Our Top 10 Recommendations:
10 Top Amplified Subwoofer Reviews:
- Rockville Rws12ca slim 1200 Watt 12" Amplified powered car Subwoofer Enclosure..Impedance: 4 ohm.Speaker size:12 inches
- 1200 watts peak power output. 300 watts RMS. 12" Super slim subwoofer.
- Ultra stiff composite pulp cone with Kevlar reinforcement. 3D molded acrylic dust cap. Expanded & Rolled Steal basket.
- High density laminated foam Surround. High power strontium magnet with ultra Saturated high BL motor structure.
- Vented core magnet motor structure. 2" High temperature aluminum voice coil. 8mm washer & yoke plates. 13.6mm Peak-to-Peak x-max. 70oz.
- powered polypropylene subwoofer with built-in amplifier that matches the woofer performance at 150W RMS or 450W Peak.
- 12" (305mm) woofer
- 35 - 120Hz frequency response
- Slipstream port eliminates port noise and provides distortion-free bass at high output levels
- Polypropylene Woofer Cone
- 30W 8-Inch Amplified Subwoofer.Power source type:Corded Electric.Speaker size:8 inches
- Made with the highest technical quality to ensure maximum reliability and durability
- MAX power handling 300 watts (300 Watts Peak) and an RMS power handling of 120 watts (300 Watts Peak)
- Features variable bass boost, adjustable input sensitivity, and a low-pass filter
- All in one 8"(210mm) subwoofer with small unit design to fit under most vehicle seats.
- Built-in Class-AB amplifier, "All-In-One Bass Addition Package "no need for external amplifier.
- Die-cast aluminum heatsink.High quality material design and craftsmanship.Supports RCA (low level) OR speaker(high level) signal input from audio source
- Adjustable GAIN control to match original vehicle system, so all speakers complement each other
- Easy-to-use control adjustments conveniently located on side of unit. Remote bass volume control knob
- Primary Power Output Rating 135W at 2Ω, 20-200Hz and ≤ 1% THD+N
- Compact Design (Measures 13.5" x 9.5" x 3")
- Dynamic Power Output Rating 200W at 2Ω, ≤ 20% THD+N
- High and Low Level Inputs / Remote Bass Knob Included
- 400mV to 5V Signal Input / SNR Rating 91 dBA
- 600 WATT POWER: Pyle’s 8" Amplified Low Profile Subwoofer System offers a maximum power of 600 watts. It lets you pump out some great low frequency bass volume to enhance the party vibe making it a great addition to your car music audio system
- BUILT-IN AMPLIFIER: The integrated amp in the compact subwoofer features low pass crossovers & a control for adjusting input sensitivity from 0.12V to 3.5V. Includes variable bass boost, control the subwoofer level w/ the remote level control module
- LOW PROFILE: With height of just 3", it's a perfect solution when space is an issue, it can easily fit under the seat of most vehicles! Total dimension is 12.8”x9.5"x3” & includes mounting hardware. A great addition to your car stereo sound system
- HIGH LEVEL INPUT: Speaker line inputs are known as high-level inputs. If your head unit does not have RCA outputs, you can use the speaker outputs for the audio source. Use the supplied cable and connect the outputs properly as shown in the manual
- LOW LEVEL INPUT: Line level inputs, also known as RCA input or low-level inputs. Low level inputs are the recommended way to introduce the audio signal to the hideaway subwoofer if RCA outputs are present on your head unit or other signal source
- powered polypropylene subwoofer with built-in amplifier that matches the woofer performance at 150W RMS or 450W Peak.
- 12" (305mm) woofer | 35 - 120Hz frequency response
- Slipstream port eliminates port noise and provides distortion-free bass at high output levels
- Polypropylene Woofer Cone
- Included components: One SUBBP12AM powered Subwoofer/enclosure, owner's manual and remote control
- RBlaupunkt GTHS81 8” Amplified Subwoofer 320 WattsCA Low Level Input: 0.15V. High Level Input: 1V
- Variable Bass Boost: 0 to +12dB
- Phase Selector Switch: 0 to 180 Degrees
- Signal to Noise ratio: 91dB. Frequency Response: 20Hz-150Hz
- Dimensions: 13 x 9.45 x 2.87 Inches
- The Punch P300-10 is a self-contained all-in-one solution featuring a Punch 10” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier
- The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving – Dimensions (Wedge H x W x D1 x D2): 13.3” x 18” x 8.9” x 5.9”
- Featuring an adjustable 12db/Octave low pass crossover, built-in adjustable bass EQ, built-in 0°/180° phase switch and Remote bass level control included
- Closed-loop design ensures optimum performance between woofer, amplifier and enclosure with easy integration in aftermarket or OEM audio systems using RCA or speaker level signals
- Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
- BUILT-IN AMPLIFIER: With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies
- VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the LOPRO8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
Last update on 2023-04-01 / Affiliate links / Images from Amazon Product Advertising API