Our 10 Favorites:
The 10 Best Adhesive For Car Dashboard Reviews:
- Strong Stickness: Original 3M Vhb stick adhesive pads, Double sided self sticky, 1.55mm thickness GPH 160 Vhb adhesive pads, stronger than most adhesive pads even in high temperature.
- Suitable for stick many kinds of material with flat hard surface. It can be used in home bathroom mirror, refrigerator, bed post, wall, locker, office, driving personnel and other related equipment replace.
- Rectangular 3M Vhb sticky adhesive tape can be used on the bottom of the most dashboard 360 degrees Rotation magnetic car phone mount holder, which is stable even in bumpy roads. It is a strong sticky adhesive replacement for phone car mount. Compatible with Wizgear, Bextrix, Scosche ,Trainium ,PLDHPRO ,Ailun etc. magnetic phone car mount.
- This 3M Vhb adhesive pad is high temperature resistance and low temperature resistance, water-proof, Tear off non-trace.
- Note:(1),Please don't stick the 3M adhesive pad on very soft, rugged, texture, grease surface or leather surface.(2),Make sure the desired surface is clean and dry.(3),The 3M Vhb adhesive pad is one-time use.(4),It is recommended to wait at least 24 hours ensure the sticker get the best stickiness before use.(5),Worry-free:APPS2Car comes with worry-free lifetime and excellent customer service
- Phone Holder Adhesive Patch Backing: Red multi-use 8 PACK Smaller 2 sides VHB 3m replace sticky adhesive glue part works for hands free car dash holder, finger holder, phone ring holder, plastic mount, dashcam, ball mount, grip holder back & magnetic cell phone car mount base for applications. Tiny long-lasting adhesive replacement kit re-stick magnets wall mount & magnetic mount. With multiple adhesive strips cell phone holder, you position the android on a flat surface in the dashboard or van.
- Super Strong Circular 3M Sticky Adhesive Dots: Extra strong 2 PACK both sides larger adhesive replacement foam thin sheet work perfectly for collapsible grip & switchable tops socket. Withstand heat resistant on hot climate car mount replacement stickies parts, no need to buy re-stickable gps grip mount or dash cam. Heat resistant vhb 3M double sided adhesive sticky pads art for custom swappable expanding stand. Use heat tolerance adhesive pads sticky notes to reattach it.
- Replaceable Alcohol Pads Extra: Clean the chosen area to place your smartphone. Make sure the mounting surface and base of mount adhesive mat tags clear cleaned completely before attaching to affix and secure a new blanks 3M adhesive stickers backers for carmount or shower caddy or USB splitter even motorcycle helmet. For the ultra thin 2 sided 3M adhesive tapes dots, if you find the magnet phone holder cradle-less adhesion tabs 2-sided hard to be tearable, pls press it back and peel again.
- Easy to use: Just remove the used tacky double-sided tapes patch and removable thick 3M circle tape tab of car mount and clean up the mounting surface with alcohol pad until fully dry before installation, then restick to attach a new effective authentic permanent fixture and replacable 3M two way circles self adhesive sticky back film on the backs of flex grip mount and press firmly for 5 minutes front to back for better sticking to the bottom of auto car mount. Wait 24 hour to use after stuck.
- What You Get: Volport heavy duty two sided tape 8 piece small 3M phone sticky adhesive patches gel top clip on for hanging as backup, extends the lifespan of magic mount and dash mount, simple strongest alternative 2 pcs large two sided 3M adhesive disc bulk reapply and hold for socket grips, addition 1 pair alcohol pads. 8 pack small sticky adhesive replacement is just designed for magnetic mounts and 2 pack big sticky adhesive replacement is just designed for the base of socket grip.
- Upgrade 3M Sticky Tapes, To provide smooth, glass-like surfaces for pedestals of suction cup car mounts to work more effectively.
- 3M PE foam adhesive at the bottom can be fixed on textured surfaces.
- Has a diameter of around 2.76 inches, applicable to most suction cup GPS/mobile holders on the market.
- No tools required for installation.
- Buy with confidence as every APPS2Car product comes with life time customer service.
- [6Pcs Clear Adhesives Replacement] - AZXYI 6 Pcs circle heat resistant clear sticky adhesive pads(Diameter: 70mm,2.76") for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup. Note: The package not include the mounting disk.
- 【Easy to Use】To maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your dashboard/ windshield.
- [Cut into any size you need & Designed for Suction items] - You can cut pads into smaller pieces if need. Compatible with most suction cup dashboard mount and other windshield long arm mount, GPS holder, EZ Pass/I-Pass/SunPass holder, camera mount, ETC, wireless charger base, dash camera mount holder etc on the market.
- [Easy to Install] - Provided rounded rectangle raised label to easily peel off the white release film of the adhesive pads. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other white side film and stick to your car dashboard. Press down repeatedly for 5-10 minutes to increase the contact of the adhesive with the substrate. Please wait 24 HOURS to use.
- 【Very High Bond & Easy to Remove】These high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond, bonding almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.
- Strong Adhesive: Made of ABS sheet and strong adhesive, this disc dash pad can be firmly attached to your car and your device, so that your device won't fly away when turning.
- Durable And Long-Lasting: These round sticky pads have 40% stronger adhesion than traditional adhesives on the market and last longer. It is also heat and moisture resistant and can adhere to vertical surfaces, soft-touch dashboards and windshields.
- Leaves No Damage:This mounting disk won’t leave a trace when you decide to remove it after installing. While the adhesive is strong, the disk can easily be lifted without leaving any residue.
- Suitable Size: dashboard mount disk pad measures 78 mm/ 3.1 inch in diameter, it can be widely applied to any suction cup accessories that are smaller than 3.1 inch. suction cup mounting disc can be wide applied to smartphone mount, car camera, GPS suction mount and more.
- Installation Steps:Put the pad on the CLEAN & FLAT surface and Press the pad hard. Wait for 24 hours,then install the suction on it.
- 【Compatible with Various Kinds of Dashboard Magnetic Mounts】 Pop-tech's extra adhesive tapes are made with 3M HVB original adhesive. When the base of your dashboard magnetic mount loses its stickiness, replacing the adhesive on the base of the holder is the best way. And our super sticky adhesive tape is your best choice! These magnetic dashboard mount base replacement sticky adhesive compatible with Wizgear, Scosche, Bextrix, APPS2Car, Trainium, etc.
- 【Adhesive size】 Rectangle : 1.85" * 0.87", the thickness is 0.047". Perfectly suitable for 95% of dashboard mounting bases. It can be pieced together or cut to replace the base sticker tape of driving recorder, dash cam, ring grip mount, automotive windshield sticky mount, smartphone holder, audio DAC! Versatility: Stickers can be affix on flat hard surfaces, such as home bathroom mirrors, refrigerators, bedposts, walls, lockers, offices, dashboards, windscreen.
- 【Very High Bond Stickiness & Heat Resistance】 Pop-tech's rectangular adhesive tape uses the most advanced silicone adhesive synthesis technology, and its steady viscosity is 40% higher than ordinary adhesive tapes. High temperature resistance: Pop-tech's glue adhesive can resist high temperatures up to 120°! It can maintain the best viscosity under high temperature environment. Ease of use: tear off without trace!
- 【Note】 (1) Please do not stick the 3M adhesive pad on the very soft, rough, textured, oily surface or leather surface. (2) Please ensure that the required surface is clean and dry. (3) The 3M VHB rubber pad is for one-time use. (4) It is recommended to wait at least 24 hours to ensure that the sticker has the best adhesion before use. (5) Do not touch the adhesive with your hands
- 【Warranty】 Pop-tech products provide 12 months worry-free after-sales warranty service (extended from 12 months to lifetime if you contact customer service with any problem ). The package contains : 8 pcs Universal square adhesives and 8 pack Universal alcohol pads for cleaning.
- 【3Pcs Clear Adhesives Replacement】PKYAA offers 3Pcs round clear sticky adhesive pads(Diameter: 2.76"/70mm,) for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup.
- 【High Temperature Resistance Sticky Adhesive】These stickers have high temperature(120℃+) resistance performance. You can use it without worry in hot Summer. Extra strong both side clear adhesion pads's stickiness is 40% stronger than ordinary sticky adhesive. Easy to fix your car phone socket base, heavy duty dashboard mount base, you can stable and secure driving uber, truck, vehicle in bumpy roads.
- 【Easy to Install】Provided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other red side film and stick to your car dashboard. Press down repeatedly to increase the contact of the adhesive with the substrate. please wait 24 HOURS to use.
- 【Easy to Remove】These high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond, bonding almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.
- 【Package includes】3 x 2.76"(70mm) round sticky adhesive. Please do not hesitate to contact us and we will provide you our best after-sale service.
- 【Strong Stickness】Original 3M Vhb stick adhesive mount,1.55mm thickness red Vhb adhesive pads, stronger than most adhesive pads.This 3M Vhb adhesive pad is high temperature resistance and low temperature resistance, water-proof, Tear off non-trace.
- 【Highly practical】Suitable for stick many kinds of material with flat hard surface.It can be used in home bathroom mirror, refrigerator, bed post, wall, locker, office, driving personnel and other related equipment replace.
- 【Wide Compatibility】Rectangular 3M Vhb sticky adhesive tape can be used on the bottom of the most dashboard 360 degrees Rotation magnetic car phone mount holder, which is stable even in bumpy roads. It is a strong sticky adhesive replacement for phone car mount. Compatible with OHLPRO, MAGJIEYX, XWXELEC ,TIKECO ,PLDHPRO etc. magnetic phone car mount.
- 【Note】(1)Please don't stick the 3M adhesive pad on very soft, rugged, texture, grease surface or leather surface.(2)Make sure the desired surface is clean and dry.(3)The 3M Vhb adhesive pad is one-time use.(4)It is recommended to wait at least 24 hours ensure the sticker get the best stickiness before use.
- 【Worry-free】Comes with worry-free lifetime and excellent customer service.
- ▶ [PREMIUM STICKY PAD]: When you want a dashboard car phone mount, maybe you are worried about the suction cup of your car mount, which is not stronger, maybe you also afraid that your car dash does not accept to the suction cup of the holder. Now, with the adhesive pad, you never worry about it anymore. Everything is perfect!
- ▶ [ SIZE ]: The diameter: 80 mm(3.15 inches), TORRAS 2in1 car phone mount would be suitable for it very well. Also, if you have a smaller suction cup than this size, that still works perfectly.
- ▶[ PACKAGE ]: 1 x sticky pad.
- ▶[ WHAT TO NOTE ]: Please don't touch the adhesive with your finger. Select a certain place to install, then don't move again.
- ▶[PROTECT YOUR CAR FROM DAMAGE]: If you frequently pick up the suction cup from the dashboard, it may damage your car as the time gone, but use the sticky pad, it protects your car from damage.
Last update on 2023-03-28 / Affiliate links / Images from Amazon Product Advertising API