Our Best Picks:
10 Top Aftermarket Gauges Brands Reviews:
- ▲Used to measure the fuel level of automobile.
- ▲ High sensitivity and easy operation.
- ▲Inside diameter of the screen:43mm / 1.7" Outside diameter of the screen:56mm / 2.2"
- ▲Suitable for most 12V gasoline vehicles
- ▲Package list:1 x Fuel Level Gauge ,1 x Fuel Level Transmitter ,1 x Oil float, 1 x Rubber pad, 1 x Bolts Pack
- Impressive Brightness: The 3PCS light strip includes 270 PCS 5050-SMD LED chips, outputs a 3900LLM 6000K super bright white light to light up your entire truck bed.
- Quick Installation: Peel and stick, the self-adhesive tape with tough-as nail adhesive enhancer for strong sticking. You can also add on the included mounting hardware for extra security.
- Ease and Safe Electrical Hookup: Come with splitter cable, 5A inline blade fuse, on/off switch, extension cable, mounting hardware for all your wiring needs. Always ensure the circuit safety for your on-road driving.
- Flexible & Durable Design: The light strip is in IP67 sealed housing, well protect strip against raindrop, dirt and sand, super durable and flexible with up to 30, 000 hrs lifespan
- Wide Application: Can be widely used for RV Awning Light, truck bed light, step bar led light, side door light etc.
- [A Fine Replacement Fuel Guage] The Needle is Smooth Sweeping and Surpasses the Original Version in the Boat(the Needle doesn't Bounce all over the Place as the Boat is Underway or in Rough Sea Conditions).
- [Adjustable and Wide Application]100TECH Boat Fuel Gauge is Designed to Measure & Display the Amount of gas or Fuel in Your Boat or Vehicle's Gas Tank. Signal Input : 0-190ohm, 240-33ohm, 240-30ohm, 0-180ohm, 10-180ohm.
- [Easy to install and Calibrate] Install diameter: Φ52mm or 2-1/16'', Indication range: E~F, Working voltage: 9-32v dc [ fit 12V-24V Vehicle or Engine] The instruction is Easy
to Follow. - [7 Color Adjustment Cycle Modes] Includes Red(Default), Green, Blue, White, Yellow, Yellow Green, Orange, Purple Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle.
- [Body Material]IP67 waterproof and Dustproof grade,316 Stainless Steel Bezel100TECH Guarantees with 1 Year Limited Warranty & Free Lifetime Technical Support
- MEASURES FUEL LEVEL:The fuel level gauge will accurately display fuel level remaining in your gas tank. It's ideal for anyone who is building a custom dash or looking to replace their stock fuel level gauge.
- 52mm (2") DIAMETER:Standard 52mm (2") dial for a 52.4mm (2-1/16") opening and requires 12-volt negative ground systems, and compatible with most Ohm range (240 - 33 Ohm) sending units.
- FLTMENTS:Suitable for 240-33ohm signal fuel level sensor properly. Pls confirm your sensor's signal.
- DURABLE & ANTI-RUST:Black Aluminum bezel with burnished edge,Scratch resistant curved glass lenses
- EASY TO READ AND INSTALL:High sensitivity and easy operation.Rear twist-on mounting ring is included for easy installation.but professional installation is highly recommended.
- multi-function designed: this switch panel is integrated with 2 rocker switches and 4.8a dual usb charger with voltmeter. suitable for most 12v-24v dc cars, utvs/atvs, trucks, trailers, rvs, caravans, buses, marine boats, yachts etc.
- efficient charge: dual usb charger enable you charge two devices simultaneously at full speed with 2.4a in each usb port. with a total power of 4.8a, it works for all usb-powered devices. makes the charger 40% faster than conventional chargers.
- led voltage display: the voltmeter is builted in the center of the usb charger, clearly shows the current readings of working volts, easily notice the voltage condition of the vehicles.
- quality assurance: the panel is made of strengthened aluminum and well-conductive pins,ensure long lasting durability highly optimized for general use and will give you a pleasant experience
- package include:1x 2 gang switch panel,4 x fixing screws, 2 sets of diy stickers
- HOURS ---- Monitor the total run time(TOT) and single working hours(JOB) of gas engine, with ability to program previous hours(INT) for an replacement;Accomplish maintenance at recommend intervals to determine the due time(SVC);TOT & JOB hours range:0-999,99 hours;SVC timer range:5-1000 hours.
- RPM ----- Display the real-time RPM readout by vairous engine firing patterns setting to adjust engine idle speed; Alert channel for revolution exceed reminder;Viewable highest revolution since the engine started; RPM measurement range: 0-25000RPM, Alert range: 100-25000RPM.
- TEMP ---- Keep eyes on engine current and maximum temperature at all the times by probe senor; Remind the temperature exceed for engine maintenance; Easy to switch between Celsius and Fahrenheit;Temp measurement & alert range: -20°C~+300°C(-4°F~+572°F)
- BACKLIGHTS ---- Default green backlight will help to use it at night or dim place, you can set the backlight mode by always-on, OFF and automatical mode(OFF default, button to wake up) as request;Red backlight will remind the engine RPM or TEMP exceed.
- OTHERS ---- Easy to mount it on proper position by stick-on, screw-on and extra bracket(not include), one-wire wrapping of spark plug for signal detect (68.8inches, workable if shorten or extend) to work right away;Favorable water and shock resistence; Battery capacity will be kept in good condition with insulation sheet during transport, it is repalceable;LCD shutdown also can extend the lifetime in vacant time;Reliable technical support and after-sales service(2 years).
- GlowShift Universal Black Single Pillar Gauge Pod is Designed to Fit Any Vehicle & Mounts an Aftermarket Automotive Gauge to the Vehicle's A-Pillar - Overlay Design Mounts Pod on Top of the Factory A-Pillar
- Holds (1) 2-1/16" (52mm) Gauge - Compatible with GlowShift 7 Color Series, 10 Color Digital Series, Elite 10 Color Series & Tinted Series Gauges
- Manufactured from High-Quality ABS Plastic - Designed to Protect Against Warping, Cracking & Color Fading
- Includes Pillar Pod Mounting Hardware & Foam Backing Insert that Contours to the Factory A-Pillar
- GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support
- Includes bulb and socket assembly with red and green bulb covers
- Available in narrow or wide sweeps
- Three different temperature ranges available: 130-290, 130-180, and 100-280
- Vibration, temperature, and moisture-resistant
- Available with an adjustable tilt tube for optimal alignment with driver's line of sight
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- Made of super durable plastic material for long-time usage. Ergonomic design with super lightweight, easy handheld features which effectively effort saving for various interior and exterior car trimming in the shortest time.
- Great for car audio/radio system installing or removing, door panel, moldings, window trims or automotive interior repairing and furniture restoration.
- Package includes 4 plastic panel removal tool + 1 fastener remover to facilitate your needs when repairing. A professional tool kit that is sturdy and easy to use.
- Made of impact resistant nylon fiber material with matte surface treatment, tougher than common ABS one, it is eco-friendly, non-toxic and breakage-proof.
- All tools are molded according to car trimming needs on the market, moderate curve that is not sharp, anti-scratches and harmless to car paint in the whole modification [Universal Application] This multi-functional combination tool set designed for all models of cars, boats, and rvs trimming jobs with variety of shapes and sizes, even for hard to reach areas.
Last update on 2022-03-19 / Affiliate links / Images from Amazon Product Advertising API