Our Best Picks:
Best Battery Selector Reviews:
- Heavy Duty - Rated at 900 Amps momentary, 500 Amps intermittent and 300 Amps continuous at 12V
- Disconnects the battery safely, to eliminate any power draw from the battery when vehicle or boat are not in use.
- Great for your boat, RV, show car, trailer, winch power cable, and more
- Heavy Duty Switch combined with small footprint
- Blue Sea Systems Battery Switch m-Series Selector, part number 6007, is a Selector 4 Position switch. Switches isolated battery banks to all loads or combines battery banks to all loads
- IP66 waterproof, ISO 8846 and meets ABYC requirements. Ignition protected—safe for installation aboard gasoline powered boats
- Make before break contact design allows switching between battery banks without power interruption
- Continuous Rating: 300A, Maximum Voltage: 32V DC
- 300A continuous, 450A intermittent; Voltage: 12V-24V
- Selector 4 position -Switches isolated battery banks to all loads or combines battery banks to all loads
- Make before break contact design allows switching between battery banks without power interruption
- Can be used to disconnect the battery of vehicle or boat when not use to ensure safety.
- Scope of application: large current batteries such as large trucks, engineering vehicles and yachts are powered off.
- For use with 12, 24 and 32 Volt Marine Electrical Systems
- Capacity - 250 AMPS Continuous, 360 AMPS Intermittent
- Ignition Protected
- Built with quality materials
- Selector 4 Position. Switches isolated battery banks to all loads or combines battery banks to all loads
- Ignition protected—safe for installation aboard gasoline powered boats
- IP66 waterproof, ISO 8846 and meets ABYC requirements
- Terminal Stud Size: 3/8" - 16
- Continuous rating: 350A, Maximum voltage: 32V DC
- Universal mount selector switch with AFD. Continuous Amps: 230, Momentary Amps: 345
- Longer stud lengths for improved assembly and easier cable routing
- Built with heavy-duty copper sweep contacts to ensure positive circuit control
- Rugged internal components protected by a tough, impact resistant polycarbonate housing that is impervious to the elements
- Cable Lug Size: 3/8". Dimensions: 5.0" x 2.75"
- DUAL BATTERY DISCONNECT SWITCH: The master power cut off switch allows for two batteries to operate independent of one another, or for both to be in the ON or OFF position at the same time. Four position rotating switch provides Battery 1, both on, battery 2, both off alternatives. Removable rear cover insulates the rear terminals against any short circuits. 4 Removable side plates provided access for battery cables
- SAVE YOUR BATTERY: The battery kill switch can help you to shut down the power of battery easily and safely when not in use or storage so as to keep your vehicle from draining out of power as well as extend the life of your battery
- SOLID AND COMPACT SHUT OFF SWITCH: This battery disconnect isolator switch is made of PBT plastic housing, copper tin plating inner stud. Come with four stainless steel mounting screws and caps to help fix the switch tightly. The red knob is for On/Off control. Can not be removed from the switch. Stud Size: 3x5/16" (8mm). Ideal for marine/vehicles applications
- WIDELY APPLICATION: 1-2-Both-Off, Rating: 200 Amps Continuous,1000 Amps momentary at 12V DC. Can be used with 12V - 48V DC systems to isolate and secure the electrical system. Can stand alone or be locked together with other switch. Widely used for marine, boat, RV, camper, travel trailer, truck, ATV, UTV, car vehicles, battery banks and other devices
- REST ASSURED TO PURCHASE: We offer 30-day money-back for any reason, 12-month warranty for quality-related issues. Any problem in using our battery disconnect switch, please kindly contact us, your problem will be solved within 24 HOURS
- Switches isolated battery banks to all loads or combines battery banks to all loads
- Ignition protected—safe for installation aboard gasoline powered boats.
- IP66 waterproof, ISO 8846 and meets ABYC requirements
- Accepts two 4/0 AWG (95mm²) battery cables. Terminal Stud Size: 1/2"
- Continuous Rating: 500A, Max Voltage: 32VDC
- Cole Hersee M750 Battery Selector Switch
- M750
- Operation: 1-2-both-off, 4 position, 200A DC Continuous (1hr), 455A DC Intermittent (5 min), 1250A DC Cranking (10 sec); Voltage: 12V-48V DC; Stud Size: 3 x 5/16" (8mm), 3 mounting screw holes (8mm diameter) for 8-10MM screw connection (not included mounting hardware)
- The patented contour locking system, allowing it to be a stand alone unit, or locked together with other switches to isolate and secure the electrical system, offers a simple economic way of separating two batteries
- This battery cut shut off kill switch has four removable side plates. The rear cover insulating the rear terminals against any short circuits. Equipped with 4 sets of bolts
- Tin-plated copper studs and nuts; Ignition-protected. ABS plastic housing, durable made for safety use
- Widely used for Car, Marine, Boat, RV, Camper, Travel Trailer, Truck, ATV, UTV, Battery banks and other 0 up to 60V Devices; 1 Year Warranty--a replacement or refund is guaranteed
- Battery selector switch for use with 6, 12, 24, and 32 volt marine electrical systems
- Rated at 380 amps continuous, 850 amps intermittent (5 minutes on, 5 minutes off)
- Easy Installation
- Built with quality materials
- ICON Label Set Included for Circuit Identification.
- Label with International ONOFF Legends.
- All Non-Corrosive Marine Grade Metals.
- Product Dimensions 2.9H x 2.9W x 3.1D.
- Weight 0.8lbs.
- ☆【Premium Quality,Durable】Made of premium ABS and metal material, 12V-48V battery disconnect switch is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
- ☆【Waterproof & Protective Cover】This waterproof power disconnect cut off switch is designed with a waterproof cover on the top can better protect the key hole. Professional characteristics, high reliability. Compact size, sleek modern appearance, easy to install and wire
- ☆【Disconnect Battery Safely】This battery isolator switch can eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely. 2-Position: ON and OFF positions
- ☆【Battery Disconnect Shut Off Switch】They are offered as main car kill disconnect switches, rated 75 Amps intermittent, 50 Amps continuous at max.50V DC; Cranking Rating: 300Amps 5 sec; Contact Resistance: 50m ohm Max.;Isulation Resistance: DC 500V 100M ohm Min
- ☆【Wide Application&Quality Guarantee】The waterproof battery isolator Selector switch is perfect suitable for cars, off road vehicle, truck, motorcycle, boat, etc.Professional characteristics, high reliability, 100% test before shipping to ensure product perfect, stability and durability.If you are not satisfied with our Battery Isolator Switch,We accept all of the return, replacement or refund requests
- Permits selection between batteries for starting, charging or operation in parallel
- For use with two or more batteries and systems under 50V
- UL listed, ignition protected and CE approved
- Capacity: 250A continuous, 360A intermittent
- Size: 5-1/4 inch x 2-5/8 inch
Last update on 2023-01-12 / Affiliate links / Images from Amazon Product Advertising API