Our 15 Recommendations:
The 15 Top Buy Powered Subwoofer Car Reviews:
- 200-watt max, 120-watt RMS power output
- Designed to add extra bass to a car audio system that’s short on space
- built-in matched amp eliminates need to buy a separate amp, saves space, and easier to install
- Frequency response: 50 Hz to 150 Hz
- 8 in. preinstalled woofer
- Now includes a 10-inch sub model, along with the 8-inch
- 180 Watt amplifier drives the HS10; 150 Watt amp the HS8
- Ultra-compact at just more than 3" high
- Minimal Parts and Quick-Connect Molex Plug and Harness
- Remote Bass Control Included
- POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room.Mounting Type: Floor Standing
- LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. BLENDS EASILY WITH ANY SPEAKER and plays the most demanding nodes effortlessly without any distortion
- DOUBLE THE AMPLIFIER POWER TO 100 Watts of Dynamic Power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and FIT FOR EXTENDED USE
- EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly. Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
- A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a Phase Toggle Switch for multiple subwoofers, make this sub cohesive and complete
- Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.
- 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.
- Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
- Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.
- Thermal Protection Circuit, Short Protection Circuit.
- 1300 W Max Power (350 W Nominal) Pre-loaded 12" Injection Molded Polypropylene (IMPP) Composite Cone Construction Subwoofer
- Built-in 300 W Max (150 W RMS) Class D amplifier
- Ported enclosure design for powerful, deep and accurate bass response
- Variable Bass Boost (0 to +12 dB, 20Hz to 130Hz)
- Rockville WHEEL OF BASS 8" 500w Slim Under-Seat or Trunk Mounted Powered Car Subwoofer.
- Enclosure is very shallow at only 3.15” tall so it can fit anywhere. You can fit it under seat but it also sounds great and takes up little space in your trunk.
- Enclosure is made out of solid cast aluminum. Peak Power Handling: 500 Watts. RMS Power Handling: 125 Watts. Heavy Duty Mounting Feet. PWM MOSFET Power Supply.
- Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit
- Overload Protection Circuit. Green Power/Red Protect LED. Phase Switch: 0° or 180°. Low Pass Filter: 50Hz - 180Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz
- Rockville RBV12.1A Single 12" 500 Watts Active Subwoofer Enclosure. Size: 12".
- Peak Power: 500 Watts. RMS Power: 300 Watts. Nominal Impedance: Single 4-Ohm. 2" Voice Coil.
- Inverted Carbon Graphite Molded Dust Cap. Kevlar Reinforced Pulp Cone.
- Matte Black Custom Molded Grill. Double Laminated Foam Surround, Stitched to Cone.
- Frequency Response: 30Hz - 150Hz. Sensitivity: 93dB. Anti-Vibration Braced MDF Cabinet.
- Amplifier Power Output: 120 Watts RMS.Power source type:Corded Electric.Speaker size:8 inches
- 8" High performance subwoofer in a carpeted, vented enclosure
- High Level and RCA inputs for easy connection in any system set up
- External Bass Control is included for convenient control of volume from front of vehicle
- Rockville Rws12ca slim 1200 Watt 12" Amplified powered car Subwoofer Enclosure..Impedance: 4 ohm.Speaker size:12 inches
- 1200 watts peak power output. 300 watts RMS. 12" Super slim subwoofer.
- Ultra stiff composite pulp cone with Kevlar reinforcement. 3D molded acrylic dust cap. Expanded & Rolled Steal basket.
- High density laminated foam Surround. High power strontium magnet with ultra Saturated high BL motor structure.
- Vented core magnet motor structure. 2" High temperature aluminum voice coil. 8mm washer & yoke plates. 13.6mm Peak-to-Peak x-max. 70oz.
- Amazon Prime Video (Video on Demand)
- Herrie ten Cate, Robin Collins, David Karave (Actors)
- Jane Armstrong (Director) - Gary Lang (Writer) - Jane Armstrong (Producer)
- English (Playback Language)
- English (Subtitle)
- BUILT-IN AMPLIFIER: A built-in 1200 Max watt amplifier powers the subwoofer
- PULSE WIDTH MODULATED: This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Rockville RMW8P 8" 800 Watt car subwoofer + tunnel slot ported sub enclosure box
- 8” high power long excursion tuned subwoofer
- Ceja power rated 200 watts / 400 watts RMS / 800 watts peak
- 1.5” high temperature 4 layer kapton voice COIL
- 70 oz magnet Structure weight
- Rockville SS8P 8" 400w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub.
- Enclosure is made out of cast aluminum which stays cool at all times. Peak Power Handling: 400 Watts.
- RMS Power Handling: 100 Watts. Heavy Duty Mounting Feet. PWM MOSFET Power Supply. Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Overload Protection Circuit. Green Power/Red Protect LED. Phase Switch: 0° or 180°.
- Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz. THD: < 0.4%. Subwoofer Level Remote Control. Fuse Rating: Single 15A.
- Specifications: Peak Power 400 Watts. RMS Power: 100 Watts. Impedance: 4 Ohm. Dimensions (L x W X H): 11.4" x 8.3" x 2.8" Inches. Frequency Response: 20Hz - 150Hz. Signal to Noise Ratio: >90dB. Sensitivity: 90dB @ 1w / 1m. Input sensitivity, Low level: 300mV. Input sensitivity, High level: 1.0V
- NYC Acoustics NSE12L 12" 1200w Powered Car Subwoofer in Ported Enclosure w/ LED Lights.
- 1200 Watts Peak power output. 400 Watts RMS. 3D molded acrylic dustcap. Loaded with a High Powered 12" Subwoofer.
- Non-pressed paper cone with Kevlar reinforcement. Blue LED's Built-In. Expanded & Rolled Steal Basket. High Density Specially Treated Foam Surrounds.
- High Power 50 Oz Ferrite Magnet with High BL Motor Structure. Vented Core Magnet Motor Structure. 2" High Temperature 4 Layer Aluminum Voice Coil.
- Top Quality Washer: 114MM x 8MM. Top Quality T-Yoke Plate: 114MM x 6MM. X-Max: 12mm Peak-to-Peak Excursion. Impedance: 4-ohms. Frequency response: 30Hz-450Hz.
- MB Quart RW-110A 800W REFERENCE Series 10" 4-Ohm Power Subwoofer Amplifier
- Complete control of amplifier signal, essential when using two or more amplifiers
- Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.
- Stable power through the PC board with minimal heat generation
- Wired Bass Remote allows adjustments to bass frequencies to be made from the control mounted anywhere in the vehicle.
Last update on 2023-01-12 / Affiliate links / Images from Amazon Product Advertising API