Our Top 10 Picks:
10 Best 8 Inch Subwoofer Home Reviews:
- This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.
- The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output.
- High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier.
- Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer.
- The subwoofer is housed in an attractive black wood cabinet that measures 13.75" x 11.75" x 11.75" (H x W x D). The driver and a 2 3/4" sound port are located on the front, covered by a black cloth speaker grill.
- Wireless connectivity allows for premium sound anywhere in the room. Simply connect the ultra-compact, pre-paired transmitter (included) to the subwoofer out or LFE out on your receiver. 2.4gHz connection means hi res sound with minimum latency, for clear, powerful bass with no wires.
- Injection Molded Graphite (IMG) woofers are exceptionally light while being extremely rigid – providing remarkable low frequency response, with minimal cone breakup and distortion.
- Contemporary aesthetic with absolute durability that results in a seamless integration into any décor.
- DOWN-FIRING DRIVER :The high performance driver provides deep bass and placement flexibility.
- LOW PASS CROSSOVER AND PHASE CONTROL:Allows you to blend the subwoofer’s low-frequency tones with other Klipsch speakers as well as establish the ideal level of bass.
- New twisted flare port contributes to clear and tight bass
- Advanced YST II (Yamaha Active Servo Technology II)
- 8” cone woofer
- Stylish addition to any room
- Dynamic Power: 100W (5 ohms)
- Perfect combination of style and performance
- 8" polyfiber woofer
- 100-Watt bottom mounted class D amplifier
- Ultra slim cabinet
- 100 watts RMS, 200 watts peak power output
- 8" paper cone driver with rubber surround
- Three input options: dedicated LFE, line level stereo, and speaker level stereo
- Adjustable low-pass filter, volume, and phase controls
- Small footprint - only 10.6" x 12.8"
- Powerful,Pure Home Theater Subwoofer Max to 100W: Perfect for home theater systems that need a little extra oomph. Matches well with any system. And the subwoofer is up to 100W.
- 8-INCH Subwoofer Enclosure: Kicker Dual 8-Inch 100 watt vented subwoofer enclosure is factory-tuned and vented for deep, thunderous bass.
- Easy to Integrate with Existing System: Hook up this subwoofer to the receiver and upgrade your music sound instantly! Features continuously variable 60-120 Hz crossover and 25-125 Hz frequency response.
- Outstanding Production Technology:Simple and fashionable appearance, stable black atmosphere, hard texture, good sound, so that your room is full of surround sound.
- Perfect Size:The Subwoofer size is 315MM(L)*280MM(W)*285MM(H), Great for matching soundbars or TVS of all sizes and other connected devices. It won't take up a lot of room at home, but it will fill the space where you put the Subwoofer with a powerful bass effect.
- ULTRA-COMPACT POWERED SUBWOOFER FOR EXTRA PUNCHY BASS – An 8" Dynamic Balance woofer, specially-tuned downward-firing port & on-point speaker geometry helps deliver accurate bass with added depth that pumps up your movie, games and music experience
- LOUDER CLEARER SOUND EVEN AT EXTREME VOLUME LEVELS – Features smart compression circuitry that limits distortion and gives a more balanced & thrilling music experience with rich, deep sound, even at low frequencies
- HIGH-EFFICIENCY LOUDSPEAKER – Driven by a 150-watt amplifier (300W at peak), this sub is your answer to more power in a small footprint. It takes about one square foot of floor space and fills any room with incredible sound wherever you place it
- PERFECTLY BLENDS WITH YOUR EXISTING SYSTEM – Timbre-matched with other Polk speakers from TSI, RM & R/T/M Series, this sub hooks to any receiver. No hassles, no extra connections. Upgrade your home theater and entertainment
- A SLEEK DETACHABLE GRILLE on the front, along with LFE line-inputs, as well as speaker-level inputs and outputs on the back, and Low-Pass Filter & Phase Toggle Switch, make this sub COHESIVE & COMPLETE, especially at this price
- The 8 inch driver in ASW608 is designed for fast tight and dramatic bass - even in very small rooms
- Under the skin of ASW608 is a powerful amplifier that gives it the ability to hit hard with music and movies
- 200W Power Output
- Signal/noise <90db
- Dimensions: 11.3x10.2x11.99 inches
- Rockville Rock Shaker 8 Black 400 Watt Powered 8" Home Theater Subwoofer.
- 400 Watts Peak / 200 Watts RMS. Built-in Class D Amplifier. Enclosure is made of top quality MDF wood. (MDF wood sounds better and lasts longer than particle board). High-grade vinyl enclosure covering with a beautiful finish. The enclosure is built with the perfect air space to maximize sound quality and punch. The rear firing port is engineered for optimal sound.
- Class “D” Amplifier Circuitry with Auto-Switching Power Supply. High-grade woofer with foam surround and paper cone. Woofer has a Y30 grade magnet, and 1. 5” 4-layer voice coil. Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound! . Enclosure is filled with fire resistant poly cotton. Detachable foam grill. Inputs / Outputs / Controls: . . RCA line input. RCA line output. Speaker High level inputs. Speaker High level outputs.
- Volume control. Phase switch (0°-180°). Crossover Frequency control. Power switch. Standard IEC power cable included. Specifications: . . Amplifier: Class D. Woofer Impedance: 4 Ohm. Signal to noise ratio: 85 dB (Maximum output with THD+1<1%, A-weight). THD: 1%. INPUT sensitivity: 88dB +/- 2dB. Frequency Response: 20 Hz - 200 Hz. 400 Watts peak output. 200 Watts RMS output. Voltage: 110-240V.
- Product Dimensions in Inches: (W*H*D): 11. 8'' x 15'' x 13. 8''. Shipping Dimensions in Inches: (W*H*D)14. 6 ''x 18. 3'' x 18. 9 ''. Unit Weight: 18 LBS. Shipping Weight: 22 LBS. Color: Black
- Slim Form Factor: At 7" in height, this subwoofer can be stored under most sofas and beds or on its side if there is space between the back of the couch and the wall
- Powerful Amplifier: Built-in 150W continuous / 300W peak high efficiency amplifier, 20Hz–180Hz frequency response with 40Hz–120Hz 12dB/Oct variable crossover, Auto/On/Off signal sensing, 0–180 degree phase control, and high level inputs with crossed high level outputs
- Bass to Unused Space: Offers flexibility and concealment without sacrificing floor space allowing for closer proximity to the listener for added tactile sensation and better bass response time
- Down Firing Woofer: 8" down firing active driver with 2" high temperature voice coil and santoprene surround increases output by using the floor as an acoustic amplifier
- Ported Enclosure: 3" side ported bass-reflex enclosure design is utilized to maximize output at your seating position and better low end extension
Last update on 2023-03-28 / Affiliate links / Images from Amazon Product Advertising API