We Recommend:
Best 4 Channel Amp For Door Speakers Reviews:
- Power - 100 Watts Max X 4 @2-Ohms, 50 Watts Max X 4 @4-Ohms
- Class A/B Topology - Class ‘A’ Amplifiers Have Enormous Amount Of Current Flowing Through Its Output Transistors With No Audio Signal. Class ‘B’ Amplifiers Have No Current Flowing Through Its Outputs With No Audio Signal
- Full Range - With A Full Range Amplifier You Not Only Have The Option To Run Your Speakers, But Also Your Subwoofers
- Variable Gain Control - The Gain Control Is Not For Adjusting Volume. It Simply Adjusts The Amount Of Signal That Is Coming From Your Receiver And Going To Your Amplifier
- 500-Watt MOSFET 4-Channel Class A/B Power Car Amplifier
- RMS Power at 2 Ohms: 125 Watts x 4 Channels
- RMS Power at 4 Ohms: 75 Watts x 4 Channel
- User Adjustable Controls: Gain, Variable LPF, HPF, Bass EQ Switch (0, +6, +12 dB)
- 4 Way Protection Circuitry | Frequency Response: 20 Hz - 20,000 Hz
- Digital Amplifier Technology
- Speaker Level Input w/ Signal Sensing Turn-on
- 2 Ohms Load Capability. High Pass Filter : 50Hz-200Hz, -12dB/oct (A/B)
- Power MOS-FET Switching Power Supply
- 1m (3.3ft) RCA Cable
- Power - 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- country of origin : China
- package weight :7.95lbs
- package weight :7.95lbs
- Product type :SPEAKERS
- One group of stereo RCA (CH3 and CH4) can be used as audio input or output by switching the selector, to acheive different demands
- Supporting wired 2 groups of stereo RCA and wireless Bluetooth 5.0 input, compatible with most common audio device such as phones, computers, TVs, MP3, TV, CD players etc. With U-disk input, it can be used as a digital music player, supporting MP3, WAV, APE, FLAC and WMA lossless formats.
- With 4 groups of speaker sockets output, they can output at the same time and each channel with independent volume control. Its max output power can reach 50W×4, and equipped with high-quality 24V/4.5A power supply, enough to drive most home speakers.
- Reasonable circuit layout, concise wiring and high-quality components to ensure HiFi clear sound and long time stable work. Separate design of small and large signal circuit for better circuit protection. Bluetooth 5.0 version with high-gain antenna, ensure more stable and faster transmission.
- Propersize with exquisite appearance, aluminum alloy case is CNC machined and with anodizing process, more fashionable and durable, very suitable for home, office and desktop audio system use.
- 1500W Maximum Power Full-Range Amplifier
- Optimized 150-watt RMS output and a max power output of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
- This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system
- Bridgeable
- Variable input voltage
- QTD (Quick Thermal Dispersion) technology heat sink
- Low-noise preamp
- Ultra Compact MOSFET Full-Range 4-Channel Class D Car Amplifier
- RMS Power @ 2 Ohms: 140 Watts x 4 Channels (14.4v)
- RMS Power @ 4 Ohms: 100 Watts x 4 Channels (14.4v)
- Crossover Controls: HPF / Full-Range / LPF | Frequency Response: 10Hz - 40kHz
- Hi-Level Input Connections: Yes | 8 Gauge Power and Ground Input Terminals
- 100 W MAX Power @ 2 Ohm x 4 Channels
- 50 W MAX Power @ 4 Ohm x 4 Channels
- Full-Range, Class A / B Topology
- Low and High Level Inputs, Variable Input Gain Control
- DS 800X4 1 Ohm: For STEREO connections, the minimum impedance is 1 ohm at each channel and for BRIGDE connections is 2 ohms
- Positive / negative power supply cable: 7 AWG
- Protection fuse or circuit breaker: 60A
- Frequency Response (Full Range): 10Hz - 22KHz (-3dB)
- HPF (High Pass Filter): 90Hz (-12dB/8ª) Fixed
- HUGE POWER IN A SMALL PACKAGE - 1,600 Watts gives you all the power you need tucked away and out of sight, keeping your vehicle looking clean and neat.
- WIDE RANGE OF APPLICATIONS - Ranging from 2-8 ohms, this amplifier will allow you to use a variety of speakers for your specific application. Never again will you need to worry about having the right amp for the job.
- EXTREMELY POWER EFFICIENT AMPLIFIER - Push an amazing amount of power to your system while only drawing minimal power from your vechicle's battery.
- COMPACT MINI DESIGN - When we say compact we mean it. This powerhouse is only 9'" x 5" x 2". With those dimensions, you can put this just about anywhere!
- NEVER STOP INNOVATING ATTITUDE - DS18 stands out from other brands with our progressive designs and unwavering commitment to delivering the most technologically up-to-date products on the market.
- Power - 200 Watts Max x 4 @2-Ohms, 100 Watts Max x 4 @4-Ohms, 400 Watts Max x 2 Bridged @4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal. Efficiency is the name of the game
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- PRO Series 2-Channel High Power Line Output Converter
- Designed to optimize audio levels between radio and amplifier to achieve the best audio quality
- Ideal for use when adding an amplifier to an OEM system
- Configurable for speaker level or RCA level input/output
- Single dial, precision matched stereo, level gain adjustment
- Excellent for voice as well as bass
- 2 ohms
- 400 watts
- 4 channels
- Bass boost
Last update on 2023-02-06 / Affiliate links / Images from Amazon Product Advertising API