Our 10 Recommendations:
Our Favorite 60-Gallon Air Compressor Reviews:
- Features an Oil-Lubricated, two stage pump to increase the compressor's longevity
- Designed to tackle a wide variety of jobs, from rotating wheels, painting furniture, grinding welds and heavy duty nailing
- 230 volt, 3. 7 Horsepower, heavy-duty induction motor creates maximum pressure to operate a wider range of tools while maintaining longer air compressor run times
- 60 gallon vertical ASME tank maximizes floor space, leaving a reduced product footprint
- 175 PSI max pressure, 7.6 SCFM @ 90 PSI and 6.9 SCFM @ 175 PSI
- Long-Life: Durable cast iron construction, long-lasting extended pump life designed for over 5,000 hours of trouble-free use
- Maximum Power and Flexibilty: 100% continuous duty, high pressure operation up to 135 psig and a 60 gallon vertical ASME receiver tank provide plenty of punch for the most demanding applications
- Easy Operation: Automatic start/stop pressure switch control, fully assembled and pre-wired delivery, easy to change filter, oil sight gauge and easy to fill oil port simplify operation and maintenance
- Advanced Safety Features: Manual thermal overload protection of the motor and a totally enclosed belt guard provide constant protection
- Reliable Operation: All Season Select synthetic lubricant increases efficiency; with 2,000 hours of service between changeouts, it performs four times longer than petroleum-based lubricants
- 175 maximum PSI provides more than 2X longer air tool run time + 11.5 SCFM at 90 PSI is 30% higher PSI vs. other 60 Gallon 135 PSI Air Compressors
- Equipped with large capacity ASME tank and a long-life oil lubricated pump with high efficiency aluminum flywheel to provide maximum cooling
- Spread volt motor designed to operate at 208-Volt and 230-Volt applications
- Equipped with pressure gauge and on/off switch
- Tie down holes on platform sides to secure unit when transporting
- Ultra quiet only 75 decibels
- Oil-free pump for less maintenance & costs
- 60.0 gallon steel ASME air tank
- Two powerful 2.0 HP (rated/ running) motors
- 10.60 CFM at 90 PSI and 12.60 CFM at 40 PSI
- Industrial performance delivers maximum CFM @ 175 PSI; provides enough power to operate more than one air tool or Device at one time
- Patented Pump design provides for a cooler Running Pump: industrial style air intake filter; easily Accessible Oil level sight glass and Oil drain with 4” extension; low Pump RPM
- Electric motor with Thermal Overload protection: protects the motor from voltage fluctuations and magnetic starter not required
- Large capacity, 60 gallon ASME* air receiver with large ¾” air outlet port.Amperage:22 amps
- Equipped with Tank pressure gauge and on/off switch and wire form belt guard improves Compressor cooling
- Durable cast iron oil-lubricated pump has one-piece cast iron crankcase and full cast iron cylinder body
- Durable Swedish stainless steel reed valves deliver long service life
- 2-cylinder design for low heat transfer between cylinders
- Heavy-duty 230V induction motor runs at 3,450 RPM for maximum performance and efficiency
- 60-gallon ASME-certified vertical tank provides more air for longer run times on air tools such as ratchets, impact wrenches, spray guns, hammers and more
- Campbell Hausfeld Replacement VT4923 3 Hp Cast Iron Air Compressor Pump Flywheel VT470000KB VT471400AJ VT232605KB VT472200AJ
- Fits virtually all 3 - 3.7rhp air compressors manufactured by Campbell Hausfeld. (incl. Speedaire, Cobalt, Westward, Husky, etc.)
- Some Campbell Hausfeld models: VT6275, VT6271, VT6276, VT6242, VT5587, VT6182, VT6195, VT6314, VT6355, VT6359, VT6390, VT6395, VX8314 (just a sample).
- Speedaire model numbers: 4B244, 4B245, 4B246A, 4B247A, 4B236, 4B237 & 4ME96. Replaces VT470000KB, VT472200AJ and VT471400AJ (Speedaire model 4B236, 4B237, 4B244, 4B245, 4B246 and 4B247 series).
- 1 Stage * Voltage (volts): 120 Volts or 240 Volt applications. * Pump Housing Material: Cast Iron * Pump Type: cast iron * Horsepower: 3hp to 3.7hp (running) * Up to 10.3 SCFM at 90 PSI. * Tank capacity: Ranging from 13 gallon to 60 gallon tanks.
- Solid cast iron, oil lubricated, twin cylinder pump with aluminum head to dissipate heat
- 155 PSI max pressure allows the user optimum tool performance
- Heavy duty 3.7HP induction motor in the air compressor for long life
- Pump in the electric air compressor delivers a max PSI of 155, 13.4 SCFM at 40 PSI and 11.5 SCFM at 90 PSI
- 12 in. balanced fly wheel with durable wire belt guard
- Oversized air filter/silencer is 99.7% efficient at 2 microns, delivering clean, contaminant free air to the pump
- The head and valve plate is an advanced design that features Viton high temperature O-rings for leak proof sealing
- Pistons feature 3-piece ring set for excellent oil control
- Two-piece connecting rods include needle bearings for high load capabilities and long life
- The crankshaft is fabricated of ductile iron and is optimally balanced for smooth, low vibration operation
Last update on 2023-02-02 / Affiliate links / Images from Amazon Product Advertising API