Our 10 Best Picks:
The 10 Top 2 Channel Car Amplifier Reviews:
- Optimized 563-watt RMS and a max output power of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying
- 750 watt maximum power full-range amplifier Compactly built so this amplifier can fit perfectly into any trunk Blaupunkt 750 Watt Monoblock Amplifier
- Stable at 1 ohm | Remote Subwoofer Level Control Included Highly Efficient Heatsink Design allows for Maximum Reliability & Performance of channel: 2/1 Channel
- Featuring 2-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150. Max. Output Power
- You'll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ, and variable adjustment tunings for gain level,
- 1,200 watts max
- 600 watts x 2 at 2 ohms
- 300 watts x 2 at 4 ohms
- 1,200 watts x 1 at 4 ohms mono bridged
- Frequency response: 10 Hz to 22 kHz
- 500 watts Max power
- Package Dimensions: 30.7 H x 10.9 L x 22.9 W (centimetres)
- Package Weight: 1.692 kilograms
- Country of Origin : China
- Features: class-a/B 2-ohm stable 2-channel amplifier. Rms power rating: 4 ohms: 50 watts x 2 channel | 2 ohms: 70 watts x 2 channel | 1 ohm: ------------n/a------------ | bridged, 4 ohms: 140 watts x 1 channel | total power output: 600 watts. Pulse width modulated MOSFET power supply, LED power (green) and protect (red) indicators, soft start turn-on, 2 or mono channel operation, 1 pair of preamp outputs to connect multiple amplifiers, 3-way protection circuitry (Thermal, overload, and speaker short p
- 2 channels x 1,000 watts @ 2 ohms
- 2 channels x 500 watts @ 4 ohms
- 1 channel x 2,000 watts (mono bridged) @ 4 ohms
- Operates in stereo, bridged mono, or stereo/bridged mono simultaneously
- Variable electronic crossover: 12 dB per octave
- 600 W MAX Power @ 2 Ohm x 2 Channels
- 300 W MAX Power @ 4 Ohm x 2 Channels
- 1200 W MAX Bridged Power @ 4 Ohm x 1 Channels
- Full-Range, Class A / B Topology, MOSFET Power Supply
- Low and High Level Inputs, Variable Filter, Variable Bass Boost
- 125 watts RMS x 6 at 4 ohms (200 watts RMS x 6 at 2 ohms)
- 400 watts RMS x 3 bridged at 4 ohms (4-ohm stable in bridged mode)
- all controls and adjustments accessible via PC, Android, or iOS device (AudioControl's Smart-User DSP software included)
- variable high- and low-pass filters (20-20,000 Hz, 12 or 24 dB/octave)
- Includes ACR-3 Dash Remote
- 400W RMS / 800W MAX POWER: The Lanzar 800 watt 2 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 400W x 2 output at 4 ohms or 800W x 1 bridged output at 2 ohms for a high quality audio
- FULL RANGE CROSSOVERS: This product features a low / high pass variable crossover for versatility and precise control by being able to fine tune your music. The speaker / subwoofer terminals are to guarantee high conductivity and minimum signal loss
- MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output
- SHORT CIRCUIT PROTECTION: This 2 ch amp is also equipped with a 2x30 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions
- SLIM SIZE DESIGN: Measuring only 10.63''W x 1.78''H x 7.48''L, this amplifier has a slim size design and comes complete with all required mounting hardware for easy installation
- Power - 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- 1400 WATT POWER: The Pyle Dual Channel Car Amplifier is perfect for your vehicle's sound system. Gives you up to 1400W bridgeable output. Features switchable bass boost, variable gain control, configurable electronic crossover network
- GOLD-PLATED RCA PORTS: The RCA ports are gold-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality audio. Features switchable bass boost, low level inputs
- MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your compact speakers providing you with crisp and clear audio for an outstanding music experience. Also features anti-thump turn on
- THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality sound in a sturdy form factor
- SLIM SIZE DESIGN: This box amp's small size makes installation a breeze - you'll have no trouble finding a spot for this little yet powerful device. Additional features include LED indicators, RCA outputs, soft turn-on circuit, remote turn on/off
Last update on 2023-03-28 / Affiliate links / Images from Amazon Product Advertising API