Our 15 Recommendations:
The 15 Top Active Car Subwoofer Reviews:
- Rockville SS8P 8" 400w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub.
- Enclosure is made out of cast aluminum which stays cool at all times. Peak Power Handling: 400 Watts.
- RMS Power Handling: 100 Watts. Heavy Duty Mounting Feet. PWM MOSFET Power Supply. Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Overload Protection Circuit. Green Power/Red Protect LED. Phase Switch: 0° or 180°.
- Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz. THD: < 0.4%. Subwoofer Level Remote Control. Fuse Rating: Single 15A.
- Specifications: Peak Power 400 Watts. RMS Power: 100 Watts. Impedance: 4 Ohm. Dimensions (L x W X H): 11.4" x 8.3" x 2.8" Inches. Frequency Response: 20Hz - 150Hz. Signal to Noise Ratio: >90dB. Sensitivity: 90dB @ 1w / 1m. Input sensitivity, Low level: 300mV. Input sensitivity, High level: 1.0V
- 1300 W Max Power (350 W Nominal) Pre-loaded 12" Injection Molded Polypropylene (IMPP) Composite Cone Construction Subwoofer
- Built-in 300 W Max (150 W RMS) Class D amplifier
- Ported enclosure design for powerful, deep and accurate bass response
- Variable Bass Boost (0 to +12 dB, 20Hz to 130Hz)
- Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.
- 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.
- Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
- Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.
- Thermal Protection Circuit, Short Protection Circuit.
- Pioneer TS-WX130DA Compact 8" x 5. 25" 160-Watt Active Subwoofer with Built-in Amp 8" x 5. 25" woofer ; 160W max
- 50W nominal; Aluminum cone; Urethane surround; Built-in Class D amp; Digital Bass Control tailors frequency response & increases performance with selectable Deep or Dynamic listening modes; Gain
- LPF
- phase & bass modes controllable at remote; Freq resp
- Deep Mode: 20Hz-200Hz; Freq resp
- Fully functional and easy to debug
- 68 mm Slim fuselage, installed under the seat, the effect is better
- 10 inch woofer speaker
- Design of high temperature resistant coil
- Black paint stainless steel mesh, no rust, no deformation
- Power Handling: Peak: 550 watts RMS: 200 watts
- PWM MOSFET Power Supply/Thermal Protection Circuit Remote Subwoofer Control Included RCA and High-Level Inputs
- Delayed Soft Remote Turn On Adjustable Input Sensitivity
- Variable Bass Boost: 0 - +12 dB Variable Low-pass Filter: 85 - 150 Hz
- Constant Subsonic Filter: @ 35Hz Selectable Phase : 0 or 180 degrees
- 600 WATT POWER: Pyle’s 8" Amplified Low Profile Subwoofer System offers a maximum power of 600 watts. It lets you pump out some great low frequency bass volume to enhance the party vibe making it a great addition to your car music audio system
- BUILT-IN AMPLIFIER: The integrated amp in the compact subwoofer features low pass crossovers & a control for adjusting input sensitivity from 0.12V to 3.5V. Includes variable bass boost, control the subwoofer level w/ the remote level control module
- LOW PROFILE: With height of just 3", it's a perfect solution when space is an issue, it can easily fit under the seat of most vehicles! Total dimension is 12.8”x9.5"x3” & includes mounting hardware. A great addition to your car stereo sound system
- HIGH LEVEL INPUT: Speaker line inputs are known as high-level inputs. If your head unit does not have RCA outputs, you can use the speaker outputs for the audio source. Use the supplied cable and connect the outputs properly as shown in the manual
- LOW LEVEL INPUT: Line level inputs, also known as RCA input or low-level inputs. Low level inputs are the recommended way to introduce the audio signal to the hideaway subwoofer if RCA outputs are present on your head unit or other signal source
- Rockville RWS10CA Slim 1000 Watt 10" Amplified Powered Car Subwoofer Enclosure. 1000 Watts Peak power output.
- 300 Watts RMS CEA rated. 10" Super Slim Subwoofer. Ultra Stiff Composite Pulp Cone with Kevlar Reinforcement.
- 3D Molded Acrylic Dust Cap. Expanded & Rolled Steal Basket. High Density Laminated Foam Surround.
- High Power Strontium Magnet with Ultra Saturated High BL Motor Structure. Vented Core Magnet Motor Structure.
- 2" High Temperature Aluminum Voice Coil. 8mm Washer & Yoke Plates. 13.6mm Peak-to-Peak X-Max. 60oz. Magnet Motor Structure.
- ▶Basic parameters: peak power: 1000W, rated power: 500W, 15A fuse, speaker impedance: 4Ω, input impedance: 10KΩ, the standard input impedance can obtain larger output power without causing under-damping and bass degradation, etc.
- ▶Sensitivity: Frequency response: 30Hz-20KHz, low-pass filter: 45Hz-185Hz, S/N=95dB, THD≦0.08%. High differential frequency response, stable communication brought by high signal-to-noise ratio, low noise, excellent The anti-interference ability can provide you with a more realistic 3D surround sound effect.
- ▶Exterior Design: Premium ventilated shell made of 18mm high-density fiberboard with black felt on the sides, the reclining backrest fits the rear seat perfectly, flush and beautiful.
- ▶Suggestion for use: The audio comes with a class AB high-power amplifier, built-in frequency divider, and the amplifier has a sensitivity adjustment button (LEVEL) and a frequency control button (FREQ), and thestate is the adjustment position of 4/5. The specific effect may vary due to different vehicle host parameters, please adjust thestate by yourself.
- ▶Enclosure Specifications: Dimensions are in inches, Length 13.78'' x Height: 11.81'' x Top Width 8.27'' x Bottom Width: 11.42'', Weight: 22 lbs. Comes with 3-layer packaging to protect the product from damage in transit.
- Rockville USS8 8" 600w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub. 600 Watts Peak / 150 Watts RMS. Heavy Duty Mounting Feet. PWM MOSFET Power Supply. Low Level RCA Input..Impedance: 3 ohm.Speaker size:8 inches
- High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Green Power/Red Protect LED.
- Phase Switch: 0 Degree or 180 Degree. Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 12dB at 45Hz. Subsonic Filter: 20Hz - 50Hz. THD < 0.15%. Subwoofer Level Remote Control. Fuse Rating: Single 20A.
- Specifications: Maximum Power RMS: 150 Watts. Impedance: 3 Ohm. Dimensions: 13.6 x 9.9 x 2.9 (L x W X H) Inches. Frequency Response: 15Hz - 125Hz.
- Signal to Noise Ratio >82dB. Sensitivity: 90dB at 1w / 1m. Input sensitivity, RCA level 195mV. Input sensitivity, HIGH level 5.6V.
- Recoil SWS10 is an universal All-in-One self-contained subwoofer ported enclosure with built-in amplifier.
- Peak Power: 600 Watts / RMS 200 Watts PWM MOSFET Power Supply. Includes Recoil 8 Gauge Complete Amplifier Wiring Kit RCK8
- 2" High Temperature Aluminum Voice Coil. Ultra Stiff IMPP Cone with Kevlar Reinforcement. 30Oz. Magnet Motor Structure. High Density NBR Rubber Surround
- Blue Power/Red Protection LED Indicator. Phase Switch: 0° or 180°. Low Pass Filter: 30Hz - 150Hz. Bass Boost: 0 - 9dB @ 50Hz. Subwoofer Level Remote Control Included
- Compact Dimensions: (4.7”+8.2”) x 14.9" x 20.4". If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles
- Rockville RBV10. 1A Single 10” 500 Watts Active Subwoofer Enclosure, Size: 10”, Peak Power: 500 Watts, RMS Power: 300 Watts, Nominal Impedance: Single 4-Ohm, 1. 5” Voice Coil, Inverted Carbon Graphite Molded Dust Cap, Kevlar Reinforced Pulp Cone, Double Lami
- Frequency Response: 35Hz - 200Hz, Sensitivity: 88dB, Anti-Vibration Braced MDF Cabinet, Angled Back Fits Perfectly Against Rear Seats, Computer Tuned Bass Reflex Port, Blue/Black Aviation Grade Tweed Carpet with Embroidered Rockville Logo.
- Class AB Amplifier, High Speed MOSFET Power Supply, High Level Speaker Inputs, Low Level RCA Inputs, Built-In Low Pass Crossover (30Hz - 160Hz).
- Accepts up to 8 Gauge Wire, 100mV - 5V Input Voltage, Power (Blue) & Diagnostic (Red) LED Indicators, 20A Fuse, Dimensions in inches: Length 15. 75" x height: 12. 99" x top width 10. 63" x bottom width: 14. 17", Weight: 22. 59 lbs.
- powered polypropylene subwoofer with built-in amplifier that matches the woofer performance at 150W RMS or 450W Peak.
- 12" (305mm) woofer
- 35 - 120Hz frequency response
- Slipstream port eliminates port noise and provides distortion-free bass at high output levels
- Polypropylene Woofer Cone
- 1 100 watts Max power (300 watts nom )
- Built with high bandwidth high output and low distortion 300-watt class D amplifier
- Size 10" cone
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
Last update on 2023-03-22 / Affiliate links / Images from Amazon Product Advertising API