Chin Spoiler
- Built-in Twin Shield System Drop Down Sun Shield protects your eyes from the sun and retracts with the flip of a switch
- DOT approved quick release chin strap is easy to secure and easy to release
- Technical fabric liner is easily removed and washable so you can keep your helmet as fresh as the day it was new
- DOT approved. Meets the FMVSS 218 Standard
- Fit is long oval
- Optimal shell aerodynamics reduce wind noise around the helmet
- Vortex Generators on the sides of the shield reduce wind turbulence
- All-new, airtight window beading provides wind/waterproof seal
- New, voluminous cheek pads and removable ear pads further restrain wind noise inside the helmet
Last update on 2023-06-05 / Affiliate links / Images from Amazon Product Advertising API