Best 2 Channel Amp For Mids And Highs for 2022 (Review)

Sometimes it might be quite difficult to find the best 2 channel amp for mids and highs. With every niche market offering so many different products, it makes sense that this is the case.

Unfortunately, this very fact can make it incredibly difficult to find the item that best suits your needs, which is why we’ve put together this 2 channel amp for mids and highs buying guide.

Our 10 Recommendations:

Best 2 Channel Amp For Mids And Highs Reviews:

Bestseller No. 1
BLAUPUNKT 750W 2-Channel, Full-Range Amplifier (AMP7502)
  • 750 watt maximum power full-range amplifier
  • Amplifier Class: AB
  • No. of channel: 2/1 Channel
  • Max. Output Power: 750W x 2
SaleBestseller No. 2
Planet Audio AC600.2 2 Channel Car Amplifier - 600 High Output, Full Range, Class A/B, 2 - 4 Ohm Stable, Mosfet Power Supply, Bridgeable
  • Power - 300 Max x 2 @ 2 Ohms, 150 Max x 2 @ 4 Ohms, 600 Max Bridged x 1 @ 4 Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
SaleBestseller No. 3
TARRAMPS Four Channel High Power Car Audio Amplif (TS2000X4)
  • Number Of Channels : 04
  • Country Of Origin : China
  • Maximum Power : 12.60 Vdc - 4
  • Product Dimensions: 6 X 6 X 6 Inches
Bestseller No. 4
2 Channel Car Stereo Amplifier - 1400W Dual Channel Bridgeable High Power MOSFET Audio Sound Auto Small Speaker Amp w/ Crossover, Bass Boost Control, Gold Plated RCA Input Output - Pyle PLA2200, Black
  • 1400 WATT POWER: The Pyle Dual Channel Car Amplifier is perfect for your vehicle's sound system. Gives you up to 1400W bridgeable output. Features switchable bass boost, variable gain control, configurable electronic crossover network
  • GOLD-PLATED RCA PORTS: The RCA ports are gold-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality audio. Features switchable bass boost, low level inputs
  • MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your compact speakers providing you with crisp and clear audio for an outstanding music experience. Also features anti-thump turn on
  • THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality sound in a sturdy form factor
  • SLIM SIZE DESIGN: This box amp's small size makes installation a breeze - you'll have no trouble finding a spot for this little yet powerful device. Additional features include LED indicators, RCA outputs, soft turn-on circuit, remote turn on/off
Bestseller No. 5
2 Channel Car Stereo Amplifier - 5000W High Power 2-Channel Bridgeable Audio Sound Auto Small Speaker Amp Box w/MOSFET, Crossover, Bass Boost Control, Silver Plated RCA Input Output - Pyramid PB3818
  • 5000 WATT POWER: The Pyramid 2 Channel Car Amplifier is perfect for your vehicle's sound system. It gives you up to 5000W bridgeable output. Features variable bass boost, variable gain control, and fully adjustable electronic crossovers
  • SILVER-PLATED RCA PORTS: The car audio amplifier features RCA ports that are silver-plated for eliminating signal loss. The subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality audio
  • MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean distortion-free signal to your compact speakers providing you with crisp and clear audio for outstanding music experience. Also features pulse width modulation system
  • FULLY PROTECTED CIRCUITRY: To keep both your car and the stereo amp safe, this model is equipped w/ overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high-quality sound in a sturdy form factor
  • SLIM SIZE DESIGN: The car amp's small size makes installation a breeze, easy finding a spot for this little yet powerful device. Additional features include remote turn on, soft turn on/off the circuit, heavy-duty aluminum alloy heat sink & LED indicator
SaleBestseller No. 6
BOSS Audio Systems PF1800 4 Channel Car Amplifier - 1800 Watts, Full Range, Class A-B, 2-4 Ohm Stable, Mosfet Power Supply, Bridgeable
  • Power - 450 Watts Max x 4 @2-Ohms, 225 Watts Max x 4 @4-Ohms, 900 Watts Max x 2 Bridged @4 Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
  • Mosfet Power Supply - A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
Bestseller No. 7
Skar Audio RP-75.4AB 500 Watt Full-Range Class A/B 4 Channel Car Amplifier
  • 500-Watt MOSFET 4-Channel Class A/B Power Car Amplifier
  • RMS Power at 2 Ohms: 125 Watts x 4 Channels
  • RMS Power at 4 Ohms: 75 Watts x 4 Channel
  • User Adjustable Controls: Gain, Variable LPF, HPF, Bass EQ Switch (0, +6, +12 dB)
  • 4 Way Protection Circuitry | Frequency Response: 20 Hz - 20,000 Hz
Bestseller No. 8
Skar Audio VX4-ST 4-Inch 600 Watt High Compression Titanium Bullet Super Tweeter, Each
  • 4-inch High Compression Titanium Bullet Super Tweeter (sold individually)
  • Max Power: 600 Watts | RMS Power: 300 Watts
  • 1.75" High Temperature Kapton Voice Coil | Impedance: 4 Ohms
  • In-line Capacitor Crossover Included and Connected to Positive Terminal
  • Frequency Response: 2.5 kHz - 20 kHz | Sensitivity: 102 dB
SaleBestseller No. 9
Crunch PowerDriveX 1000 Watt 4 Channel Exclusive Blue A/B Car Stereo Amplifier
  • 1000 watt 4 channel PowerDriveX series class AB car amplifier
  • Low noise pre amplifier
  • Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
  • Low level RCA inputs and outputs
  • Highest sound quality connection
Bestseller No. 10
Blaupunkt 1500W 4-Channel, Full-Range Amplifier
  • 1500W Maximum Power Full-Range Amplifier
  • Optimized 150-watt RMS output and a max power output of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
  • This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system

Last update on 2022-11-30 / Affiliate links / Images from Amazon Product Advertising API

How to find the best 2 channel amp for mids and highs?

Here, we’ll be going over a number of factors that you can use to ensure that you’re purchasing the best 2 channel amp for mids and highs for you.

Regardless of which type of item you’re looking to buy, chances are that there are existing buying guides on the internet, all of which aim to give you good 2 channel amp for mids and highs recommendations.

Despite these recommendations, however, it’s always a good idea to do your own research. In addition to this research, asking yourself the following questions is also super helpful:

  • What features does the 2 channel amp for mids and highs need to have to be perfect for my needs?
  • What is my budget?
  • Do I need to purchase a certain brand?

Once you’ve answered these questions and have a good idea of what you’re looking for and the buying process becomes much easier. Keep in mind that when looking for the best product, there’s no need to rush. In fact, very rarely are the ideal products found by choosing the first one you see or by basing your decisions on only one factor. Take your time and enjoy the process!

Now, with the answers to the previous questions in mind, we urge you to use our upcoming buying guide for 2 channel amp for mids and highs to find what you’re looking for:

Brand

In some cases, the brand of 2 channel amp for mids and highs is very important. For example, if you’re looking for an item that works in tandem with another, you might very well need both products to be the same brand. If this is the case, it’s vital to pay attention to this factor, as choosing the wrong product can mean the difference between wasting your money and buying a great product that functions as it should.

Features

The features in any given 2 channel amp for mids and highs are important because they can dictate which version of an item you need and how much money you need to spend. Consider all the key features that you want your item to have and don’t settle for anything that doesn’t check at least ¾ of your boxes.

Reviews

Customer reviews about 2 channel amp for mids and highs are crucial – especially when you’re buying a product that costs a lot of money or serves a big importance. Luckily, most products can be found online, which means that it’s common for there to be scores of customer reviews from those who have already purchased any given product.

Pay attention to these reviews. Take note of the pros and cons that they mention, and factor these into your big decision. In some cases, you’ll be forced to sacrifice one con in order to gain a particular pro, but being aware of the potential con is going to be beneficial in either case.

Quality

Of course, quality is key. You don’t want to purchase a low-quality product. If you do, you run the risk of your item breaking, not working properly, or otherwise proving to be very disappointing, as well as a waste of money.

You can compare 2 channel amp for mids and highs quality by researching what your potential purchases are made from, contrasting the individual items against each other to discern which one is made of the best materials.

Warranty

Warranty isn’t always going to be important, but it definitely can be. This is especially true if the item in question is tech-related or expensive. A good warranty will be valid for an extended time after purchase and cover a variety of problems ranging from item defects to random accidents, water damage, and other miscellaneous events that could ruin your product.

Conclusion

The quest to find the best 2 channel amp for mids and highs can be daunting – but it doesn’t have to be. It can be made much easier by asking yourself a few simple questions and then thinking critically about the items you want to buy. Consider their features, quality, brand, warranty, and customer reviews and you’re more likely to make a great purchase.