Our Favorites:
The 10 Best Budget 10-Inch Car Subwoofer Reviews:
- Rockville W10K6D2 V2 K6 Series 10" Dual 2-Ohm Car Subwoofer. Peak Power Handling: 2000 Watts. Program Power Handling: 1000 Watts.
- CEA Rated RMS Power Handling: 500 Watts. 2.5" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire. The wire we use is made in the USA!
- It is one of the most important components to make the sub high quality and last longer. Double Stacked 100 Oz High Quality Magnet.
- Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient. Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone.
- Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Red Stitching Cone Reinforcement Ensures Long Life. Polypropylene (PP) Dustcap.
- POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room.Mounting Type: Floor Standing
- LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. BLENDS EASILY WITH ANY SPEAKER and plays the most demanding nodes effortlessly without any distortion
- DOUBLE THE AMPLIFIER POWER TO 100 Watts of Dynamic Power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and FIT FOR EXTENDED USE
- EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly. Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
- A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a Phase Toggle Switch for multiple subwoofers, make this sub cohesive and complete
- 10-Inch Dual 4-ohm Car Subwoofer
- Peak Power: 400 Watts | RMS Power: 200 Watts
- 2" BASV Premium Voice Coil | Advanced Air Flow Cooling Design
- High Strength Pressed Paper Cone and Foam Surround
- Frequency Response Range: 28 Hz - 325 Hz | Sensitivity: 84.4 dB
- 1000 WATT POWER: This high powered subwoofer system has a maximum power output of 1000 watt / 500watt RMS for full range surround stereo sound reproduction and impressive bass response so you can play your favorite tracks as loud as you want.Impedance: 4 ohm.Power source type:Corded Electric.Speaker size:0.01 inches
- BUILT TO LAST: Features non-fatiguing rubber suspension, specially designed rubber magnet boot, non-press cone, specially treated foam surround, along with bumped and vented motor construction that keeps your equipment safe for extended excursion
- DUAL 4 OHM IMPEDANCE: The audio projection subwoofer has 90 dB and dual 4 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound
- DUAL VOICE COIL: This complete subwoofer features 50 oz magnet structure and 2 inch 4 layer dual voice coil to enhance its performance and can handle higher operating temperatures. it also has spring loaded push down speaker terminals
- 10" STANDARD SIZE: Pyle easy to mount car speaker follows the standard size for most vehicle stereo system. It has a 4.7" mounting depth and 10" overall diameter. Perfect for new speaker construction or replacing worn / blown speakers
- Cone - Made from polyurethane, the CG10D 10-inch car subwoofer provides a resilient and durable material that can offer great sound with the advantage of long-lasting subwoofers
- Voice Coil - Dual voice coils will not produce more bass than a single voice coils. It is more about producing the right Ohm load for maximum efficiency from the amplifier that you are running. Ohms are a measurement of electrical resistance
- Surround - Foam is very flexible, providing the subwoofer with higher efficiency. This also translates to better excursion. (How far the cone of a speaker linearly travels from its resting position)
- Basket - A stamped basket can absorb and transfer much of the energy produced by the speaker. It has good corrosion resistance, good mechanical property, high thermal and electrical conductivity and retains strength at high temperatures.
- Specs - Resonant frequency: 36 Hz, Sensitivity SPL (1W/1m): 87 Db, Impedance: 4 Ohms, Port frequency: 38 kHz, Dimensions: 10.25” x 10.25” x 4.25”, Mounting Depth: 3.75”, Mounting hole: 9.07”, Weight: 4.05 Lbs.
- Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.
- 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.
- Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
- Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.
- Thermal Protection Circuit, Short Protection Circuit.
- Spun copper front-firing Cerametallic woofers
- 10-inch, front-firing driver
- 150 watts continuous, 300 watts dynamic power
- Strong, flexible, removable grille
- All digital amplifier for high-efficiency and true-to-source sound accuracy
- Planet Audio TQ10S Torque10 inch SINGLE Voice Coil (4 Ohm) 1200-watt Subwoofer
- One 10" Woofer with SINGLE 4 ohm Aluminum Voice Coil
- 1200 Watts MAX 600 Watts RMS Power Handling
- 87dB Sensitivity, 32 Hz Resonant Frequency
- Treated Paper Cone and Foam Surround
- 10-Inch Dual 4 ohm Shallow Mount Subwoofer
- Peak Power: 800 Watts | RMS Power: 500 Watts
- Shallow Mount Design - Mounting Depth: 4.41"
- High Performance Pressed Paper Cone Stitched to Premium Foam Surround
- Sensitivity: 85.1 dB | Fs: 41.9 Hz
- Cone - Made from Polypropylene, the AR100DVC 10-inch car subwoofer provides a resilient and durable material that can offer great sound with the advantage of long-lasting subwoofers
- Voice Coil - Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. Making our voice coils with this material, gives our speakers the advantage of longer pay times with lower weights
- Surround - We use rubber in a lot of our subwoofers. It has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear.
- Basket - A Stamped basket frame is able to absorb and transfer much of the energy produced by the speaker. It has good corrosion resistance, good mechanical property, high thermal and electrical conductivity and retains strength at high temperatures
- Specs - Resonant frequency: 36 Hz, Sensitivity SPL (1W/1m): 85 Db, Impedance: 4 Ohms, Port frequency: 38. 2 Hz, Dimensions: 11” x 11” x 5. 4”, Mounting Depth: 4. 8”, Mounting hole: 9. 1”, Weight: 7. 6 Lbs.
Last update on 2023-03-21 / Affiliate links / Images from Amazon Product Advertising API