Our 10 Favorites:
10 Best 8 Subwoofer Car Reviews:
- Rockville RV8.2A Single 8" Bass Enclosure System With matching Mono Block Amplifier
- 800 Watts Peak Power / 250 Watts RMS CEA-2031 Rating
- Dual 8" Bass Enclosure System with matching Mono Block Amplifier
- Quasi Transmission Line Cabinet Design. Fully adjustable low pass crossover: 50Hz - 250Hz
- Bonded, Stapled and Braced 3/5" MDF Cabinet
- Rockville SS8P 8" 400w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub.
- Enclosure is made out of cast aluminum which stays cool at all times. Peak Power Handling: 400 Watts.
- RMS Power Handling: 100 Watts. Heavy Duty Mounting Feet. PWM MOSFET Power Supply. Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Overload Protection Circuit. Green Power/Red Protect LED. Phase Switch: 0° or 180°.
- Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz. THD: < 0.4%. Subwoofer Level Remote Control. Fuse Rating: Single 15A.
- Specifications: Peak Power 400 Watts. RMS Power: 100 Watts. Impedance: 4 Ohm. Dimensions (L x W X H): 11.4" x 8.3" x 2.8" Inches. Frequency Response: 20Hz - 150Hz. Signal to Noise Ratio: >90dB. Sensitivity: 90dB @ 1w / 1m. Input sensitivity, Low level: 300mV. Input sensitivity, High level: 1.0V
- 8-inch JBL BassPro SL powered under-seat compact subwoofer enclosure
- Power output: Peak: 250 watts RMS: 125 watts
- Efficient Class D amplifier
- Soft start turn-on, speaker-level (high-level) inputs with Audio Sense Auto-on
- Optional wired bass remote controller
- The Punch 300-8P is a universal "all in one" self-contained subwoofer enclosure with built-in amplifier for dropping Bass in any factory or aftermarket system
- The 8" high output subwoofer is impedance optimized for the built in 300-watt class-D amplifier in a slim design enclosure - Dimensions: 11.4" x 17.6" x 5.6"
- Featuring an adjustable 12db/Octave low pass crossover, on board adjustable bass boost EQ, and on board phase switch
- The enclosure can be connected via speaker level inputs for connection to factory systems, or traditional line level inputs for aftermarket systems
- Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
- All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
- Peak Power: 2,100 Watts | RMS Power: 1,050 Watts
- Includes x1 Skar Audio SDR-3X8D2 Triple 8" Loaded 2,100 Watt Vented Subwoofer Enclosure
- Includes x1 Skar Audio SKAR4ANL-OFC 4 Gauge Premium OFC Complete Amplifier Wiring Kit
- High Performance Aftermarket Subwoofer System | Easy to Install
- RMS Power: 150 Watts
- Ultra-compact powered subwoofer system designed for tight locations
- Dimension: 13 7/8 x 9 3/8 x 3 1/8
- 8-inch internal subwoofer
- 150-watt (RMS, 14.4v) power amplifier
- Loaded Sub Enclosure Features: Final Impedance: 2 Ohm. Peak Power Handling: 1600 Watts. CEA-2031 Compliant RMS Power Handling: 400 Watts. ¾” MDF enclosure. Bonded stapled and braced. Computer designed vents.
- Angled at 15 % for perfect bass alignment. High quality aviation grade tweed carpet. Satin Nickel speaker wire push terminals. Enclosure air space is 0.80 Cu Ft per sub. Vent dimensions: 2.5" x 6.75" x 9.75".
- Tuning frequency of enclosure: 37 Hz. 1.5" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire. The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire.
- Amplifier Features: Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote.
- CEA Compliant Power Ratings (Rated at less than 1% distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.).
- Rockville W8K9D4 8" Inch 2000W car audio subwoofer Dual 4-ohm sub CEA Compliant
- Rockville W8K9D2 K9 Series 8" Dual4-Ohm Car Subwoofer. Peak Power Handling: 2000 Watts. Program Power Handling: 1000 Watts. CEA Rated RMS Power Handling: 500 Watts. 2. 5" 4-Layer ASV Voice Coils Wound with OFC Wire Made in USA. This voice coil is stable up
- Cast aluminum basket with Black sanded finish makes this sub very efficient and lighter weight. Two chrome-plated binding post terminals.Black non-pressed paper cone with beautiful finish. Our cones are ultra-stiff. They are thicker and stronger than other
- Black stitching cone reinforcement ensures long life. New ultra-stiff polypropylene (PP) dust cap. Impedance: Dual 4-ohm Voice coils. Vented hole on t-yoke enhances heat dissipation. Special custom rubber boot magnet covers make the woofer look nice and PR
- We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are Rated. Poly cotton spider with very good elasticity. Cutout diameter: 7. 32” inches. Mounting depth: 5. 91” inches.
- New Forced-Air Cooling helps this CompRT sub run 20 percent cooler
- ONE 8" thin-mount CompRT subwoofer and a high-output reFLEX passive radiator which intensifies bass output
- Easily mounts in cargo area with no space issues, and resists stacking weight
- Minimal mounting depth without sacrificing musical punch
- True, hard-hitting KICKER bass from a shallow-mount design
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
Last update on 2023-06-06 / Affiliate links / Images from Amazon Product Advertising API