Best 5 Channel Amp to Buy in 2022

Sometimes it might be quite difficult to find the best 5 channel amp. With every niche market offering so many different products, it makes sense that this is the case.

Unfortunately, this very fact can make it incredibly difficult to find the item that best suits your needs, which is why we’ve put together this 5 channel amp buying guide.

We Recommend:

The 10 Top 5 Channel Amp Reviews:

SaleBestseller No. 2
CERWIN Vega CVP2500.5D CVP Series 5-Channel Class-D Amplifier (1100W Rms)
  • Easy-To-Install - Tight And Accurate Bass
  • Package Dimensions :8.1 Cm L X26.7 Cm W X48.0 Cm H
  • 2 Ohm Stereo, 4 Ohm Bridged Full Range Operation
  • Package Weight :6.0Lbs
  • Frequency Response: 10 Hz To 32 Khz + 10 Hz To 400 Hz
Bestseller No. 3
Kenwood X802-5 eXcelon 5 Channel 1600 Watts Max Power Car Audio Amplifier
  • High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.
  • Output Coil with Magnetic Shield prevents magnetic flux from radiating from the subwoofer's coil, resulting in reduced noise and enhanced sound quality.
  • Detachable sliding terminal cover offers a sleek design and easier installation.
  • All terminals and connections are on one side for easier installation and a cleaner look.
  • Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.
Bestseller No. 4
MB Quart FA1-900.5 5 Channel Car Audio Amplifier (Black) - Class SQ Amp, 900-Watt, Variable Electronic Crossover, LED System Protection, Heavy Duty Connections, Bass Remote Included
  • INNOVATIVE TOPOLOGY - Use of Class SQ (Class A/B) for full range and a Class Q1 (Class D) amplifier to drive the subwoofer frequencies. The 5 channel operation uses Q-Stasis pre amplifier stage for maximum low voltage signal to minimize distortion.
  • COMPLETE SOUND CONTROL - Variable electronic crossovers allow for complete control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specs for specific frequencies for this amp.
  • HI LEVEL INPUTS - The DC Signal Sense switch allows the amp to turn on when a signal is received on the RCA inputs, so an amplifier remote turn on wire is not needed to turn on the amplifier (this feature can be turned off).
  • HEAVY DUTY CONNECTIONS - High quality connections allow for secure electrical signal to pass into wiring and resist erosion which will add longevity to the amplifier. Secure connection is made for all power, ground and speaker connections.
  • POWERFUL - Output devices are selected for their ability to efficiently produce power and mimic the sound quality of the highest end home amplifiers. MOSFET power supply allows amp to produce efficient power without taxing the electrical system.
SaleBestseller No. 5
BOSS Audio Systems PV3700 5 Channel Car Stereo Amplifier – 3700 High Output, 5 Channel, 2/4 Ohm Stable, Low/High Level Inputs, High/Low Pass Crossover, Full Range, Bridgeable, for Subwoofer
  • Power - 550 Max x 4 @2-Ohms, 275 Max x 4 @4-Ohms, 1100 Max x 2 Bridged @4 Ohms
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
  • Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
  • Specs - Dimensions: 17” x 10.31” x 2.25”, Weight: 12.53 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 103 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 2 40 Amp ATO Blade
  • BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
Bestseller No. 6
Rockville RXH-F5 3200 Watt Peak/1600w RMS 5 Channel Amplifier Car Stereo Amp
  • Rockville RXH-F5 3200 Watt Peak/1600w RMS 5 Channel Car Stereo Amplifier. CEA Compliant Power Ratings:. 4 Ohms: 550 Watts (4 x 50 Watts + 1 x 350) at 4 ohms and 1% THD+N. 2
  • Channels 1 through 4 are class A/B and channel 5 is mono class "D". High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry.
  • CH3 & CH4 Low Pass 500Hz - 3KHz. CH5 Low Pass 50Hz - 250Hz. CH3 & CH4 High Pass 50Hz - 1KHz. High Level Input Auto Start Smart Turn-On. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable Bass Equalization Control.
  • 2 Ohm Stable Stereo. 4 Ohm Mono Bridgeable. 3 Channel Mixed-Mono Capable. Channel 5 - 2 Ohm Mono Capable. 2 CH / 4 CH / 5 CH Input Mode Selector.
  • ELNA Brand Audiophile Quality Capacitors. Status Mode LED Indicator. Minimum THD at Rated Power: < 0.05%. S / N Ratio: > 100dB.
Bestseller No. 7
Rockville dB55 4000 Watt/1000w CEA RMS 5 Channel Amplifier Car Stereo Amp, Loud!
  • Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.
  • Rockville dB55 4000 Watt/2000 Watt RMS 5 Channel Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 120 Watts x 4 + 500 Watts x 1 <1% THD+N. 4 Ohm: 80 Watts x 4 + 300 Watts x 1 <1% THD+N.
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc). 2 Ohm 240 Watts x 4 + 1000 Watts x 1. 4 Ohm: 160 Watts x 4 + 600 Watts x 1. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm 480 Watts x 4 + 2000 Watts x 1. 4 Ohm: 320 Watts x 4 + 1200 Watts x 1.
  • High-Speed MOSFET Power Supply. Rugged switching MOSFETs for Class D in CH5. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Optical Coupler Class “AB” +“D” Technology. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: (CH1-CH4)40Hz –4KHz /(CH5)50Hz –250Hz. High Pass Filter: 15Hz – 4KHz. Subsonic Filter: 15Hz - 55Hz.
  • Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: < 0.05%. S / N Ratio: >90dB. Frequency Response: 15-35KHz. Damping Factor: >[email protected] 100Hz. 40 Amp x3. Dimensions: (W x H x L) 9'' x 2.4' x 18.6".
Bestseller No. 8
Soundstream PN5.640D Picasso Nano 640 W 5-Channel Class D Digital Car Audio Amplifier
  • PN5.640D - Soundstream 5-Channel 640W RMS Picasso Nano Series Class D Amplifier
  • RMS Power Rating: 4 ohms: 60 watts x 4 chan. + 200 watts | 2 ohms: 80 watts x 4 chan. + 350 watts | 4 ohms Bridged: 160 watts x 2 chan. + 350 watts
  • Full MOSFET PWM Power Supply
  • SMD Technology on Double Sided PCB
  • Dimensions: 4.75"W x 1.5"H x 10.3" L
Bestseller No. 9
Kicker 46CXA6605 Car Audio 5 Channel Amp Speaker & Sub 1200W Amplifier CXA660.5
  • Kicker 46CXA6605 Car Audio 5 Channel Amp Speaker & Sub 1200W Amplifier CXA660.5
Bestseller No. 10
Rockford Fosgate R600X5 Prime 5-Channel Amplifier,BLACK
  • 50 Watts x 4 + 200 Watts x 1 @ 4-Ohm / 75 Watt x 4 + 300 Watts x 1 @ 2-Ohm
  • Accepts High Level & RCA Level Input; Remote PLC (Punch Level Control) - Sub Channel
  • Cast aluminum heatsink with Top Mount Controls
  • 12dB/octave crossover. MOSFET power supply
  • 4 Gauge power/ground connectors. The R600X5 produces up to 75 Watts into each of its four channels with a dedicated subwoofer channel capable of producing 300 Watts into 2-Ohms.

Last update on 2022-11-27 / Affiliate links / Images from Amazon Product Advertising API

How to find the best 5 channel amp?

Here, we’ll be going over a number of factors that you can use to ensure that you’re purchasing the best 5 channel amp for you.

Regardless of which type of item you’re looking to buy, chances are that there are existing buying guides on the internet, all of which aim to give you good 5 channel amp recommendations.

Despite these recommendations, however, it’s always a good idea to do your own research. In addition to this research, asking yourself the following questions is also super helpful:

  • What features does the 5 channel amp need to have to be perfect for my needs?
  • What is my budget?
  • Do I need to purchase a certain brand?

Once you’ve answered these questions and have a good idea of what you’re looking for and the buying process becomes much easier. Keep in mind that when looking for the best product, there’s no need to rush. In fact, very rarely are the ideal products found by choosing the first one you see or by basing your decisions on only one factor. Take your time and enjoy the process!

Now, with the answers to the previous questions in mind, we urge you to use our upcoming buying guide for 5 channel amp to find what you’re looking for:

Brand

In some cases, the brand of 5 channel amp is very important. For example, if you’re looking for an item that works in tandem with another, you might very well need both products to be the same brand. If this is the case, it’s vital to pay attention to this factor, as choosing the wrong product can mean the difference between wasting your money and buying a great product that functions as it should.

Features

The features in any given 5 channel amp are important because they can dictate which version of an item you need and how much money you need to spend. Consider all the key features that you want your item to have and don’t settle for anything that doesn’t check at least ¾ of your boxes.

Reviews

Customer reviews about 5 channel amp are crucial – especially when you’re buying a product that costs a lot of money or serves a big importance. Luckily, most products can be found online, which means that it’s common for there to be scores of customer reviews from those who have already purchased any given product.

Pay attention to these reviews. Take note of the pros and cons that they mention, and factor these into your big decision. In some cases, you’ll be forced to sacrifice one con in order to gain a particular pro, but being aware of the potential con is going to be beneficial in either case.

Quality

Of course, quality is key. You don’t want to purchase a low-quality product. If you do, you run the risk of your item breaking, not working properly, or otherwise proving to be very disappointing, as well as a waste of money.

You can compare 5 channel amp quality by researching what your potential purchases are made from, contrasting the individual items against each other to discern which one is made of the best materials.

Warranty

Warranty isn’t always going to be important, but it definitely can be. This is especially true if the item in question is tech-related or expensive. A good warranty will be valid for an extended time after purchase and cover a variety of problems ranging from item defects to random accidents, water damage, and other miscellaneous events that could ruin your product.

Conclusion

The quest to find the best 5 channel amp can be daunting – but it doesn’t have to be. It can be made much easier by asking yourself a few simple questions and then thinking critically about the items you want to buy. Consider their features, quality, brand, warranty, and customer reviews and you’re more likely to make a great purchase.